Prediction of Horizontal Gas–Liquid Segregated Flow Regimes with an All Flow Regime Multifluid Model
Open Access
Abstract
The generalized multifluid modelling approach (GEMMA) has been developed to handle the multiplicity of flow regimes and the coexistence of interfaces of largely different scales in multiphase flows. The solver, based on the OpenFOAM reactingEulerFoam family of solvers, adds interface resolving-like capabilities to the multifluid solver in the cells occupied by large interfaces. In this paper, GEMMA is further developed to predict stratified and slug flow regimes in horizontal ducts. The suppression of the turbulence and the wall-like behaviour of large interfaces is modelled with an additional dissipation source. This enables an accurate prediction of the velocity and of the turbulence kinetic energy in a stratified channel flow and the capturing of the formation and the travel of liquid slugs in an annulus. Large interfaces are identified and tracked, not only in the smooth and wavy stratified regimes but also in the much more perturbed interfaces of liquid slugs. The present work confirms GEMMA to be a reliable approach to provide all flow regime modelling capabilities. Further development will be focused on large interface momentum-transfer modelling, responsible for the overestimation of the interfacial shear and the limited liquid excursion during slugs, and the extension to interface break-up and the entrainment of bubbles and droplets, to handle the entire range of regimes encountered in horizontal flows.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/S019871/1, 755171, Advanced Fuel Cycle Programme)
- European Commission (EP/S019871/1, 755171, Advanced Fuel Cycle Programme)
- Department for Business, Energy and Industrial Strategy, UK Government (EP/S019871/1, 755171, Advanced Fuel Cycle Programme)
This publication has 34 references indexed in Scilit:
- Hybrid Multiphase CFD Solver for Coupled Dispersed/Segregated Flows in Liquid-Liquid ExtractionInternational Journal of Chemical Engineering, 2013
- A Large Interface Model for two-phase CFDNuclear Engineering and Design, 2013
- Applicability of two-phase CFD to nuclear reactor thermalhydraulics and elaboration of Best Practice GuidelinesNuclear Engineering and Design, 2012
- A multi-field two-fluid concept for transitions between different scales of interfacial structuresInternational Journal of Multiphase Flow, 2012
- Two‐fluid model with interface sharpeningInternational Journal for Numerical Methods in Engineering, 2010
- Experimental investigation and CFD simulation of horizontal stratified two-phase flow phenomenaNuclear Engineering and Design, 2008
- Modelling of dispersed bubble and droplet flow at high phase fractionsChemical Engineering Science, 2004
- Direct numerical simulation of turbulence in a sheared air–water flow with a deformable interfaceJournal of Fluid Mechanics, 2003
- A continuum method for modeling surface tensionJournal of Computational Physics, 1992
- Drag coefficient and relative velocity in bubbly, droplet or particulate flowsAIChE Journal, 1979