Planetary Gear Fault Detection Based on Mechanical Torque and Stator Current Signatures of a Wound Rotor Induction Generator
- 28 February 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 33 (3) , 1072-1085
Abstract
In this paper, an approach for tooth localized fault detection in the sun gear of a planetary gear, using the measured mechanical torque and the stator current of a wound rotor induction generator (WRIG), is proposed. A theoretical background is developed to demonstrate that the faulty sun gear produces periodic fault signatures in the mechanical torque and consequently fault-related frequencies in the stator current of the WRIG. The employed technique needs knowledge of mechanical system torsional natural frequencies, which aid in identifying the most sensitive fault characteristic harmonics in both mechanical torque and stator current spectra. It is illustrated by simulation and experimental results that the amplitude of these harmonics can be used as a fault index for diagnosis of tooth localized defect in planetary gears. A test rig based on a 5.5 kW WRIG, shaft connected to the sun gear of a planetary gear through a high-speed shaft and couplings, was utilized for validation of the proposed technique.Keywords
This publication has 26 references indexed in Scilit:
- Gear Tooth Surface Damage Fault Detection Using Induction Machine Stator Current Space Vector AnalysisIEEE Transactions on Industrial Electronics, 2014
- Side‐band algorithm for automatic wind turbine gearbox fault detection and diagnosisIET Renewable Power Generation, 2014
- Condition monitoring and fault diagnosis of planetary gearboxes: A reviewMeasurement, 2014
- Condition monitoring of gearboxes using synchronously averaged electric motor signalsMechanical Systems and Signal Processing, 2013
- Fault diagnosis of planetary gearboxes via torsional vibration signal analysisMechanical Systems and Signal Processing, 2013
- Gear and motor fault modeling and detection based on motor current analysisElectric Power Systems Research, 2013
- Dynamic analysis for a planetary gear with time-varying pressure angles and contact ratiosJournal of Sound and Vibration, 2012
- Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transformJournal of Sound and Vibration, 2008
- Condition Monitoring and Fault Diagnosis of Electrical Motors—A ReviewIEEE Transactions on Energy Conversion, 2005
- A New Method of Modeling Gear FaultsJournal of Mechanical Design, 1982