Marcello D'AMore
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marcello D'AMore has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Maria Sabrina Sarto
Department of Astronautical, Electrical and Energy Engineering, Sapienza University of Rome, Rome, Italy
11 shared publications - Alessandro Giuseppe D'ALoia
Sapienza University of Rome
6 shared publications A. G. D'ALoia
Department of Astronautical, Electrical and Energy Engineering, Sapienza University of Rome, Roma, Italy
1 shared publicationA. Tamburrano
1 shared publication- Alessio Tamburrano
Sapienza University of Rome
1 shared publication D. Paladino
Dept. of Electr. Eng., Rome Univ., Italy
1 shared publication
Latest Publications
- 26 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 66 (5) , 1470-1477
Analytical Modeling of Microwave Transmission Through Metasurfaces Made of Perforated Metal Plates, Arrays of Metal Patches, and Wire Grids
The availability of accurate analytical models for the prediction of microwave transmission through subwavelength metasurfaces is of particular interest in the design phase for performance optimization. To this purpose, this article proposes new analytical expressions of the effective admittance of both the inductive and capacitive screens. The effective capacitance of a periodic array of metal patches on a dielectric layer is obtained as a function of the effective inductance of the complementary surface made of a period array of square apertures on a metal plate. The effective inductance of a wire grid is given from the one of the equivalent mesh strip grid, performing the same transmission and reflection characteristics. The proposed formulations are applied to the prediction of the microwave transmission performances of the considered screen configurations. The obtained results are validated by comparison with the ones given by a full-wave numerical code and with data reported in the literature.
- 26 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 66 (5) , 1470-1477
Analytical Modeling of Microwave Transmission Through Metasurfaces Made of Perforated Metal Plates, Arrays of Metal Patches, and Wire Grids
The availability of accurate analytical models for the prediction of microwave transmission through subwavelength metasurfaces is of particular interest in the design phase for performance optimization. To this purpose, this article proposes new analytical expressions of the effective admittance of both the inductive and capacitive screens. The effective capacitance of a periodic array of metal patches on a dielectric layer is obtained as a function of the effective inductance of the complementary surface made of a period array of square apertures on a metal plate. The effective inductance of a wire grid is given from the one of the equivalent mesh strip grid, performing the same transmission and reflection characteristics. The proposed formulations are applied to the prediction of the microwave transmission performances of the considered screen configurations. The obtained results are validated by comparison with the ones given by a full-wave numerical code and with data reported in the literature.
- Open Access
- 24 January 2023
- Published by MDPI AG in Electronics
- Vol. 12 (3) , 588
Optimal Thickness of Double-Layer Graphene-Polymer Absorber for 5G High-Frequency Bands
A new analytical approach to optimize the thicknesses of a two-layer absorbing structure constituted by a graphene-based composite and a polymer dielectric spacer backed by a metallic layer acting as perfect electric conductor (PEC) is proposed. The lossy sheet is made by an epoxy-based vinyl ester resin filled with graphene nanoplatelets (GNPs) characterized by known frequency spectra of the complex permittivity. The optimal thicknesses are computed at the target frequencies of 26, 28, and 39 GHz in order to obtain a –10 dB bandwidth able to cover the 5G frequency bands between 23.8 and 40 GHz. The resulting absorbing structures, having a total thickness lower than 1 mm, are excited by transverse magnetic (TM) or electric (TE) polarized plane waves and the absorption performances are computed in the 5G high frequency range.
- 24 January 2023
- Published by MDPI AG in Electronics
- Vol. 12 (3) , 588
Open AccessOptimal Thickness of Double-Layer Graphene-Polymer Absorber for 5G High-Frequency Bands
A new analytical approach to optimize the thicknesses of a two-layer absorbing structure constituted by a graphene-based composite and a polymer dielectric spacer backed by a metallic layer acting as perfect electric conductor (PEC) is proposed. The lossy sheet is made by an epoxy-based vinyl ester resin filled with graphene nanoplatelets (GNPs) characterized by known frequency spectra of the complex permittivity. The optimal thicknesses are computed at the target frequencies of 26, 28, and 39 GHz in order to obtain a –10 dB bandwidth able to cover the 5G frequency bands between 23.8 and 40 GHz. The resulting absorbing structures, having a total thickness lower than 1 mm, are excited by transverse magnetic (TM) or electric (TE) polarized plane waves and the absorption performances are computed in the 5G high frequency range.
- 8 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (5) , 1-7
Oblique Incidence Optimal Design of Microwave Dielectric-Magnetic Absorbing Composites
The impedance matching equation of a single layer dielectric-magnetic absorber excited by an oblique incidence plane wave is resolved with an expression providing the optimal thickness and highlighting the composite crucial parameters. The effective propagation constant of the nonuniform refracted plane wave into the absorber is represented by a new formulation as a function of the true refraction angle which is a real number unlike the complex quantity resulting from the Snell’s law, usually applied in the literature. The proposed design process is applied to compute microwave absorption performances of different dielectric-magnetic materials, considering both normal and oblique incidence. Furthermore, the incidence angle effect is investigated.
- 8 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (5) , 1-7
Oblique Incidence Optimal Design of Microwave Dielectric-Magnetic Absorbing Composites
The impedance matching equation of a single layer dielectric-magnetic absorber excited by an oblique incidence plane wave is resolved with an expression providing the optimal thickness and highlighting the composite crucial parameters. The effective propagation constant of the nonuniform refracted plane wave into the absorber is represented by a new formulation as a function of the true refraction angle which is a real number unlike the complex quantity resulting from the Snell’s law, usually applied in the literature. The proposed design process is applied to compute microwave absorption performances of different dielectric-magnetic materials, considering both normal and oblique incidence. Furthermore, the incidence angle effect is investigated.
- 29 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 63 (4) , 1015-1024
Closed-Form Analytical Design of Optically Transparent Wideband Absorbers for 5G Technology
The design of new transparent absorbers for the upcoming fifth-generation (5G) technology is investigated. The absorbers consist of a matching layer, a lossy sheet, a spacer, and a back conducting layer (BCL). Both the matching layer and the spacer are one-quarter-wavelength thick and made of polyethylene terephthalate (PET). The lossy sheet and the BCL consist of indium tin oxide (ITO) thin films or graphene-PET laminates in order to avoid the use of any metal and to guarantee the optical transmittance. An innovative closed-form formulation is developed with the aim of evaluating the optimal values of sheet resistances of the lossy layers through analytical expressions. The absorption performances are investigated considering impinging plane waves with an incidence angle between 0° and 30°. The computed absorption coefficients in transverse magnetic (TM) or transverse electric (TE) modes are greater than 0.8, and the transmission coefficient is lower than 0.1 in the 5G frequency range from 25 up to 47 GHz, assuming that the matching layer and the spacer are 1.3 mm thick. The optical transmittance of the absorbers is evaluated in the wavelength range from 400 up to 700 nm by means of an accurate matrix simulation model, considering both optical polarizations, S (i.e., TE) and P (i.e., TM) for different incidence angles. The computed average optical transmittances of the designed absorbers are greater than 80% at 550 nm, i.e., at the wavelength corresponding to the maximum eye sensitivity.
- 29 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 63 (4) , 1015-1024
Closed-Form Analytical Design of Optically Transparent Wideband Absorbers for 5G Technology
The design of new transparent absorbers for the upcoming fifth-generation (5G) technology is investigated. The absorbers consist of a matching layer, a lossy sheet, a spacer, and a back conducting layer (BCL). Both the matching layer and the spacer are one-quarter-wavelength thick and made of polyethylene terephthalate (PET). The lossy sheet and the BCL consist of indium tin oxide (ITO) thin films or graphene-PET laminates in order to avoid the use of any metal and to guarantee the optical transmittance. An innovative closed-form formulation is developed with the aim of evaluating the optimal values of sheet resistances of the lossy layers through analytical expressions. The absorption performances are investigated considering impinging plane waves with an incidence angle between 0° and 30°. The computed absorption coefficients in transverse magnetic (TM) or transverse electric (TE) modes are greater than 0.8, and the transmission coefficient is lower than 0.1 in the 5G frequency range from 25 up to 47 GHz, assuming that the matching layer and the spacer are 1.3 mm thick. The optical transmittance of the absorbers is evaluated in the wavelength range from 400 up to 700 nm by means of an accurate matrix simulation model, considering both optical polarizations, S (i.e., TE) and P (i.e., TM) for different incidence angles. The computed average optical transmittances of the designed absorbers are greater than 80% at 550 nm, i.e., at the wavelength corresponding to the maximum eye sensitivity.
- Open Access
- 28 April 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (5) , 843
Low-Terahertz Transparent Graphene-Based Absorber
A new, transparent, metal-free absorber, based on the use of multilayer graphene/dielectric laminates (GLs), is proposed for applications in the low-terahertz frequency range. The designed absorber has a total thickness of around 70 µm and consists of a front matching dielectric layer followed by a GL, a dielectric spacer and a back GL. The laminates are periodic structures constituted of graphene sheets separated by 50-nm-thick polyethylene terephthalate (PET) interlayers, while the matching layer and the spacer are one-quarter-wavelength thick and made of PET. The GLs are modeled as homogeneous-equivalent single layers (ESLs) characterized by their sheet resistances Rs. An innovative analytical method is proposed in order to select Rs values optimizing the electromagnetic wave absorption either in low-gigahertz or low-terahertz frequency range. The frequency spectra of the absorption, reflection and transmission coefficients are computed in the range up to 4 THz by using different values of Rs. Then, realistic Rs values of chemically doped graphene monolayers over PET substrates are considered. The designed absorbers are characterized by an absorption coefficient with a peak value of about 0.8 at the first resonant frequency of 1.1 THz, and a 1.4 THz bandwidth centered at 1.5 THz with reflection coefficient below - 10 dB. Moreover, the optical transmittance of the proposed absorbers are computed by means of the optical matrix theory and it is found to be greater than 86% in all the visible ranges.
- 28 April 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (5) , 843
Open AccessLow-Terahertz Transparent Graphene-Based Absorber
A new, transparent, metal-free absorber, based on the use of multilayer graphene/dielectric laminates (GLs), is proposed for applications in the low-terahertz frequency range. The designed absorber has a total thickness of around 70 µm and consists of a front matching dielectric layer followed by a GL, a dielectric spacer and a back GL. The laminates are periodic structures constituted of graphene sheets separated by 50-nm-thick polyethylene terephthalate (PET) interlayers, while the matching layer and the spacer are one-quarter-wavelength thick and made of PET. The GLs are modeled as homogeneous-equivalent single layers (ESLs) characterized by their sheet resistances Rs. An innovative analytical method is proposed in order to select Rs values optimizing the electromagnetic wave absorption either in low-gigahertz or low-terahertz frequency range. The frequency spectra of the absorption, reflection and transmission coefficients are computed in the range up to 4 THz by using different values of Rs. Then, realistic Rs values of chemically doped graphene monolayers over PET substrates are considered. The designed absorbers are characterized by an absorption coefficient with a peak value of about 0.8 at the first resonant frequency of 1.1 THz, and a 1.4 THz bandwidth centered at 1.5 THz with reflection coefficient below - 10 dB. Moreover, the optical transmittance of the proposed absorbers are computed by means of the optical matrix theory and it is found to be greater than 86% in all the visible ranges.
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 61 (6) , 1803-1810
Effective Medium Model of Periodic Nanolayered Transparent Shields
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 61 (6) , 1803-1810
Effective Medium Model of Periodic Nanolayered Transparent Shields
- 17 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 60 (4) , 849-857
Low-Terahertz Modeling of Graphene/Dielectric Multilayers Using an Equivalent Single Layer in Reverberation Environment
Low-terahertz field transmission through a graphene/dielectric laminate (GDL) is investigated by modeling each graphene/dielectric bilayer (GDB) as a homogeneous uniaxial anisotropic medium. The effective medium approximation is applied to define the transverse effective complex conductivity of the GDB, which is expressed as a function of the thickness and permittivity of the dielectric layer, and of the graphene sheet conductivity. The graphene/dielectric multilayered structure is modeled as an equivalent single layer (ESL), having the total thickness of the multilayer and characterized by the effective complex conductivity of the GDB. The model is applied to simulate two different sets of chemically doped graphene samples, characterized by measured values of the dc sheet resistance. The transmissivity, reflectivity, and shielding effectiveness of the resulting GDLs are computed in a reverberation environment up to 10 THz by applying the transfer matrix method to both the GDL and to the ESL. The comparison of the obtained results proves the high accuracy of the homogenization-based ESL model.
- 17 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 60 (4) , 849-857
Low-Terahertz Modeling of Graphene/Dielectric Multilayers Using an Equivalent Single Layer in Reverberation Environment
Low-terahertz field transmission through a graphene/dielectric laminate (GDL) is investigated by modeling each graphene/dielectric bilayer (GDB) as a homogeneous uniaxial anisotropic medium. The effective medium approximation is applied to define the transverse effective complex conductivity of the GDB, which is expressed as a function of the thickness and permittivity of the dielectric layer, and of the graphene sheet conductivity. The graphene/dielectric multilayered structure is modeled as an equivalent single layer (ESL), having the total thickness of the multilayer and characterized by the effective complex conductivity of the GDB. The model is applied to simulate two different sets of chemically doped graphene samples, characterized by measured values of the dc sheet resistance. The transmissivity, reflectivity, and shielding effectiveness of the resulting GDLs are computed in a reverberation environment up to 10 THz by applying the transfer matrix method to both the GDL and to the ESL. The comparison of the obtained results proves the high accuracy of the homogenization-based ESL model.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 419-424
Bit-Transport Capability of Broadband Multicarrier Power Line Channels Constrained by Radiated Emission
A procedure is proposed to test the bit-transport capability of the multi-carrier scheme on distribution power networks in the frequency range of 1-30 MHz. A frequency-dependent rigorous model of medium-voltage power networks made of branches of three-phase lines above a dissipative ground is utilized. The radiated electromagnetic field is predicted by means of a full wave procedure in the high frequency range taking into account the ground propagation. The integer-bit loading procedure presents as a target the optimal bit-allocation in the sub-channels having the same bandwidth and the maximization of the total bit-rate. The constraints imposed by the source are the power level and the radiated electromagnetic field. Networking aspects are considered both for the effect of crosstalk induced by the presence of multiple users/stations and for policies accounting for the QoS requests coming from the users. Different policies are investigated by considering both fairness requirements, that reduce the network net rate, and unfair approach able to maximize the network rate without considering "all" the QoS requirements. The procedure is applied for the optimal bits allocation on the sub-channels of a medium voltage power network with a tree-type configuration made by five branches.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 419-424
Bit-Transport Capability of Broadband Multicarrier Power Line Channels Constrained by Radiated Emission
A procedure is proposed to test the bit-transport capability of the multi-carrier scheme on distribution power networks in the frequency range of 1-30 MHz. A frequency-dependent rigorous model of medium-voltage power networks made of branches of three-phase lines above a dissipative ground is utilized. The radiated electromagnetic field is predicted by means of a full wave procedure in the high frequency range taking into account the ground propagation. The integer-bit loading procedure presents as a target the optimal bit-allocation in the sub-channels having the same bandwidth and the maximization of the total bit-rate. The constraints imposed by the source are the power level and the radiated electromagnetic field. Networking aspects are considered both for the effect of crosstalk induced by the presence of multiple users/stations and for policies accounting for the QoS requests coming from the users. Different policies are investigated by considering both fairness requirements, that reduce the network net rate, and unfair approach able to maximize the network rate without considering "all" the QoS requirements. The procedure is applied for the optimal bits allocation on the sub-channels of a medium voltage power network with a tree-type configuration made by five branches.
- 4 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
New double-shielded power cables generating low magnetic field levels
The design criteria of new medium voltage cables of a three-phase power line generating very low magnetic field levels are described. The double-shielded cables have the inner screen made of copper and the outer one realized by alloy-49 or steel-1010. The currents induced in the copper shields generate a magnetic field opposite to the one produced by the currents flowing in the inner conductors, thus reducing strongly the external magnetic field. The ferromagnetic shield has the function of confining the magnetic induction flux in order to increase the intensity of the circulating currents in the copper screens. The sizing of the cross-section of the copper screen, which is the crucial aspect of the project, is obtained by means of the thermal analysis of the cables and the computation of the generated magnetic field level. Moreover, the simulation of the three-phase line for the prediction of the power losses is carried out. Prototypes of the new cables are realized and the measurement of the 50 Hz magnetic field generated by the three-phase test line, 25 m long, is carried out in the laboratory. The very low levels of the measured magnetic induction prove the good performances of the new cables.
- 4 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
New double-shielded power cables generating low magnetic field levels
The design criteria of new medium voltage cables of a three-phase power line generating very low magnetic field levels are described. The double-shielded cables have the inner screen made of copper and the outer one realized by alloy-49 or steel-1010. The currents induced in the copper shields generate a magnetic field opposite to the one produced by the currents flowing in the inner conductors, thus reducing strongly the external magnetic field. The ferromagnetic shield has the function of confining the magnetic induction flux in order to increase the intensity of the circulating currents in the copper screens. The sizing of the cross-section of the copper screen, which is the crucial aspect of the project, is obtained by means of the thermal analysis of the cables and the computation of the generated magnetic field level. Moreover, the simulation of the three-phase line for the prediction of the power losses is carried out. Prototypes of the new cables are realized and the measurement of the 50 Hz magnetic field generated by the three-phase test line, 25 m long, is carried out in the laboratory. The very low levels of the measured magnetic induction prove the good performances of the new cables.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 242-245
Sensitivity Analysis of Wave Propagation in a Single-Walled Carbon Nanotube
Literal expressions of the parameters characterizing the common mode wave propagation in a single-walled carbon nanotube are presented. The sensitivity functions of the line parameters with respect to the frequency and the distributed line constants are represented in analytical form. The “electrically short” nano transmission line is described by a very simple simulation model. Frequency spectra of the line parameters and their sensitivity functions are shown in the range up to 10 GHz.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 242-245
Sensitivity Analysis of Wave Propagation in a Single-Walled Carbon Nanotube
Literal expressions of the parameters characterizing the common mode wave propagation in a single-walled carbon nanotube are presented. The sensitivity functions of the line parameters with respect to the frequency and the distributed line constants are represented in analytical form. The “electrically short” nano transmission line is described by a very simple simulation model. Frequency spectra of the line parameters and their sensitivity functions are shown in the range up to 10 GHz.