Analytical Modeling of Microwave Transmission Through Metasurfaces Made of Perforated Metal Plates, Arrays of Metal Patches, and Wire Grids
- 26 June 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 66 (5) , 1470-1477
Abstract
The availability of accurate analytical models for the prediction of microwave transmission through subwavelength metasurfaces is of particular interest in the design phase for performance optimization. To this purpose, this article proposes new analytical expressions of the effective admittance of both the inductive and capacitive screens. The effective capacitance of a periodic array of metal patches on a dielectric layer is obtained as a function of the effective inductance of the complementary surface made of a period array of square apertures on a metal plate. The effective inductance of a wire grid is given from the one of the equivalent mesh strip grid, performing the same transmission and reflection characteristics. The proposed formulations are applied to the prediction of the microwave transmission performances of the considered screen configurations. The obtained results are validated by comparison with the ones given by a full-wave numerical code and with data reported in the literature.Keywords
This publication has 24 references indexed in Scilit:
- Dual-band high impedance surface with graphene-based metasurfacesPhysics Letters A, 2020
- Microwave shielding enhancement of high-transparency, double-layer, submillimeter-period metallic meshApplied Physics Letters, 2014
- Shielding Effectiveness of Protective Metallic Wire Meshes: EM Modeling and ValidationIEEE Transactions on Electromagnetic Compatibility, 2014
- Transmission through stacked 2D periodic distributions of square conducting patchesJournal of Applied Physics, 2012
- Analysis and Design of Ultra Thin Electromagnetic Absorbers Comprising Resistively Loaded High Impedance SurfacesIEEE Transactions on Antennas and Propagation, 2010
- A Thin Electromagnetic Absorber for Wide Incidence Angles and Both PolarizationsIEEE Transactions on Antennas and Propagation, 2009
- Simple and Accurate Analytical Model of Planar Grids and High-Impedance Surfaces Comprising Metal Strips or PatchesIEEE Transactions on Antennas and Propagation, 2008
- Equivalent Strip Width for Cylindrical Wire for Mesh Reflector Antennas: Experiments, Waveguide, and Plane-Wave SimulationsIEEE Transactions on Antennas and Propagation, 2006
- Tailoring the AMC and EBG Characteristics of Periodic Metallic Arrays Printed on Grounded Dielectric SubstrateIEEE Transactions on Antennas and Propagation, 2006
- Transmission and reflection characteristics of slightly irregular wire-grids with finite conductivity for arbitrary angles of incidence and grid rotationIEEE Transactions on Antennas and Propagation, 2005