CO2 Foaming of Polymer Nanocomposite Blends
- 14 June 2005
- journal article
- research article
- Published by CSIRO Publishing in Australian Journal of Chemistry
- Vol. 58 (6) , 492-503
Abstract
Nanoparticles are suitable to nucleate small foam cells and simultaneously reinforce the thin foam cell walls. In this paper, it is found that the foam morphology and the physical properties are greatly influenced by the dispersion of nanoclay, the clay surface modification, and the nanocomposite blend morphology. The addition of nanoclay to polystyrene (PS) strongly affects the nucleation of foam bubbles, especially after exfoliation and proper surface modification. CO2 appears to nucleate on the solid clay surface with a CO2-affinitive surface modifier. PS/(PMMA/MHABS) nanocomposite blends composed of polystyrene and poly(methyl methacrylate)/nanoclay exfoliated nanocomposite show an unexpected trend that bubble nucleation inversely correlates with domain size, where the bigger PMMA/MHABS domains are significant in nucleating more bubbles. The total influence volume, formed by the CO2 diffusion from the PMMA/MHABS phase to the PS phase where CO2 concentration decreases from a high value in the former to a low value in the latter, is related to the domain size and determines the nucleation efficiency in the PS phase. The physical properties of PS nanocomposites exhibit unique behaviour in the presence of CO2.Keywords
This publication has 71 references indexed in Scilit:
- Continuous microcellular polystyrene foam extrusion with supercritical CO2Polymer Engineering & Science, 2002
- Rapid Polymer/Gas Solution Formation for Continuous Production of Microcellular PlasticsJournal of Manufacturing Science and Engineering, 1996
- Filamentary extrusion of microcellular polymers using a rapid decompressive elementPolymer Engineering & Science, 1996
- Experimental Characterization of the Tensile Behavior of Microcellular Polycarbonate FoamsJournal of Engineering Materials and Technology, 1994
- A Process to Produce Microcellular PVCInternational Polymer Processing, 1993
- Bubble nucleation in polymeric liquids. II. theoretical considerationsJournal of Polymer Science Part B: Polymer Physics, 1990
- Bubble nucleation in polymeric liquids. I. Bubble nucleation in concentrated polymer solutionsJournal of Polymer Science Part B: Polymer Physics, 1990
- Rheological properties of mixtures of molten polymer and fluorocarbon blowing agent. II. Mixtures of polystyrene and fluorocarbon blowing agentJournal of Applied Polymer Science, 1983
- Rheological properties of mixtures of molten polymer and fluorocarbon blowing agent. I. Mixtures of low‐density polyethylene and fluorocarbon blowing agentJournal of Applied Polymer Science, 1983
- Studies on structural foam processing I. The rheology of foam extrusionPolymer Engineering & Science, 1978