Interactive Effects of Antioxidants, Acid Scavengers, and HALS on the Material Properties of Polypropylene Copolymer Considering γ‐Radiation Sterilization and Recycling for Medical Devices
Open Access
- 1 January 2026
- journal article
- Published by Wiley in Advances in Polymer Technology
- Vol. 2026 (1)
Abstract
Global plastic production and consumption have risen continuously over past decades, increasing the need for sustainable end‐of‐life strategies. The present study provides a systematic assessment of how repeated processing and γ‐irradiation affect the stability, additive consumption, and performance of polypropylene copolymers (PP‐C) intended for closed‐loop recycling in medical technology. Applying a design of experiments approach with Irganox 1010, Irgafos 168, Tinuvin 622, and calcium stearate (CaSt), the results identify γ‐irradiation as the dominant factor dominating additive depletion, molecular degradation, and optical aging. Phenolic and phosphite antioxidants were rapidly consumed after irradiation, frequently falling below quantifiable levels, whereas processing alone caused only moderate degradation. Pronounced synergistic interactions between Irganox 1010 and Irgafos 168 were confirmed, particularly in combination with CaSt, enabling both stabilizers to remain effective over multiple cycles. Tinuvin 622 exhibited fluctuating behavior consistent with regeneration mechanisms associated with the Denisov cycle. Changes in yellowness, tensile properties, and zero shear viscosity further demonstrate that irradiation, rather than mechanical recycling, drives deterioration and rheological instability. These findings underline that successful recycling of γ‐sterilized PP‐C requires tailored additive systems and highlight stabilizer engineering as a key factor for ensuring material safety, performance, and sustainability in circular medical plastics.Keywords
This publication has 48 references indexed in Scilit:
- How the Interplay of Accelerated Aging and Sterilization by γ ‐Irradiation Influences the Recyclability of Medical Polypropylene CopolymerPolymers for Advanced Technologies, 2026
- Exposition of Radiation‐Stabilized Polypropylene Copolymer to Repeated Injection Molding and γ ‐RadiationJournal of Applied Polymer Science, 2025
- Early‐Stage Degradation and Stabilization of Polypropylene Under Simulated Mechanical Recycling: Assessment and Practical IndicatorsJournal of Applied Polymer Science, 2025
- Investigation of X‐Rays, e‐Beam, and Gamma Irradiation on Chemical, Thermal, and Mechanical Properties of Polypropylene‐DerivativesMacromolecular Chemistry and Physics, 2025
- Deterioration of Polypropylene Random Copolymer Formulations Based on Phenolic Antioxidants and Non‐Phenolic Stabilizers at Elevated Temperatures in Hot AirJournal of Applied Polymer Science, 2024
- Stability assessment of a commercial polypropylene copolymer and Irgafos 168 under repeated injection molding and γ‐irradiation cyclesJournal of Applied Polymer Science, 2023
- How Should US Health Care Lead Global Change in Plastic Waste Disposal?AMA Journal of Ethics, 2022
- Degradation studies of a commercial radiation‐resistant polypropylene sterilized by gamma and electron beam technology before and after subsequent accelerated aging cyclesJournal of Applied Polymer Science, 2019
- The effect of gamma and electron beam irradiation on the thermal and mechanical properties of injection‐moulded high crystallinity poly(propylene)Polymer Composites, 2008
- The effects of γ-irradiation on compositional changes in plastic packaging filmsPackaging Technology and Science, 1999