Performance Study and Energy Saving Process Analysis of Hybrid Absorption-Compression Refrigeration Cycles
- 14 September 2016
- journal article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 138 (6) , 061603
Abstract
In an attempt to improve the performance of hybrid absorption and mechanical vapor compression refrigeration systems and to determine the fundamental reasons for such improvements, two configurations of the hybrid refrigeration cycle with a booster compressor at different positions of the cycle (between the evaporation and the absorber, or between the generator and the condenser) are simulated and analyzed. The interrelation between the two subcycles and the hybridization principle have been explored and clarified. An NH3/H2O-based hybrid cycle is the basis of this simulation. It was found that (1) the hybrid cycle performance is mainly governed by the interaction between its two subcycles of mechanical compression and thermal compression and their respective energy efficiencies, and (2) the hybrid cycle primary energy-based coefficient of performance (COP) was higher by up to 15% (without internal heat recuperation) as compared with the nonhybrid absorption cycle, (3) in comparison with the nonhybrid absorption and vapor compression cycles working in the same temperature regions, the more efficient use of low-temperature heat by cascade utilization of the two energy inputs (heat rate and mechanical power) with different energy quality, and the enhanced refrigeration ability of low-temperature heat are the basic reasons for the hybrid cycle performance improvement and significant energy saving, (4) the hybrid cycle achieves an exergy efficiency of 36.5%, which is 27% higher than that of the absorption cycle, and 4.5% higher than the vapor compression cycle, achieving a thermal-driving exergy efficiency of 37.5% and mechanical work saving ratio up to 64%.Keywords
This publication has 16 references indexed in Scilit:
- A novel absorption refrigeration cycleApplied Thermal Engineering, 2010
- Ammonia-lithium nitrate absorption chiller with an integrated low-pressure compression booster cycle for low driving temperaturesApplied Thermal Engineering, 2010
- Studies of compressor pressure ratio effect on GAXAC (generator–absorber–exchange absorption compression) coolerApplied Energy, 2008
- Review of solar sorption refrigeration technologies: Development and applicationsRenewable and Sustainable Energy Reviews, 2007
- Simulation studies on GAX absorption compression coolerEnergy Conversion and Management, 2007
- Performance analysis of advanced hybrid GAX cycles: HGAXInternational Journal of Refrigeration, 2004
- Simulation of the compressor-assisted triple-effect H2O/LiBr absorption cooling cyclesApplied Thermal Engineering, 2002
- A new absorption refrigeration cycle using solar energySolar Energy, 1999
- Performance of double effect absorption compression cycles for air-conditioning using methanol–TEGDME and TFE–TEGDME systems as working pairsInternational Journal of Refrigeration, 1998
- Ammonia/lithium nitrate absorption/compression refrigeration cycle. Part I. SimulationApplied Thermal Engineering, 1997