LEAP-ASIA-2019 Simulation Exercise: Calibration of Constitutive Models and Simulations of the Element Tests
Authors:
Open Access
- 24 February 2024
- book chapter
- Published by Springer Nature
- p. 35-60
Abstract
This chapter presents a summary of the calibration exercises (i.e., element test simulations) submitted by nine numerical simulation teams that participated in the LEAP-ASIA-2019 prediction campaign. The standard sand selected for the campaign is Ottawa F-65, and researchers have developed several efforts to increase the database of laboratory tests to characterize the physical and mechanical properties of this sand (Carey TJ, Stone N, Kutter BL, Grain Size Analysis and Maximum and Minimum Dry Density of Ottawa F-65 Sand for LEAP-UCD-2017. Model tests and numerical simulations of liquefaction and lateral spreading: LEAP-UCD-2017. Springer, 2019; El Ghoraiby MA, Park H, Manzari MT. Physical and mechanical properties of Ottawa F65 sand. In: Model tests and numerical simulations of liquefaction and lateral spreading: LEAP-UCD-2017, Springer, 2019; Ueda K, Vargas RR, Uemura K, LEAP-Asia-2018: Stress-strain response of Ottawa sand in Cyclic Torsional Shear Tests, DesignSafe-CI [publisher], Dataset, https://doi.org/10.17603/DS2D40H, 2018; Vargas RR, Ueda K, Uemura K, Soil Dyn Earthq Eng 133:106111, 2020; Vargas RR, Ueda K, Uemura K, Dynamic torsional shear tests of Ottawa F-65 Sand for LEAP-ASIA-2019. Model tests and numerical simulations of liquefaction and lateral spreading: LEAP-ASIA-2019, Springer, 2023). The objective of this element test simulation exercise is to assess the performance of the constitutive models used by the simulation teams for simulating the experimental results of a series of undrained stress-controlled cyclic torsional shear tests on Ottawa F-65 sand for two different relative densities (Dr = 50% and 60%) (Ueda K, Vargas RR, Uemura K, LEAP-Asia-2018: Stress-strain response of Ottawa sand in Cyclic Torsional Shear Tests, DesignSafe-CI [publisher], Dataset, https://doi.org/10.17603/DS2D40H, 2018; Vargas RR, Ueda K, Uemura K, Soil Dyn Earthq Eng 133:106111, 2020; Vargas RR, Ueda K, Uemura K, Dynamic torsional shear tests of Ottawa F-65 sand for LEAP-ASIA-2019. Model tests and numerical simulations of liquefaction and lateral spreading: LEAP-ASIA-2019, Springer, 2023). The simulated liquefaction strength curves demonstrate that majority of the constitutive models are capable of reasonably capturing the measured liquefaction strength curves both for Dr = 50% and 60%. However, the simulated stress paths and stress-strain relationships show some differences from the corresponding laboratory tests in some cases.Keywords
This publication has 9 references indexed in Scilit:
- LEAP-ASIA-2019 Numerical Simulations Using a Strain Space Multiple Mechanism Model for a Liquefiable Sloping Ground2024
- Class-C Simulations of LEAP-ASIA-2019 via OpenSees Platform by Using a Pressure Dependent Multi-yield Surface Model2024
- LEAP-ASIA-2019 Centrifuge Test Simulations of Liquefiable Sloping Ground2024
- Type-C Simulations of Centrifuge Tests from LEAP-ASIA-2019 Using SANISAND-Sf2024
- Dynamic Torsional Shear Tests of Ottawa F-65 Sand for LEAP-ASIA-20192024
- LEAP-ASIA-2019 Simulations at Tsinghua University2024
- Influence of the relative density and K0 effects in the cyclic response of Ottawa F-65 sand - cyclic Torsional Hollow-Cylinder shear tests for LEAP-ASIA-2019Soil Dynamics and Earthquake Engineering, 2020
- Physical and Mechanical Properties of Ottawa F65 Sand2019
- Ottawa F-65 Sand Data from Ana Maria Parra Bastidas