DFN Model for Flow Simulation in Hydraulically Fractured Wells With Pre-Existing Natural Fractures Using Unstructured Quadrilateral Grids
- 9 November 2015
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Multiphase flow simulation of hydraulically fractured wells with pre-existing natural fractures is a challenging task. Discrete fracture network (DFN) is an effective method to simulate a system of anisotropic fracture network. In DFN method unlike double porosity approach, fractures can be defined in different scales and in different apertures and directions such that all details of fractures will be included in the simulation. Also all the interactions and fluid flow in and between the fractures and within the matrix are modelled in a unified manner, using the same computational grid. We developed software based on DFN model in which both induced fractures and pre-existing natural fractures can be placed at any location and direction in the geological model. Then, quadrilateral unstructured grids are generated using Paving method. Quadrilateral grids are more efficient and more flexible than triangular grids such that the number of quadrilateral grids is reduced to half. A drawback of algorithm in this mesh generation process is that very small grids are generated in the intersection of fractures and in the ends of the fracture grids due to the size difference between the fracture and the matrix. In order to avoid severe time-step restrictions associated with small cells, an endpoint transformation method is used to replace the quadrilateral grids with the triangular grids at both ends of the fracture. As a result, the number of very small grids at the ends of fractures is notably decreased. In this paper, the results of two-phase flow simulation in a hydraulically fractured well with pre-existing natural fractures are presented. For solving the pressure and saturation equations in each grid, the inter region of quadrilateral mesh is taken as a control volume cell and the governing equations are solved using MPFA (Multi-Point Flux Approximation) technique which is designed to give a correct discretization of the flow equations for general non-orthogonal grids. Finally the results of our software are tested to verify its validity in theory, algorithm, and efficiency in calculation.Keywords
This publication has 35 references indexed in Scilit:
- Continuous elliptic and multi-dimensional hyperbolic Darcy-flux finite-volume methodsComputers & Fluids, 2011
- q-Families of CVD(MPFA) Schemes on General Elements: Numerical Convergence and the Maximum PrincipleArchives of Computational Methods in Engineering, 2010
- Upscaled Unstructured Computational Grids for Efficient Simulation of Flow in Fractured Porous MediaTransport in Porous Media, 2009
- Comparison of cell- and vertex-centered discretization methods for flow in a two-dimensional discrete-fracture–matrix systemAdvances in Water Resources, 2009
- A stitching method for the generation of unstructured meshes for use with co-volume solution techniquesComputer Methods in Applied Mechanics and Engineering, 2006
- Discretization on Non-Orthogonal, Quadrilateral Grids for Inhomogeneous, Anisotropic MediaJournal of Computational Physics, 1996
- A fast algorithm for generating constrained delaunay triangulationsComputers & Structures, 1993
- Paving: A new approach to automated quadrilateral mesh generationInternational Journal for Numerical Methods in Engineering, 1991
- Generation of three‐dimensional unstructured grids by the advancing‐front methodInternational Journal for Numerical Methods in Fluids, 1988
- An implementation of Watson's algorithm for computing 2-dimensional delaunay triangulationsAdvances in Engineering Software (1978), 1984