Zhen Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhen Li has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
Zhongxiang Zhu
7 shared publicationsEiji Inoue
4 shared publications- Enrong Mao
College of Engineering, China Agricultural University, Beijing 100083, China
4 shared publications Muneshi Mitsuoka
4 shared publications- Yuefeng Du
College of Engineering, China Agricultural University, Beijing 100083, China
4 shared publications - Zhi-Zhu He
China Agricultural University
4 shared publications
Latest Publications
- Open Access
- 14 October 2026
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (22) , e71290
Direct‐Printed Textile Circuits for Smart Gloves With Enhanced Integration
Integrating deformable sensors, conductive routing, embedded electronics, and local data processing on a textile carrier remains challenging for wearable gesture interfaces. Here, a direct‐printed textile circuit smart glove was constructed using a hybrid textile–electronic architecture. Low‐resistance carbon paste and Ag paste were sequentially screen‐printed to form the strain‐sensitive layer, electrodes, interconnects, and component pads. Packaged modules were attached with silver‐filled epoxy electrically conductive adhesive and protected by localized silicone‐rubber encapsulation. The sensor produced a linear response over 2.5%–15% strain ( R 2 = 0.9995), with response and recovery times of approximately 200 and 100 ms, and stable electrical output during a 10 000s test corresponding to about 4000 cycles at 0.4 Hz. An ESP32‐based threshold classifier processed five finger channels locally and recognized eight static gestures with an average accuracy of 95.2% over 480 trials. The encoded gestures were then used to command a uHand 2.0 bionic hand and an agricultural robot. These results demonstrate the system‐level feasibility of the hybrid textile–electronic architecture for integrating textile sensing, on‐device gesture recognition, wireless communication, and robotic command execution.
- 14 October 2026
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (22) , e71290
Open AccessDirect‐Printed Textile Circuits for Smart Gloves With Enhanced Integration
Integrating deformable sensors, conductive routing, embedded electronics, and local data processing on a textile carrier remains challenging for wearable gesture interfaces. Here, a direct‐printed textile circuit smart glove was constructed using a hybrid textile–electronic architecture. Low‐resistance carbon paste and Ag paste were sequentially screen‐printed to form the strain‐sensitive layer, electrodes, interconnects, and component pads. Packaged modules were attached with silver‐filled epoxy electrically conductive adhesive and protected by localized silicone‐rubber encapsulation. The sensor produced a linear response over 2.5%–15% strain ( R 2 = 0.9995), with response and recovery times of approximately 200 and 100 ms, and stable electrical output during a 10 000s test corresponding to about 4000 cycles at 0.4 Hz. An ESP32‐based threshold classifier processed five finger channels locally and recognized eight static gestures with an average accuracy of 95.2% over 480 trials. The encoded gestures were then used to command a uHand 2.0 bionic hand and an agricultural robot. These results demonstrate the system‐level feasibility of the hybrid textile–electronic architecture for integrating textile sensing, on‐device gesture recognition, wireless communication, and robotic command execution.
- 27 March 2026
- Published by Elsevier in Biosystems Engineering
- Vol. 266
Mitigating sideslip-induced undesired tractor yawing with a control moment gyroscope
- 27 March 2026
- Published by Elsevier in Biosystems Engineering
- Vol. 266
Mitigating sideslip-induced undesired tractor yawing with a control moment gyroscope
- Open Access
Stabilizing Agricultural Robots Against Intense Rollovers With Control Moment Gyro
Rollover accidents involving agricultural wheeled robots, accompanied by severe mechanical impacts, pose serious threats to operational safety and reduce functional efficiency. To address this issue, an active rollover prevention strategy is proposed, utilizing a single‐gimbal control moment gyro (SGCMG), to stabilize typical agricultural robots and prevent potential rollovers. To match the free oscillation of the pivot front axle, a novel recovery torque model of the coupled robot‐SGCMG system is established, in which two patterns are introduced to refine the rollover process with uncertain parameters. Additionally, a lateral stability index is adopted and analyzed to assess the hazard level of potential rollovers. Aimed at handling uncertain parameters and hazard levels, an adaptive backstepping control strategy is developed for real‐time anti‐rollover implementation. Within this strategy, control gains are adaptively tuned based on theoretical derivations, thereby suppressing rollover tendency while minimizing tuning effort. For verification, a scaled experimental platform, designed according to similarity theory, is constructed to ensure safety of personnel and equipment. Experimental results show that the proposed method can precisely regulate the output torque of the gyro, rapidly and effectively mitigating the risk of imminent rollover. This method provides a promising solution for wheeled robot stability and a theoretical basis for advanced safety control in agricultural robotics.
Open AccessStabilizing Agricultural Robots Against Intense Rollovers With Control Moment Gyro
Rollover accidents involving agricultural wheeled robots, accompanied by severe mechanical impacts, pose serious threats to operational safety and reduce functional efficiency. To address this issue, an active rollover prevention strategy is proposed, utilizing a single‐gimbal control moment gyro (SGCMG), to stabilize typical agricultural robots and prevent potential rollovers. To match the free oscillation of the pivot front axle, a novel recovery torque model of the coupled robot‐SGCMG system is established, in which two patterns are introduced to refine the rollover process with uncertain parameters. Additionally, a lateral stability index is adopted and analyzed to assess the hazard level of potential rollovers. Aimed at handling uncertain parameters and hazard levels, an adaptive backstepping control strategy is developed for real‐time anti‐rollover implementation. Within this strategy, control gains are adaptively tuned based on theoretical derivations, thereby suppressing rollover tendency while minimizing tuning effort. For verification, a scaled experimental platform, designed according to similarity theory, is constructed to ensure safety of personnel and equipment. Experimental results show that the proposed method can precisely regulate the output torque of the gyro, rapidly and effectively mitigating the risk of imminent rollover. This method provides a promising solution for wheeled robot stability and a theoretical basis for advanced safety control in agricultural robotics.
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (19) , 249-262
Design of Axial Flux Double PCB Stator Permanent Magnet Motor
- 1 January 2025
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 61 (19) , 249-262
Design of Axial Flux Double PCB Stator Permanent Magnet Motor
- Open Access
- 1 November 2024
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Technologica
- Vol. 54 (11) , 2071-2094
Advances in tire material-structural innovation and information perception technology
轮胎作为地面车辆驱动系统的末端执行元件,对整车诸多性能起着至关重要的作用. 近年来,由于传统轮胎在多参量信息感知、可靠性预测及环境适应性等方面的发展瓶颈明显,以轮胎材料优化、结构创新及信息感知为手段的解决方案应运而生. 其中轮胎材料及结构创新为解决轮胎固有问题提供新思路;智能轮胎信息感知技术则使其作为敏感元件感受自身状态和道路信息,并与智能驾驶和车联网等技术进行深度融合. 本文综述了轮胎材料优化、结构创新与信息感知技术的研究现状,首先回顾了近年来绿色轮胎概念下轮胎材料研究在改进滚阻性、抗湿滑性和耐磨性中作出的突破;其次,展开讨论充气轮胎、免充气轮胎及概念轮胎在结构创新方面的应用与研究;最后重点对智能轮胎发展中的信息感知技术进行总结,讨论各类传感系统的集成方式、感知元件类型及数据解析方法. 在此基础上,结合智能驾驶车辆对轮胎材料、结构和智能化的潜在技术需求及未来发展提出展望与建议.
- 1 November 2024
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Technologica
- Vol. 54 (11) , 2071-2094
Open AccessAdvances in tire material-structural innovation and information perception technology
轮胎作为地面车辆驱动系统的末端执行元件,对整车诸多性能起着至关重要的作用. 近年来,由于传统轮胎在多参量信息感知、可靠性预测及环境适应性等方面的发展瓶颈明显,以轮胎材料优化、结构创新及信息感知为手段的解决方案应运而生. 其中轮胎材料及结构创新为解决轮胎固有问题提供新思路;智能轮胎信息感知技术则使其作为敏感元件感受自身状态和道路信息,并与智能驾驶和车联网等技术进行深度融合. 本文综述了轮胎材料优化、结构创新与信息感知技术的研究现状,首先回顾了近年来绿色轮胎概念下轮胎材料研究在改进滚阻性、抗湿滑性和耐磨性中作出的突破;其次,展开讨论充气轮胎、免充气轮胎及概念轮胎在结构创新方面的应用与研究;最后重点对智能轮胎发展中的信息感知技术进行总结,讨论各类传感系统的集成方式、感知元件类型及数据解析方法. 在此基础上,结合智能驾驶车辆对轮胎材料、结构和智能化的潜在技术需求及未来发展提出展望与建议.
- 30 October 2024
- Published by Springer Nature
- p. 685-715
Liquid Metal Micro/Nano Magnetic Fluid
- 26 September 2024
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 226
Advances in tractor rollover and stability control: Implications for off-road driving safety
- 26 September 2024
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 226
Advances in tractor rollover and stability control: Implications for off-road driving safety
- Open Access
- 23 May 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (6) , 811
Research on a Variable Universe Control Method and the Performance of Large Sprayer Active Suspension Based on an Artificial Fish Swarm Algorithm–Back Propagation Fuzzy Neural Network
In view of the typical requirements of large high-clearance sprayers, such as those operating in poor road conditions for farmland plant protection and at high operation speeds, reducing the vibration of sprayer suspension systems has become a research hotspot. In this study, the hydro-pneumatic suspension (HPS) of large high-clearance sprayers was taken as the object, and a variable universe T-S fuzzy controller with real vehicle vibration data as input was proposed to control suspension motion in real time. Different from traditional semi-active suspension, based on the characteristics of variable universe extension factors, a training method combining the artificial fish swarm algorithm and the back propagation algorithm was used to establish a fuzzy neural network controller with precise input to optimize the variable universe. Then, the time-domain and frequency-domain response characteristics of HPS were analyzed by simulating the special road conditions typical of farmland. Finally, the field performance of the sprayer equipped with the new controller was tested. The results show that the error rate of the AFSA-BP algorithm in training the FNN could be reduced to 3.9%, and compared with a passive suspension system, the T-S fuzzy controller improved the effects of spring mass acceleration, pitch angle acceleration, and roll angle acceleration by 18.3%, 23.3%, and 27.7%, respectively, verifying the effectiveness and engineering practicality of the active controller in this study.
- 23 May 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (6) , 811
Open AccessResearch on a Variable Universe Control Method and the Performance of Large Sprayer Active Suspension Based on an Artificial Fish Swarm Algorithm–Back Propagation Fuzzy Neural Network
In view of the typical requirements of large high-clearance sprayers, such as those operating in poor road conditions for farmland plant protection and at high operation speeds, reducing the vibration of sprayer suspension systems has become a research hotspot. In this study, the hydro-pneumatic suspension (HPS) of large high-clearance sprayers was taken as the object, and a variable universe T-S fuzzy controller with real vehicle vibration data as input was proposed to control suspension motion in real time. Different from traditional semi-active suspension, based on the characteristics of variable universe extension factors, a training method combining the artificial fish swarm algorithm and the back propagation algorithm was used to establish a fuzzy neural network controller with precise input to optimize the variable universe. Then, the time-domain and frequency-domain response characteristics of HPS were analyzed by simulating the special road conditions typical of farmland. Finally, the field performance of the sprayer equipped with the new controller was tested. The results show that the error rate of the AFSA-BP algorithm in training the FNN could be reduced to 3.9%, and compared with a passive suspension system, the T-S fuzzy controller improved the effects of spring mass acceleration, pitch angle acceleration, and roll angle acceleration by 18.3%, 23.3%, and 27.7%, respectively, verifying the effectiveness and engineering practicality of the active controller in this study.
- 13 April 2024
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 220
Algorithm and scale experiment of gyro-based tractor rollover control towards hilly farmland application
- 13 April 2024
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 220
Algorithm and scale experiment of gyro-based tractor rollover control towards hilly farmland application
- Open Access
- 1 January 2024
- Published by International Journal of Agricultural and Biological Engineering (IJABE) in International Journal of Agricultural and Biological Engineering
- Vol. 17 (2) , 109-122
Optimization design of the hydro-pneumatic suspension system for high clearance self-propelled sprayer using improved MOPSO algorithm
Optimization design of the hydro-pneumatic suspension system for highclearance self-propelled sprayer using improved MOPSO algorithm
- 1 January 2024
- Published by International Journal of Agricultural and Biological Engineering (IJABE) in International Journal of Agricultural and Biological Engineering
- Vol. 17 (2) , 109-122
Open AccessOptimization design of the hydro-pneumatic suspension system for high clearance self-propelled sprayer using improved MOPSO algorithm
Optimization design of the hydro-pneumatic suspension system for highclearance self-propelled sprayer using improved MOPSO algorithm