Nonselective, material-independent, precision plasma delayering of metals and dielectrics
- 1 December 2025
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (6)
Abstract
Nonselective, high-precision, plasma-assisted delayering provides a robust means for failure analysis of heterogeneously integrated devices. While chemical mechanical planarization is often used to planarize different materials exposed on the wafer surface, deleterious defects, such as gouging and corrosion, can impact die yield and device performance. To circumvent these issues, in this work, we demonstrate a material-independent, nonselective plasma delayering technique. The etch rate is uniform over the area of interest, requiring only a single dry etching chamber. Ar, CF4, and O2, commonly used in high-volume microchip fabrication, are selected as etchants of W, Ti, and SiO2. These materials are chosen as representative examples of metals and dielectrics found in CMOS devices. We use methyl acetate as an etch retardant to reduce and eventually halt the etching process. The relative methyl acetate mass flow rate provides precise control of the etching of both metals and dielectrics, defining a process window in which all three etch rates begin to converge. Depending on the process need, such as planarizing highly corrugated surface, the uniform etching can also be modified to become more material-dependent and selective to provide precision delayering and achieve a planarized surface.Keywords
Funding Information
- National Nuclear Security Administration (DE-NA0003525)
This publication has 15 references indexed in Scilit:
- Performance assessment of chemical mechanical planarization wastewater treatment in nano-electronics industries using membrane distillationSeparation and Purification Technology, 2020
- Dry etching of copper thin films in high density plasma of CH3COOH/ArThin Solid Films, 2019
- Fluorine-based plasmas: Main features and application in micro-and nanotechnology and in surface treatmentComptes Rendus. Chimie, 2018
- Dry etching properties of TiO2 thin films in O2/CF4/Ar plasmaVacuum, 2013
- Chemical Mechanical Planarization: Slurry Chemistry, Materials, and MechanismsChemical Reviews, 2009
- Ion sputtering rates of W-, Ti- and Cr-carbides studied at different Ar+ ion incidence anglesApplied Surface Science, 2008
- A Hybrid Life Cycle Inventory of Nano-Scale Semiconductor ManufacturingEnvironmental Science & Technology, 2008
- Effect of chamber wall conditions on Cl and Cl2 concentrations in an inductively coupled plasma reactorJournal of Vacuum Science & Technology A, 2002
- Trends in sputteringProgress in Surface Science, 2000
- Negative and positive ions from CF4 and CF4/O2 rf discharges in etching SiApplied Physics Letters, 1993