High thermoelectric conversion through an optimal contribution of electronic carriers in polymeric mixed ionic–electronic conducting films
- 2 December 2024
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (3) , 1294-1309
Abstract
The optimal contribution of electronic carriers in polymeric mixed ionic–electronic conducting (MIEC) films was explored to achieve high thermoelectric (TE) conversion at a low temperature gradient (ΔT) using poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (P), potassium ferricyanide (F), and well-dispersed graphene flakes (G). In this composite (PFG) film, the active carriers were identified as CN− and electrons. The sulfonate groups in P effectively dispersed the graphene flakes into nanoscale electronic channels, while P and F provided ionic channels for CN− transport. By systematically varying the G content and humidity, a series of MIECs with broad electronic (σe) and ionic (σi) conductivity ranges were developed. Among these, the PFG film containing 3 wt% G (PFG3) exhibited a remarkable total Seebeck coefficient (S) of over −40 mV K−1 under conditions of a ΔT of 5.3 K, 80% RH and room temperature. Additionally, PFG3 demonstrated a stable voltage output (Vout) even after 3000 s. From the residual Vout, the electronic Seebeck coefficient (Se) was determined to be −990 μV K−1, the highest value reported for polymeric TE films. The simultaneous enhancement of Se and S in the same film indicated an optimized balance of electronic and ionic carrier contributions, further confirmed by the transference numbers and the conductivity ratio (σe/σi). The power density (PD) of the PFGs was also found to depend on σe/σi, underscoring the importance of controlling carrier contributions. Despite its MIEC nature, PFG3 efficiently transported electronic carriers through G channels, and the relationship of Sevs. σe aligned with a degenerate electronic model for PFGs. Scaling up the PFG3 film into a TE module yielded an energy density of 36.0 J m−2 and a PD of 18.6 mW m−2 for a ΔT of 4.9 K. The practical potential of the PFG system was demonstrated by successfully powering a diode for an extended period using TE energy harvesting and light-triggered photo-TE systems, highlighting the versatility and promise of this material for low-grade thermal energy applications.Keywords
Funding Information
- Ministry of Science, ICT and Future Planning (2018M3D1A1058536, RS-2023-00302697)
This publication has 83 references indexed in Scilit:
- Great Enhancement in the Thermopower of Ionic Liquid by a Metal‐Organic FrameworkAdvanced Functional Materials, 2023
- Giant Photo‐Magneto‐Thermoelectric Effect of End‐On Oriented PEDOT Grown from Self‐Assembled 3D TectonsAdvanced Functional Materials, 2021
- Embedding Aligned Graphene Oxides in Polyelectrolytes to Facilitate Thermo‐Diffusion of Protons for High Ionic Thermoelectric Figure‐of‐MeritAdvanced Functional Materials, 2021
- Ultrahigh Thermoelectric Power Generation from Both Ion Diffusion by Temperature Fluctuation and Hole Accumulation by Temperature GradientAdvanced Energy Materials, 2020
- Thermoelectric Properties of PEDOT:PSSAdvanced Electronic Materials, 2019
- Robust High Thermoelectric Harvesting Under a Self‐Humidifying Bilayer of Metal Organic Framework and Hydrogel LayerAdvanced Functional Materials, 2018
- Progress in Applications of Prussian Blue Nanoparticles in BiomedicineAdvanced Healthcare Materials, 2018
- Inkjet Printed Large‐Area Flexible Few‐Layer Graphene ThermoelectricsAdvanced Functional Materials, 2018
- Ionic Thermoelectric Figure of Merit for Charging of SupercapacitorsAdvanced Electronic Materials, 2017
- Thermoelectric Properties of Polymeric Mixed ConductorsAdvanced Functional Materials, 2016