Impact of Electron Transport Layers on Hysteresis and Performance of Ambient‐Processed Perovskite Solar Cells
Open Access
- 15 April 2026
- journal article
- research article
- Published by Wiley in ChemSusChem
- Vol. 19 (8) , e202502742
Abstract
Ambient processing of perovskite solar cells (PSCs) offers a promising route to scalable and low‐cost manufacturing. While substantial progress has been achieved in improving power conversion efficiency (PCE), the hysteresis behavior of ambient‐processed devices remains insufficiently understood. This study examines hysteresis in PSCs fabricated in ambient air at 40–65% Relative humidity (RH) using multiple absorber compositions, including MAPbI 3 , CsFAPbI 3 , and Cs 2 AgBiBr 6 . Severe hysteresis is observed in devices employing planar TiO 2 or SnO 2 electron transport layers (ETLs), attributed to amplified moisture‐ and oxygen‐induced defect formation in ambient air. To overcome this challenge, ETL architecture is systematically engineered by adjusting planar TiO 2 thickness and incorporating mesoscopic TiO 2 architecture with controlled thicknesses. An optimized configuration featuring an approximately 140 nm mesoporous layer substantially reduces hysteresis, lowering the hysteresis index (HI) in MAPbI 3 PSCs from 0.52 for planar TiO 2 to 0.19, enhancing stability while maintaining high PCE. Similar improvements are demonstrated for CsFAPbI 3 , where the HI decreases from 0.56 for planar TiO 2 and 0.47 for planar SnO 2 to 0.38, and for Cs 2 AgBiBr 6 , where the HI decreases from 0.32 to 0.08. These findings highlight ETL structural engineering as an effective strategy for mitigating hysteresis and enabling reliable ambient‐processed PSCs for scalable manufacturing.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/X03660X/1 and EP/V008188/1)
This publication has 41 references indexed in Scilit:
- Printing High‐Efficiency Perovskite Solar Cells in High‐Humidity Ambient Environment—An In Situ Guided InvestigationAdvanced Science, 2021
- Controlling Homogenous Spherulitic Crystallization for High‐Efficiency Planar Perovskite Solar Cells Fabricated under Ambient High‐Humidity ConditionsSmall, 2019
- On the Current–Voltage Hysteresis in Perovskite Solar Cells: Dependence on Perovskite Composition and Methods to Remove HysteresisAdvanced Materials, 2019
- Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresisNature Communications, 2016
- Electric-Field-Induced Degradation of Methylammonium Lead Iodide Perovskite Solar CellsThe Journal of Physical Chemistry Letters, 2016
- Origin of J–V Hysteresis in Perovskite Solar CellsThe Journal of Physical Chemistry Letters, 2016
- Ionic transport in hybrid lead iodide perovskite solar cellsNature Communications, 2015
- Nucleation and Crystal Growth of Organic–Inorganic Lead Halide Perovskites under Different Relative HumidityACS Applied Materials & Interfaces, 2015
- Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cellsNature Communications, 2014
- Parameters Affecting I–V Hysteresis of CH3NH3PbI3 Perovskite Solar Cells: Effects of Perovskite Crystal Size and Mesoporous TiO2 LayerThe Journal of Physical Chemistry Letters, 2014