A Control Method for Converter-Interfaced Sources to Improve Operation of Directional Protection Elements
- 30 August 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 38 (1) , 642-654
Abstract
The traditional fault control strategy of converter-interfaced renewable energy sources (CIRESs) may bring about a lower sensitivity level or misoperation of fault component-based directional elements. To overcome this problem, a new control scheme is proposed to adjust sequence impedance angles of CIRESs by computing suitable current references of the CIRES controller. Meanwhile, these current references are maximized by an iterative algorithm to make full use of the short-circuit capacity of CIRESs. The proposed control scheme is applicable to various faulty conditions such as different fault types, power factors, weak grids, and larger fault resistances. Compared with the new directional elements that need to update protection algorithms, the proposed control strategies can make CIRESs compatible with the existing directional elements whilst the necessary fault ride-through (FRT) requirements can still be satisfied. Furthermore, all the controller parameters are not required to be revised based on the detected fault type, even with only local measured data collected. The associated PSCAD simulations, real-time digital simulator (RTDS) testing and the downscale hardware experiment verify the proposed method.Keywords
Funding Information
- China Scholarship Council (202006730007)
This publication has 33 references indexed in Scilit:
- Fault Ride-Through Capability of Voltage-Controlled InvertersIEEE Transactions on Industrial Electronics, 2018
- Evaluation of directional relay algorithms in the presence of FCLIET Science, Measurement & Technology, 2017
- A New Directional Element for Microgrid ProtectionIEEE Transactions on Smart Grid, 2017
- Resilience Enhancement of Microgrids With Inverter-Interfaced DGs by Enabling Faulty Phase SelectionIEEE Transactions on Smart Grid, 2017
- Damping-Based Droop Control Strategy Allowing an Increased Penetration of Renewable Energy Resources in Low-Voltage GridsIEEE Transactions on Power Delivery, 2016
- Fault Type Classification in Microgrids Including Photovoltaic DGsIEEE Transactions on Smart Grid, 2015
- Solution to Close-in Fault Problem in Directional RelayingIEEE Transactions on Power Delivery, 2008
- Input-Admittance Calculation and Shaping for Controlled Voltage-Source ConvertersIEEE Transactions on Industrial Electronics, 2007
- Practical Implementation of Delayed Signal Cancellation Method for Phase-Sequence SeparationIEEE Transactions on Power Delivery, 2006
- Dual current control scheme for PWM converter under unbalanced input voltage conditionsIEEE Transactions on Industrial Electronics, 1999