Highly Efficient Lightweight Flexible Cu(In,Ga)Se2 Solar Cells with a Narrow Bandgap Fabricated on Polyimide Substrates: Impact of Ag Alloying, Cs and Na Doping, and Front Shallow Ga Grading on Cell Performance
Open Access
- 16 December 2024
- journal article
- research article
- Published by Wiley in Small Science
- Vol. 5 (2) , 2400404
Abstract
Herein, lightweight, flexible Cu(In,Ga)Se2 (CIGS) solar cells with a narrow bandgap of ≈1 eV are grown on polyimide substrates. The poor performance of the CIGS solar cells owing to a low growth temperature (≈400 °C) is considerably improved via Ag alloying, Na doping using alkali‐silicate‐glass thin layers (ASTLs) and the CsF postdeposition treatment (CsF‐PDT), and front shallow Ga grading (surface field; SF). Along with improved device process, a notably high conversion efficiency of 21.2%, low VOC deficit of 0.346 V, and high JSC of ≈40 mA cm−2 are achieved. Ag alloying and Na doping using ASTLs predominantly improve the CIGS bulk quality, while the CsF‐PDT and SF reduce carrier recombination at the CIGS/CdS interface and vicinity. Device simulations reveal that the SF increases the electrical field at the CIGS surface under the forward bias voltage close to VOC owing to electron injection from the CdS side, which increases the chemical potential. Thus, the SF effectively repulses holes and improves the interfacial property. Device simulations also reveal that a high CIGS absorber's quality is prerequisite to benefit from the SF. Thus, CIGS solar cells showing improved bulk quality due to optimum alkali doping and Ag alloying considerably benefit from the SF.Keywords
Funding Information
- New Energy and Industrial Technology Development Organization
This publication has 52 references indexed in Scilit:
- Mechanical stacked GaAs//CuIn1−yGaySe2three‐junction solar cells with 30% efficiency via an improved bonding interface and area current‐matching techniqueProgress in Photovoltaics: Research and Applications, 2022
- Impact of RbF and NaF Postdeposition Treatments on Charge Carrier Transport and Recombination in Ga‐Graded Cu(In,Ga)Se2 Solar CellsAdvanced Functional Materials, 2021
- III‐V//CuxIn1−yGaySe2 multijunction solar cells with 27.2% efficiency fabricated using modified smart stack technology with Pd nanoparticle array and adhesive materialProgress in Photovoltaics: Research and Applications, 2021
- Influence of Ga back grading on voltage loss in low‐temperature co‐evaporated Cu(In,Ga)Se2 thin film solar cellsProgress in Photovoltaics: Research and Applications, 2021
- Silver‐Promoted High‐Performance (Ag,Cu)(In,Ga)Se2 Thin‐Film Solar Cells Grown at Very Low TemperatureSolar RRL, 2021
- Monolithic Perovskite Tandem Solar Cells: A Review of the Present Status and Advanced Characterization Methods Toward 30% EfficiencyAdvanced Energy Materials, 2020
- Heavy Alkali Treatment of Cu(In,Ga)Se2 Solar Cells: Surface versus Bulk EffectsAdvanced Energy Materials, 2020
- Advanced Alkali Treatments for High‐Efficiency Cu(In,Ga)Se2 Solar Cells on Flexible SubstratesAdvanced Energy Materials, 2019
- Effects of heavy alkali elements in Cu(In,Ga)Se2solar cells with efficiencies up to 22.6%Physica Status Solidi (RRL) – Rapid Research Letters, 2016
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004