Effects of Different Relative Humidities on Flax Fibers prior to Manufacturing Their Composites Based on the Shear Response
Open Access
- 1 January 2020
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2020 (1)
Abstract
The moisture absorption behavior of flax fiber‐reinforced epoxy composites is deliberated to be a serious issue. This property restricts their usage as outdoor engineering structures. Therefore, this study provides an investigation of moisture in flax fibers on the performance of the flax/epoxy composite materials based on their shear responses. The ±45° aligned flax fibers exposed to different relative humidities (RH) and the vacuum infusion process was used to manufacture the composite specimens. The optimum shear strength (40.25 ± 0.75 MPa) was found for the composites manufactured with 35% RH‐conditioned flax fibers, but the shear modulus was reduced consistently with increasing RH values. Although shear strength was increased because of fiber swelling with increased moisture absorption rate until 35% RH environments with good microstructures, nonetheless, strength and modulus both started to decrease after this range. A very poor microstructure has been affirmed by the SEM images of the composite samples conditioned at 90% RH environments.Keywords
Funding Information
- Griffith University
This publication has 20 references indexed in Scilit:
- Flax fiber and its composites: An overview of water and moisture absorption impact on their performanceJournal of Reinforced Plastics and Composites, 2018
- Effect of water ageing on the load-unload cyclic behaviour of flax fibre-reinforced thermoplastic and thermosetting compositesComposite Structures, 2018
- Effect of geometric dimensions and fibre orientation on 3D moisture diffusion in flax fibre reinforced thermoplastic and thermosetting compositesComposites Part A: Applied Science and Manufacturing, 2017
- Effect of water ageing on the mechanical and damping properties of flax-fibre reinforced composite materialsComposite Structures, 2016
- Effects of water absorption on Napier grass fibre/polyester compositesComposite Structures, 2016
- Polymer reinforced by flax fibres as a viscoelastoplastic materialComposite Structures, 2014
- Wood versus Plant Fibers: Similarities and Differences in Composite ApplicationsAdvances in Materials Science and Engineering, 2013
- Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax–fibres and glass–fibresMaterials & Design (1980-2015), 2011
- Effect of chemical treatments on water sorption and mechanical properties of flax fibresBioresource Technology, 2009
- Thermal properties of high density polyethylene composites with natural fibres: Coupling agent effectPolymer Degradation and Stability, 2008