Direct‐Printed Textile Circuits for Smart Gloves With Enhanced Integration
Open Access
- 14 October 2026
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (22) , e71290
Abstract
Integrating deformable sensors, conductive routing, embedded electronics, and local data processing on a textile carrier remains challenging for wearable gesture interfaces. Here, a direct‐printed textile circuit smart glove was constructed using a hybrid textile–electronic architecture. Low‐resistance carbon paste and Ag paste were sequentially screen‐printed to form the strain‐sensitive layer, electrodes, interconnects, and component pads. Packaged modules were attached with silver‐filled epoxy electrically conductive adhesive and protected by localized silicone‐rubber encapsulation. The sensor produced a linear response over 2.5%–15% strain ( R 2 = 0.9995), with response and recovery times of approximately 200 and 100 ms, and stable electrical output during a 10 000s test corresponding to about 4000 cycles at 0.4 Hz. An ESP32‐based threshold classifier processed five finger channels locally and recognized eight static gestures with an average accuracy of 95.2% over 480 trials. The encoded gestures were then used to command a uHand 2.0 bionic hand and an agricultural robot. These results demonstrate the system‐level feasibility of the hybrid textile–electronic architecture for integrating textile sensing, on‐device gesture recognition, wireless communication, and robotic command execution.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFD2000300)
This publication has 20 references indexed in Scilit:
- Hierarchical conducting networks constructed as resistive strain sensors for personal healthcare monitoring and robotic arm controlChemical Engineering Journal, 2024
- Smart Glove With Fully Integrated Textile Sensors and Wireless Sensor Frontend for the Tactile InternetIEEE Sensors Letters, 2023
- Soft Modular Glove with Multimodal Sensing and Augmented Haptic Feedback Enabled by Materials’ MultifunctionalitiesACS Nano, 2022
- Wearable inertial sensors for objective kinematic assessments: A brief overviewJournal of Occupational and Environmental Hygiene, 2022
- Bio-inspired, super-stretchable and self-adhesive hybrid hydrogel with SC-PDA/GO-Ca2+/PAM framework for high precision wearable sensorsChemical Engineering Journal, 2022
- Electronic Textiles for Wearable Point-of-Care SystemsChemical Reviews, 2021
- A Review of the Hand Gesture Recognition System: Current Progress and Future DirectionsIEEE Access, 2021
- Eye tracking algorithms, techniques, tools, and applications with an emphasis on machine learning and Internet of Things technologiesExpert Systems with Applications, 2021
- Design of a game control system based on Brain-computer interface: link to a game2021
- Hand Gesture User Interface for Smart Devices Based on Mems SensorsProcedia Computer Science, 2016