Effect of β‐to‐α Phase Transformation on the Microstructural Development and Mechanical Properties of Fine‐Grained Silicon Carbide Ceramics

Authors:

Abstract
Ultrafine β‐SiC powders mixed with 7 wt% Al2O3, 2 wt% Y2O3, and 1.785 wt% CaCO3 were hot‐pressed and subsequently annealed in either the absence or the presence of applied pressure. Because the β‐SiC to α‐SiC phase transformation is dependent on annealing conditions, the novel processing technique of annealing under pressure can control this phase transformation, and, hence, the microstructures and mechanical properties of fine‐grained liquid‐phase‐sintered SiC ceramics. In comparison to annealing without pressure, the application of pressure during annealing greatly suppressed the phase transformation from β‐SiC to α‐SiC. Materials annealed with pressure exhibited a fine microstructure with equiaxed grains when the phase transformation from β‐SiC to α‐SiC was 30 vol%. These results suggested that the precise control of phase transformation in SiC ceramics and their mechanical properties could be achieved through annealing with or without pressure.

This publication has 28 references indexed in Scilit: