The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y2O3 ODS Nanocomposite
Open Access
- 17 December 2022
- Vol. 15 (24) , 9034
Abstract
Mechanical alloying (MA) of powders represents the first processing step in the production of oxide dispersion-strengthened (ODS) alloys. MA is a time and energy-consuming process also in the production of Fe-10Al-4Cr-4Y2O3 creep and oxidation-resistant ODS nanocomposite, denoted as the FeAlOY, and it deserves to be optimized. MA is performed at two different temperatures at different times. The powder after MA, as well as the microstructure and high-temperature strength of the final FeAlOY, are characterized and the optimal MA conditions are evaluated. The obtained results show that the size distribution of the powder particles, as well as the dissolution and homogenization of the Y2O3, becomes saturated quite soon, while the homogenization of the metallic components, such as Al and Cr, takes significantly more time. The high-temperature tensile tests and grain microstructures of the secondary recrystallized FeAlOY, however, indicate that the homogenization of the metallic components during MA does not influence the quality of the FeAlOY, as the matrix of the FeAlOY is sufficiently homogenized during recrystallization. Thus, the conditions of MA correspond to sufficient dissolution and homogenization of Y2O3 and can be considered the optimal ones.Keywords
Funding Information
- Grantová Agentura České Republiky (21-02203X)
This publication has 44 references indexed in Scilit:
- High-temperature mechanical properties and microstructure of 9Cr oxide dispersion strengthened steel compared with RAFMsFusion Engineering and Design, 2011
- Microstructure and mechanical properties of an ODS RAF steel fabricated by hot extrusion or hot isostatic pressingFusion Engineering and Design, 2011
- Nanoscale characterization and formation mechanism of nanoclusters in an ODS steel elaborated by reactive-inspired ball-milling and annealingJournal of Nuclear Materials, 2011
- Temperature dependence of the strength of fine- and ultrafine-grained materialsActa Materialia, 2011
- Ultrafine-grained nanocluster-strengthened alloys with unusually high creep strengthScripta Materialia, 2009
- Creep response and deformation processes in nanocluster-strengthened ferritic steelsActa Materialia, 2008
- Vacancy Mechanism of High Oxygen Solubility and Nucleation of Stable Oxygen-Enriched Clusters in FePhysical Review Letters, 2007
- Microstructure and mechanical properties of two ODS ferritic/martensitic steelsJournal of Nuclear Materials, 2002
- Dislocation dynamics in the oxide dispersion strengthened alloy INCOLOY MA956Materials Science and Engineering: A, 1999
- Straight dislocation-sphericle inclusion interactions: High and low temperature solutionsScripta Metallurgica, 1984