Abstract
Purpose: This study develops a unified experimental framework to compare four sustainable binder systems-Super Fly Ash Plus (SFAP), silica fume, high-strength ordinary Portland cement (OPC), and an alkali-activated slag self-compacting concrete (AAS-SCC)-in order to support performance-based selection of low-carbon structural concretes. Methods: Four series of structural concretes were evaluated: normal-strength OPC with 0-10% SFAP replacement, high-strength OPC with 500-600 kg/m³ cement, OPC with 0-30% silica fume, and an AAS-SCC with a ground granulated blast-furnace slag-silica fume binder. Unconfined compressive strength tests on 150 × 300 mm cylinders were carried out up to 28 days, and stressstrain data from the SFAP series were used to determine initial and secant moduli. A least-squares linear regression quantified the relationship between SFAP replacement and 28-day strength. Results: SFAP replacement at 5-10% increased 28-day strength from 37.65 MPa to 49.84-52.78 MPa and enhanced stiffness. Silica fume replacement up to 30% produced substantial strength gains in the high-strength range. Increasing cement content from 500 to 600 kg/m³ yielded progressively smaller marginal strength gains. The AAS-SCC achieved about 22 MPa at 1 day and 28-day strengths comparable to high-strength OPC, while completely eliminating clinker. Conclusion: The combined results show that optimized use of SFAP, silica fume, and alkaliactivated slag can deliver structural-strength concretes with significantly reduced clinker content. The unified dataset and SFAP regression provide experimentally grounded relationships between binder composition and strength, supporting performance-based selection of low-carbon binder strategies for structural applications.