Cavitation Erosion of Cermet-Coated Aluminium Bronzes
Open Access
Abstract
The cavitation erosion resistance of CuAl10Ni5Fe2.5Mn1 following plasma spraying with Al2O3·30(Ni20Al) powder and laser re-melting was analyzed in view of possible improvements of the lifetime of components used in hydraulic environments. The cavitation erosion resistance was substantially improved compared with the one of the base material. The thickness of the re-melted layer was in the range of several hundred micrometers, with a surface microhardness increasing from 250 to 420 HV 0.2. Compositional, structural, and microstructural explorations showed that the microstructure of the re-melted and homogenized layer, consisting of a cubic Al2O3 matrix with dispersed Ni-based solid solution is associated with the hardness increase and consequently with the improvement of the cavitation erosion resistance.Keywords
Funding Information
- Romanian National Authority for Scientific Research, CNCS – UEFISCDI (PN-II-ID-PCE-2011-3-0837)
This publication has 15 references indexed in Scilit:
- Abrasion, Erosion and Cavitation Erosion Wear Properties of Thermally Sprayed Alumina Based CoatingsCoatings, 2014
- Laser surface modification treatment of aluminum bronze with B4CApplied Surface Science, 2012
- Laser nitriding of the surface of phosphor bronzeThe International Journal of Advanced Manufacturing Technology, 2012
- Analysis of cavitation erosion resistance of cast iron and nonferrous metals based on database and comparison with carbon steel dataWear, 2010
- Microstructure of Laser Cladding Ni-Base Alloy on Manganese BronzeChinese Journal of Lasers, 2008
- Structure and properties of the bronze laser alloyed with titaniumApplied Surface Science, 2007
- Improvement in cavitation erosion resistance of a copper-based propeller alloy by laser surface meltingSurface and Coatings Technology, 2004
- The effect of stacking fault energy on the cavitation erosion resistance of α-phase aluminum bronzesWear, 2002
- Correlation between erosion behaviour and stacking fault energy in copper alloysActa Metallurgica, 1984
- The stacking fault energy and delamination wear of single-phase f.c.c. metalsWear, 1977