Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tadeh Zirakian has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Distortional buckling assessment of CFRP-strengthened thin-walled steel plate girders: Experimental and numerical investigation

    by Raman Haiati, Hossein Showkati, Salar Rasti, Farzam Sefidiyan, Sami Kadhim Najm, Tadeh Zirakian

  • Integrated risk management framework for international civil engineering projects

    by Tadeh Zirakian

    International civil engineering projects are exposed to political, financial, technical, environmental, and organisational risks that frequently interact and evolve throughout the project lifecycle. Existing risk-management approaches, including the Integrated Project Risk Assessment (IPRA) tool, fuzzy logic, structural equation modelling (SEM), and resilience engineering, are typically applied independently, limiting their ability to support integrated decision making. This study develops an integrated conceptual framework that combines these complementary approaches within a unified risk-management process. A structured literature review guided by PRISMA 2020 covered publications from January 2000 to March 2024, supplemented by a targeted literature update through August 2026. The review identified and synthesised studies addressing structured risk identification, uncertainty modelling, risk interdependencies, and resilience-based management. Within the evidence identified through these searches, no publication explicitly integrated IPRA, fuzzy logic, SEM, and resilience engineering within a single framework for international civil engineering projects. The proposed framework links structured risk identification, uncertainty-aware risk evaluation, interdependency analysis, and adaptive management through iterative information flows and feedback mechanisms. The framework provides a structured basis for supporting risk-informed decision making and establishes a foundation for future empirical validation and implementation in the management of complex international civil engineering projects.

  • Open Access

    Beyond Recycling: A Life-Cycle and Performance-Based Framework for Integrating End-of-Life Wind Turbine Blade Waste into Sustainable Construction Materials

    by Amirhossein Arman, Maryam Mollaei, Tadeh Zirakian, Erfan Shafei, Akbar Shirzad

    The rapid expansion of wind power is creating a growing stream of end-of-life wind turbine blades whose composite materials are difficult to recycle and increasingly restricted from landfill. In parallel, the construction sector is under pressure to decarbonize by reducing the consumption of virgin aggregates, cement and conventional structural components. This review critically examines recent advances in reusing wind turbine blade waste (WTBW) in civil engineering applications. First, the composition of wind turbine blades, projected waste volumes and current end-of-life pathways are summarized, including mechanical, thermal and chemical recycling routes. The review then focuses on three reuse categories: (i) WTBW as a replacement material in concrete, mortar and soil; (ii) WTBW as an additive or filler in cementitious and geopolymer systems; and (iii) structural and architectural reuse of blade segments in bridges, shelters and building components. For each category, representative studies are compared in terms of mix design, mechanical and durability performance and, where available, lifecycle assessment results. The analysis highlights both the potential and the limitations of current approaches and identifies key research and standardization needs to support safe, reliable and environmentally beneficial reuse of WTBW in the built environment.

  • Open Access

    Experimental and Comparative Study on Microsilica-Basalt UHPC for Enhanced Strength and Sustainability

    by Amirhossein Arman, Tadeh Zirakian, Erfan Shafei

    This study presents an integrated experimental investigation on the influence of microsilica (MS) incorporation and aggregate type on the mechanical and sustainability performance of Ultra-High-Performance Concrete (UHPC). Two experimental phases were designed to (i) optimize MS replacement levels (0-25%) and (ii) compare the mechanical behavior of UHPC prepared with basalt and river aggregates under identical conditions. All mixtures maintained a low water-to-binder (W/B) ratio (0.18-0.20) and incorporated a polycarboxylate-based superplasticizer to ensure uniform dispersion and workability. Compressive strength tests were conducted at 7, 14, and 28 days to evaluate strength development trends. Results revealed that incorporating 15-25% microsilica (MS) increased the 28-day compressive strength of UHPC by up to 45%, achieving a maximum of 154 MPa when combined with basalt aggregates. The optimized mix reduced cement usage by approximately 20-25%, directly lowering potential CO₂ emissions without compromising workability. Comparative benchmarking with recent UHPC studies confirmed that the developed mixtures exhibit competitive or superior strengthsustainability performance, offering practical guidance for high-durability, low-carbon concrete design.

  • Open Access

    Comparative Experimental Study of Sustainable Binder Systems for Structural Concrete Using Super Fly Ash Plus, Silica Fume, and Alkali-Activated Slag

    by Amirhossein Arman, Tadeh Zirakian, Erfan Shafei

    Purpose: This study develops a unified experimental framework to compare four sustainable binder systems-Super Fly Ash Plus (SFAP), silica fume, high-strength ordinary Portland cement (OPC), and an alkali-activated slag self-compacting concrete (AAS-SCC)-in order to support performance-based selection of low-carbon structural concretes. Methods: Four series of structural concretes were evaluated: normal-strength OPC with 0-10% SFAP replacement, high-strength OPC with 500-600 kg/m³ cement, OPC with 0-30% silica fume, and an AAS-SCC with a ground granulated blast-furnace slag-silica fume binder. Unconfined compressive strength tests on 150 × 300 mm cylinders were carried out up to 28 days, and stressstrain data from the SFAP series were used to determine initial and secant moduli. A least-squares linear regression quantified the relationship between SFAP replacement and 28-day strength. Results: SFAP replacement at 5-10% increased 28-day strength from 37.65 MPa to 49.84-52.78 MPa and enhanced stiffness. Silica fume replacement up to 30% produced substantial strength gains in the high-strength range. Increasing cement content from 500 to 600 kg/m³ yielded progressively smaller marginal strength gains. The AAS-SCC achieved about 22 MPa at 1 day and 28-day strengths comparable to high-strength OPC, while completely eliminating clinker. Conclusion: The combined results show that optimized use of SFAP, silica fume, and alkaliactivated slag can deliver structural-strength concretes with significantly reduced clinker content. The unified dataset and SFAP regression provide experimentally grounded relationships between binder composition and strength, supporting performance-based selection of low-carbon binder strategies for structural applications.

  • Open Access

    Reusing End-of-Life Wind Turbine Blade Waste in Civil Engineering: A Critical Review of Structural, Material, and Environmental Performance Type of the Paper: Review

    by Amirhossein Arman, Tadeh Zirakian, Erfan Shafei, Akbar Shirzad

    The rapid expansion of wind power is creating a growing stream of end-of-life wind turbine blades whose composite materials are difficult to recycle and increasingly restricted from landfill. In parallel, the construction sector is under pressure to decarbonise by reducing the consumption of virgin aggregates, cement and conventional structural components. This review critically examines recent advances in reusing wind turbine blade waste (WTBW) in civil engineering applications. First, the composition of wind turbine blades, projected waste volumes and current end-of-life pathways are summarised, including mechanical, thermal and chemical recycling routes. The review then focuses on three reuse categories: (i) WTBW as a replacement material in concrete, mortar and soil; (ii) WTBW as an additive or filler in cementitious and geopolymer systems; and (iii) structural and architectural reuse of blade segments in bridges, shelters and building components. For each category, representative studies are compared in terms of mix design, mechanical and durability performance and, where available, life-cycle assessment results. The analysis highlights both the potential and the limitations of current approaches and identifies key research and standardisation needs to support safe, reliable and environmentally beneficial reuse of WTBW in the built environment.

  • Open Access

    Effect of Rice Husk Ash on Compressive Strength Development of Sustainable Concrete

    by Amirhossein Arman, Majid Taghvaei, Tadeh Zirakian, Aliasghar Amirkardoust, Raziyeh Sistaninezhad, Davood Sedaghat Shayegan, Sara Taghvaei

    The growing demand for sustainable construction materials has increased interest in the use of supplementary cementitious materials and nano-scale additives in concrete production. This study investigates the synergistic effects of rice husk ash (RHA) and nano-clay (NC) on the compressive strength development of concrete. 16 concrete mixtures were prepared using RHA replacement levels of 0%, 5%, 10%, and 15% and NC contents of 0%, 1%, 2%, and 3% by weight of cement. Concrete cube specimens (100 × 100 × 100 mm) were cast, water-cured, and tested for compressive strength at 28 and 56 days. For each mixture and testing age, 3 specimens were tested and the average value was reported. The results showed that both RHA and NC positively influenced the compressive strength of concrete. The control mixture achieved a compressive strength of 47 MPa, whereas the highest strength of 60 MPa was obtained for the mixture containing 1% NC and 15% RHA, corresponding to a 27% increase compared with the control concrete. The findings demonstrate that the combined use of NC and RHA can effectively enhance the mechanical performance of concrete while promoting more sustainable construction practices.

  • Open Access

    Effect of Nano-Clay Dosage on the Compressive Strength Development of Concrete

    by Amirhossein Arman, Majid Taghvaei, Tadeh Zirakian, Aliasghar Amirkardoust, Raziyeh Sistaninezhad, Davood Sedaghat Shayegan, Sara Taghvaei

    The increasing demand for high-performance and sustainable concrete has encouraged the use of nano-scale materials to improve the properties of cementitious composites. Among these materials, nano-clay (NC) has attracted significant attention due to its high specific surface area and ability to modify the microstructure of concrete. This study investigates the influence of nano-clay on the compressive strength development of concrete. Four concrete mixtures containing 0%, 1%, 2%, and 3% nano-clay by weight of cement were prepared and tested. Concrete cube specimens measuring 100 × 100 × 100 mm were cast, water-cured, and tested for compressive strength at 28 and 56 days. For each mixture and testing age, three specimens were tested and the average value was reported. The results demonstrated that the incorporation of nano-clay significantly improved the compressive strength of concrete. The control mixture achieved compressive strengths of 44 MPa and 50 MPa at 28 and 56 days, respectively. The highest strengths of 55 MPa and 65 MPa were obtained for the mixture containing 1% NC. Compared with the control concrete, the optimum mixture exhibited increases of approximately 25% and 30% at 28 and 56 days, respectively. However, further increases in nano-clay content resulted in reduced strength, indicating the existence of an optimum dosage. The findings suggest that NC can effectively enhance concrete strength through micro-filling and nucleation effects, making it a promising nano-modifier for performance concrete.

  • Open Access

    Synergistic Effects of Nano-Clay and Rice Husk Ash on Compressive Strength Development of Concrete

    by Amirhossein Arman, Majid Taghvaei, Tadeh Zirakian, Aliasghar Amirkardoust, Raziyeh Sistaninezhad, Davood Sedaghat Shayegan, Sara Taghvaei

    The growing demand for sustainable construction materials has increased interest in the use of supplementary cementitious materials and nano-scale additives in concrete production. This study investigates the synergistic effects of rice husk ash (RHA) and nano-clay (NC) on the compressive strength development of concrete. 16 concrete mixtures were prepared using RHA replacement levels of 0%, 5%, 10%, and 15% and NC contents of 0%, 1%, 2%, and 3% by weight of cement. Concrete cube specimens (100 × 100 × 100 mm) were cast, water-cured, and tested for compressive strength at 28 and 56 days. For each mixture and testing age, 3 specimens were tested and the average value was reported. The results showed that both RHA and NC positively influenced the compressive strength of concrete. The control mixture achieved a compressive strength of 47 MPa, whereas the highest strength of 60 MPa was obtained for the mixture containing 1% NC and 15% RHA, corresponding to a 27% increase compared with the control concrete. The findings demonstrate that the combined use of NC and RHA can effectively enhance the mechanical performance of concrete while promoting more sustainable construction practices.

  • Seismic performance of reinforced concrete shear walls with hybrid shape memory alloy–steel reinforcement

    by Tadeh Zirakian

    This study investigates the seismic performance of reinforced concrete (RC) shear walls enhanced with hybrid shape memory alloy (SMA)–steel reinforcement, addressing the challenge of residual deformations in conventional systems. A user-defined material subroutine (UMAT) was developed in the Fortran programming language to simulate the superelastic behaviour of nickel titanium SMA in the Abaqus software program. Both single and coupled wall systems were modelled and subjected to non-linear time-history analyses using the El Centro (1940) and Koyna (1967) earthquake records. Results show that SMA reinforcement can reduce residual drift by up to 70–80% depending on reinforcement ratio compared to traditional steel-only walls. Notably, hybrid configurations such as 4% SMA + 2% steel achieved performance comparable to full-SMA systems, offering a more cost-efficient solution. The numerical model was benchmarked against published results, confirming the accuracy of the simulation approach. These findings demonstrate that SMA–steel hybrid reinforcement is a practical, validated and resilient strategy for seismic design, aligning with contemporary performance-based engineering objectives.