Behavior of Tilted Angle Shear Connectors
Open Access
- 7 December 2015
- journal article
- research article
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 10 (12) , e0144288
Abstract
According to recent researches, angle shear connectors are appropriate to transfer longitudinal shear forces across the steel-concrete interface. Angle steel profile has been used in different positions as L-shaped or C-shaped shear connectors. The application of angle shear connectors in tilted positions is of interest in this study. This study investigates the behaviour of tilted-shaped angle shear connectors under monotonic loading using experimental push out tests. Eight push-out specimens are tested to investigate the effects of different angle parameters on the ultimate load capacity of connectors. Two different tilted angles of 112.5 and 135 degrees between the angle leg and steel beam are considered. In addition, angle sizes and lengths are varied. Two different failure modes were observed consisting of concrete crushing-splitting and connector fracture. By increasing the size of connector, the maximum load increased for most cases. In general, the 135 degrees tilted angle shear connectors have a higher strength and stiffness than the 112.5 degrees type.Keywords
This publication has 9 references indexed in Scilit:
- RETRACTED: Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concreteEngineering Failure Analysis, 2014
- Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loadingConstruction and Building Materials, 2013
- Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental studyMaterials & Design (1980-2015), 2012
- Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concreteMaterials & Design (1980-2015), 2012
- Cyclic Performances of Shear Connectors2011
- Experimental and analytical study on channel shear connectors in fiber-reinforced concreteJournal of Constructional Steel Research, 2009
- Behavior of channel shear connectors, Part I: Experimental studyJournal of Constructional Steel Research, 2008
- Behavior of channel shear connectors, Part II: Analytical studyJournal of Constructional Steel Research, 2008
- THE TRANSFERRED SHEAR FORCE-RELATIVE DISPLACEMENT RELATIONSHIP OF THE SHEAR CONNECTOR IN STEEL-CONCRETE SANDWICH BEAM AND ITS MODELDoboku Gakkai Ronbunshuu E, 2008