Utilization of topology optimization and generative design for drone frame optimization
- 4 April 2025
- journal article
- research article
- Published by Emerald Publishing in Aircraft Engineering and Aerospace Technology
- Vol. 97 (7) , 813-823
Abstract
Purpose: This study presents the process of optimizing a DJI F450 quadcopter using two optimization methods: topology optimization and generative design. The goal was to improve the overall performance of the unmanned aerial vehicle (UAV) by altering its geometry and comparing the use of different materials. The purpose of this paper is to reduce the mass of the original DJI F450 frame by 10%. Design/methodology/approach: To enable optimization using both methods, modifications were made to the original DJI F450 frame. A total of five cases were prepared: one for the original DJI F450 frame, three for topology optimization and one for generative design. Appropriate constraints were applied to simulate the real-world forces acting on the drone during flight. The various optimized frame designs underwent static analysis to evaluate stress, strain, displacement and safety factors. These results were then compared with those of the original DJI F450 frame, which also underwent static analysis. Findings: The results revealed that the optimized DJI F450 frames could achieve improved performance under flight-like load conditions, with reduced mass and comparable stress and strain levels. This demonstrates that engineering optimization, combined with additive manufacturing, can yield superior results, producing lighter, more capable organic structures compared to traditional frames. Originality/value: This research offers a novel perspective on optimizing UAV frames using topology optimization and generative design. The findings contribute to a deeper understanding of how engineering optimization, combined with additive manufacturing, can produce lighter, more capable structures for UAVs.Keywords
This publication has 19 references indexed in Scilit:
- SolidWorks-based topology optimization for octocopter design and developmentIET Conference Proceedings, 2023
- Feasibility study of topology optimization of the control system frame for the missile with canard configurationAircraft Engineering and Aerospace Technology, 2023
- Quadcopter topology optimization based on impact analysisAIP Conference Proceedings, 2023
- Optimization of quadcopter frame using generative design and comparison with DJI F450 drone frameIOP Conference Series: Materials Science and Engineering, 2021
- A review of topology optimization for additive manufacturing: Status and challengesChinese Journal of Aeronautics, 2021
- Validation of flight dynamic stability optimization constraints with flight testsAerospace Science and Technology, 2020
- Unmanned Aerial Vehicle Impacts on Heat-Strengthened GlassIEEE Access, 2019
- Preliminary design of 3D printed fittings for UAVAircraft Engineering and Aerospace Technology, 2019
- Preliminary studies for alternative lattice core design for FDM 3D Printed Sandwich PanelsMaterials Today: Proceedings, 2018
- The Public Acceptance Challenge and Its Implications for the Developing Civil Drone Industry2016