Contact Behavior of Composite CrTiSiN Coated Dies in Compressing of Mg Alloy Sheets under High Pressure
Open Access
Abstract
Hard coatings have been adopted in cutting and forming applications for nearly two decades. The major purpose of using hard coatings is to reduce the friction coefficient between contact surfaces, to increase strength, toughness and anti-wear performance of working tools and molds, and then to obtain a smooth work surface and an increase in service life of tools and molds. In this report, we deposited a composite CrTiSiN hard coating, and a traditional single-layered TiAlN coating as a reference. Then, the coatings were comparatively studied by a series of tests. A field emission SEM was used to characterize the microstructure. Hardness was measured using a nano-indentation tester. Adhesion of coatings was evaluated using a Rockwell C hardness indentation tester. A pin-on-disk wear tester with WC balls as sliding counterparts was used to determine the wear properties. A self-designed compression and friction tester, by combining a Universal Testing Machine and a wear tester, was used to evaluate the contact behavior of composite CrTiSiN coated dies in compressing of Mg alloy sheets under high pressure. The results indicated that the hardness of composite CrTiSiN coating was lower than that of the TiAlN coating. However, the CrTiSiN coating showed better anti-wear performance. The CrTiSiN coated dies achieved smooth surfaces on the Mg alloy sheet in the compressing test and lower friction coefficient in the friction test, as compared with the TiAlN coating.Keywords
This publication has 30 references indexed in Scilit:
- Influence of Si on the microstructure of arc evaporated (Ti,Si)N thin films; evidence for cubic solid solutions and their thermal stabilitySurface and Coatings Technology, 2005
- Synthesis and mechanical properties of Cr–Si–N coatings deposited by a hybrid system of arc ion plating and sputtering techniquesSurface and Coatings Technology, 2004
- Mechanical properties of nanocomposite and multilayered Cr–Si–N sputtered thin filmsSurface and Coatings Technology, 2004
- Effect of aluminum concentration on friction and wear properties of titanium aluminum nitride filmsSurface and Coatings Technology, 2004
- Nano-crystalline filtered arc deposited (FAD) TiAlN PVD coatings for high-speed machining applicationsSurface and Coatings Technology, 2003
- Single layer and multilayer wear resistant coatings of (Ti,Al)N: a reviewMaterials Science and Engineering: A, 2003
- Friction and wear behavior of titanium nitride, zirconium nitride and chromium nitride coatings at elevated temperaturesSurface and Coatings Technology, 1995
- Nanoindentation and Nanoscratching of Hard Carbon Coatings for Magnetic DisksMRS Proceedings, 1995
- High-temperature oxidation of ion-plated TiN and TiAlN filmsJournal of Materials Research, 1993
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992