Effect of Carbon Partitioning on Abnormal Martensite Hardening in a Conventional Quench and Temper Medium Silicon Low Alloy Steel under Ferrite-Martensite Dual-Phase Microstructure
- 30 May 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in HTM Journal of Heat Treatment and Materials
- Vol. 78 (3) , 141-161
Abstract
The purpose of this research work was to investigate the effect of carbon partitioning within ferrite and prior austenite (martensite) during progress of ferrite formation and consequently its relation to the associated martensite hardening in a medium silicon low alloy conventional quench and temper steel. For this aim, several ferrite-martensite dual-phase (DP) samples containing various volume fractions of ferrite and martensite microphases were developed. The X-ray diffraction and electron microscopy with spot and line-scan X-ray energy-dispersive spectroscopy (EDS) for carbon analysis were used in conjunction with light microscopy and hardness test to follow the variation of carbon partitioning within ferrite and prior austenite (martensite) regions and consequently the associated martensite hardening in the DP samples.Keywords
This publication has 41 references indexed in Scilit:
- Characterization of Dual-Phase Steel Microstructure by Combined Submicrometer EBSD and EPMA Carbon MeasurementsMicroscopy and Microanalysis, 2013
- Effect of Grain Size on Thermal and Mechanical Stability of Austenite in Metastable Austenitic Stainless SteelISIJ International, 2013
- Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steelsActa Materialia, 2011
- Characterization of microstructure obtained by quenching and partitioning process in low alloy martensitic steelMaterials Science and Engineering: A, 2010
- Effect of austenite grain size on the transformation kinetics of upper and lower bainite in a low-alloy steelScripta Materialia, 2008
- Microstructure and tensile properties of high strength duplex ferrite–martensite (DFM) steelsMaterials Science and Engineering: A, 2007
- Effect of cryogenic treatment on the mechanical properties of 4340 steelJournal of Materials Processing Technology, 2007
- Microstructural characterization in a hot-rolled, two-phase steelMaterials Characterization, 2001
- On the effect of the volume fraction on martensite on the tensile strength of dual-phase steelMaterials Science and Engineering, 1988
- A profile refinement method for nuclear and magnetic structuresJournal of Applied Crystallography, 1969