Bruce C. Hanson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bruce C. Hanson has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Alex Fells
School of Chemical and Process Engineering, University of Leeds, Leeds LS2 9JT, UK
4 shared publications - Alastair Baker
School of Chemical and Process Engineering, University of Leeds, Leeds LS2 9JT, UK
3 shared publications - Marco Colombo
Department of Mechanical Engineering, University of Sheffield, Sir Frederick Mappin Building, Mappin Street, Sheffield S1 3JD, UK
3 shared publications A. De Santis
2 shared publications- Andrea De Santis
School of Chemical and Process Engineering, University of Leeds, Leeds LS2 9JT, UK
2 shared publications - Chris J. Maher
National Nuclear Laboratory, Central Laboratory, Seascale CA20 1PG, UK
2 shared publications
Latest Publications
- Open Access
- 23 May 2024
- Published by MDPI AG in Separations
- Vol. 11 (6) , 163
Accumulation of Particles in an Annular Centrifugal Contactor Cascade and the Effect upon the Extraction of Nitric Acid
Centrifugal contactors (CCs) are a technology candidate for the development of advanced reprocessing flowsheets. While they offer many advantages, such as process intensification, there are still uncertainties regarding their industrial deployment. The presence of particles in the process streams in particular may present a challenge to both performance and operability. Preliminary studies have been undertaken to evaluate the accumulation of particles in the contactors and the effect upon the extraction behaviour of nitric acid. Aluminium oxide (Al2O3) particles were suspended in the aqueous feed solution during the operation of a three-stage, 40 mm diameter CC cascade. The presence of insoluble solid particles in the aqueous feed, up to 7 g/L, were not observed to affect phase separation and entrainment under the experimental conditions investigated. The particles were centrifuged out of solution and accumulated as a thin cake/bed in the rotors of each stage. This work also illustrates that particles do entrain through the cascade. The predominant effect on the rate of accumulation was particle concentration in the aqueous feed solution, and increasing solids loading was observed to have an impact upon the extraction of nitric acid across the cascade.
- 23 May 2024
- Published by MDPI AG in Separations
- Vol. 11 (6) , 163
Open AccessAccumulation of Particles in an Annular Centrifugal Contactor Cascade and the Effect upon the Extraction of Nitric Acid
Centrifugal contactors (CCs) are a technology candidate for the development of advanced reprocessing flowsheets. While they offer many advantages, such as process intensification, there are still uncertainties regarding their industrial deployment. The presence of particles in the process streams in particular may present a challenge to both performance and operability. Preliminary studies have been undertaken to evaluate the accumulation of particles in the contactors and the effect upon the extraction behaviour of nitric acid. Aluminium oxide (Al2O3) particles were suspended in the aqueous feed solution during the operation of a three-stage, 40 mm diameter CC cascade. The presence of insoluble solid particles in the aqueous feed, up to 7 g/L, were not observed to affect phase separation and entrainment under the experimental conditions investigated. The particles were centrifuged out of solution and accumulated as a thin cake/bed in the rotors of each stage. This work also illustrates that particles do entrain through the cascade. The predominant effect on the rate of accumulation was particle concentration in the aqueous feed solution, and increasing solids loading was observed to have an impact upon the extraction of nitric acid across the cascade.
- Open Access
- 3 November 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (2) , 426-438
A self-optimised approach to synthesising DEHiBA for advanced nuclear reprocessing, exploiting the power of machine-learning
In an effort to advance the development of hydrometallurgical reprocessing of used nuclear fuel across the globe, this work sets out to explore and identify an optimised, cost effective pathway to synthesise the ligand DEHiBA (N,N-di-(2-ethylhexyl)isobutyramide). Currently, very few chemical suppliers stock and distribute this specialist ligand, designed for selective uranium chelation and extraction from nuclear fuel. The current high cost of DEHiBA therefore restricts access to essential large-scale testing of this promising ligand designed to advance nuclear reprocessing. This work utilises an automated flow reactor platform for the efficient optimisation of four synthetic routes to DEHiBA. These optimisations focus on optimising cost, reagent efficiency, yield, and productivity target functions by exploiting the power of machine-learning algorithms for rapid process development. Ultimately, we have identified an efficient and cost-effective solvent-free route to DEHiBA from isobutyric anhydride and di-2-ethylhexylamine for <£100 (current prices) per litre of DEHiBA in reagent costs enabling affordable access to litres of this material for subsequent testing. The exothermic nature of this reaction required a tubular flow reactor to control the reaction and mitigate this safety risk. This enabled the continuous production of crude DEHiBA with the capability to achieve yields >99%, at a purity of 76%, and a process mass intensity of 1.29 g g−1, whilst alternative conditions demonstrated productivities >75 kg L−1 h−1, all whilst maintaining a high level of process control with outlet temperatures not exceeding 35 °C.
- 3 November 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (2) , 426-438
Open AccessA self-optimised approach to synthesising DEHiBA for advanced nuclear reprocessing, exploiting the power of machine-learning
In an effort to advance the development of hydrometallurgical reprocessing of used nuclear fuel across the globe, this work sets out to explore and identify an optimised, cost effective pathway to synthesise the ligand DEHiBA (N,N-di-(2-ethylhexyl)isobutyramide). Currently, very few chemical suppliers stock and distribute this specialist ligand, designed for selective uranium chelation and extraction from nuclear fuel. The current high cost of DEHiBA therefore restricts access to essential large-scale testing of this promising ligand designed to advance nuclear reprocessing. This work utilises an automated flow reactor platform for the efficient optimisation of four synthetic routes to DEHiBA. These optimisations focus on optimising cost, reagent efficiency, yield, and productivity target functions by exploiting the power of machine-learning algorithms for rapid process development. Ultimately, we have identified an efficient and cost-effective solvent-free route to DEHiBA from isobutyric anhydride and di-2-ethylhexylamine for <£100 (current prices) per litre of DEHiBA in reagent costs enabling affordable access to litres of this material for subsequent testing. The exothermic nature of this reaction required a tubular flow reactor to control the reaction and mitigate this safety risk. This enabled the continuous production of crude DEHiBA with the capability to achieve yields >99%, at a purity of 76%, and a process mass intensity of 1.29 g g−1, whilst alternative conditions demonstrated productivities >75 kg L−1 h−1, all whilst maintaining a high level of process control with outlet temperatures not exceeding 35 °C.
- Open Access
- 26 May 2023
- Published by MDPI AG in Separations
- Vol. 10 (6) , 331
Effect of Scale-Up on Residence Time and Uranium Extraction on Annular Centrifugal Contactors (ACCs)
This work reports the effect of scaling up annular centrifugal contactors (ACCs) upon the residence time distribution and the efficiency of extraction of uranium. The experiments were carried out in a multi-scale ACC platform of three ACCs with rotor diameters of 12, 25, and 40 mm. To enable direct comparison across all three scales of ACC, the residence time distributions were acquired by injecting dye into the solvent phase at a constant relative volume related to the ACC liquid holdup. Across all scales and flowrates, there was little difference in residence time distribution (95%, and it improved further in larger rotor diameter ACCs.
- 26 May 2023
- Published by MDPI AG in Separations
- Vol. 10 (6) , 331
Open AccessEffect of Scale-Up on Residence Time and Uranium Extraction on Annular Centrifugal Contactors (ACCs)
This work reports the effect of scaling up annular centrifugal contactors (ACCs) upon the residence time distribution and the efficiency of extraction of uranium. The experiments were carried out in a multi-scale ACC platform of three ACCs with rotor diameters of 12, 25, and 40 mm. To enable direct comparison across all three scales of ACC, the residence time distributions were acquired by injecting dye into the solvent phase at a constant relative volume related to the ACC liquid holdup. Across all scales and flowrates, there was little difference in residence time distribution (95%, and it improved further in larger rotor diameter ACCs.
- Open Access
Predicting Mass Transfer in Liquid–Liquid Extraction Columns
In this work, the GEneralised Multifluid Modelling Approach (GEMMA) is applied to the simulation of liquid–liquid extraction in a Rotating Disc Column (RDC) and a Pulsed Sieve-plate Extraction Column (PSEC). A mass transfer modelling methodology is developed, in which the multiphase flows, droplet size distribution and dispersed phase holdup predicted with computational fluid dynamics are coupled to mass transfer correlations to predict the overall mass transfer. The numerical results for the stage-averaged dispersed phase holdup, Sauter mean droplet diameter and axial solute concentration in the RDC and PSEC agree with experimental observations. The proposed modelling method provides an accurate predictive tool for complex multiphase flows, such as those observed in intensified liquid–liquid extraction, and provides an alternative approach to column design using empirical correlations or pilot plant study.
Open AccessPredicting Mass Transfer in Liquid–Liquid Extraction Columns
In this work, the GEneralised Multifluid Modelling Approach (GEMMA) is applied to the simulation of liquid–liquid extraction in a Rotating Disc Column (RDC) and a Pulsed Sieve-plate Extraction Column (PSEC). A mass transfer modelling methodology is developed, in which the multiphase flows, droplet size distribution and dispersed phase holdup predicted with computational fluid dynamics are coupled to mass transfer correlations to predict the overall mass transfer. The numerical results for the stage-averaged dispersed phase holdup, Sauter mean droplet diameter and axial solute concentration in the RDC and PSEC agree with experimental observations. The proposed modelling method provides an accurate predictive tool for complex multiphase flows, such as those observed in intensified liquid–liquid extraction, and provides an alternative approach to column design using empirical correlations or pilot plant study.
- Open Access
Prediction of Horizontal Gas–Liquid Segregated Flow Regimes with an All Flow Regime Multifluid Model
The generalized multifluid modelling approach (GEMMA) has been developed to handle the multiplicity of flow regimes and the coexistence of interfaces of largely different scales in multiphase flows. The solver, based on the OpenFOAM reactingEulerFoam family of solvers, adds interface resolving-like capabilities to the multifluid solver in the cells occupied by large interfaces. In this paper, GEMMA is further developed to predict stratified and slug flow regimes in horizontal ducts. The suppression of the turbulence and the wall-like behaviour of large interfaces is modelled with an additional dissipation source. This enables an accurate prediction of the velocity and of the turbulence kinetic energy in a stratified channel flow and the capturing of the formation and the travel of liquid slugs in an annulus. Large interfaces are identified and tracked, not only in the smooth and wavy stratified regimes but also in the much more perturbed interfaces of liquid slugs. The present work confirms GEMMA to be a reliable approach to provide all flow regime modelling capabilities. Further development will be focused on large interface momentum-transfer modelling, responsible for the overestimation of the interfacial shear and the limited liquid excursion during slugs, and the extension to interface break-up and the entrainment of bubbles and droplets, to handle the entire range of regimes encountered in horizontal flows.
Open AccessPrediction of Horizontal Gas–Liquid Segregated Flow Regimes with an All Flow Regime Multifluid Model
The generalized multifluid modelling approach (GEMMA) has been developed to handle the multiplicity of flow regimes and the coexistence of interfaces of largely different scales in multiphase flows. The solver, based on the OpenFOAM reactingEulerFoam family of solvers, adds interface resolving-like capabilities to the multifluid solver in the cells occupied by large interfaces. In this paper, GEMMA is further developed to predict stratified and slug flow regimes in horizontal ducts. The suppression of the turbulence and the wall-like behaviour of large interfaces is modelled with an additional dissipation source. This enables an accurate prediction of the velocity and of the turbulence kinetic energy in a stratified channel flow and the capturing of the formation and the travel of liquid slugs in an annulus. Large interfaces are identified and tracked, not only in the smooth and wavy stratified regimes but also in the much more perturbed interfaces of liquid slugs. The present work confirms GEMMA to be a reliable approach to provide all flow regime modelling capabilities. Further development will be focused on large interface momentum-transfer modelling, responsible for the overestimation of the interfacial shear and the limited liquid excursion during slugs, and the extension to interface break-up and the entrainment of bubbles and droplets, to handle the entire range of regimes encountered in horizontal flows.
- Open Access
- 27 April 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 51 (10) , 3964-3999
Process intensification of element extraction using centrifugal contactors in the nuclear fuel cycle
This review focuses on consolidating the sequential selective element extraction performed in the process intensification equipment known as Centrifugal Contactors (CCs), the unpredicted precipitation that arises, and finally solutions for inhibiting in situ solids formation.
- 27 April 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 51 (10) , 3964-3999
Open AccessProcess intensification of element extraction using centrifugal contactors in the nuclear fuel cycle
This review focuses on consolidating the sequential selective element extraction performed in the process intensification equipment known as Centrifugal Contactors (CCs), the unpredicted precipitation that arises, and finally solutions for inhibiting in situ solids formation.
- 1 October 2021
- Published by Elsevier in Chemical Engineering Science
- Vol. 242
Hydrodynamics of annular centrifugal contactors: A CFD analysis using a novel multiphase flow modelling approach
- 1 October 2021
- Published by Elsevier in Chemical Engineering Science
- Vol. 242
Hydrodynamics of annular centrifugal contactors: A CFD analysis using a novel multiphase flow modelling approach
- 1 July 2021
- Published by Elsevier in Journal of Computational Physics
- Vol. 436
A generalized multiphase modelling approach for multiscale flows
- 1 July 2021
- Published by Elsevier in Journal of Computational Physics
- Vol. 436
A generalized multiphase modelling approach for multiscale flows
- Open Access
- 1 November 2018
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 109, 145-158
Vacuum drying of advanced gas reactor fuel
- 1 November 2018
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 109, 145-158
Open AccessVacuum drying of advanced gas reactor fuel
- 14 March 2013
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 91 (4) , 593-594
Editorial
- 14 March 2013
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 91 (4) , 593-594
Editorial