Microstructure Scale Lithium-Ion Battery Modeling, Part IV: The Representativity of Microstructure Parameters and Electrochemical Response
Open Access
- 10 July 2025
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (7)
Abstract
Lithium-ion battery electrochemical models require an accurate description of the electrodes microstructures to be predictive, that can be achieved through nanoscale imaging. Such observations are however limited by their field of view (FOV), as they provide only a subset of the whole electrode volume that does not necessarily represent the whole electrode microstructure heterogeneity, and therefore can bias the analysis. A representativity analysis has been performed on the microstructure parameters and, in a novel way, on the full cell electrochemical response to evaluate the predictions representativeness, and thus relevance, of a microstructure scale electrochemical model. The microstructure parameter deviation propagations to the electrochemical response have been quantified for different charge rates. This defines a threshold for the microstructure parameters FOV for a desired maximum deviation of the electrochemical response. Electrochemical model shows cell representative section areas are increasing with C-rate, due to higher in-plane heterogeneities, indicating larger FOVs are required specifically for fast charge modeling. Representativity analysis determines a cell FOV of 144.4×154.4 µm2 is large enough to establish a convergence on the representative section areas for low-intermediate C-rate (≤2.5C), therefore positively concludes on the model representativeness for these rates, but is not large enough to conclude for higher rates.Keywords
Funding Information
- Transportation Technologies Office (DE-AC36–08GO28308)
This publication has 31 references indexed in Scilit:
- A Segregated Approach for Modeling the Electrochemistry in the 3-D Microstructure of Li-Ion Batteries and Its Acceleration Using Block PreconditionersJournal of Scientific Computing, 2021
- Electrode scale and electrolyte transport effects on extreme fast charging of lithium-ion cellsElectrochimica Acta, 2020
- Heterogeneous damage in Li-ion batteries: Experimental analysis and theoretical modelingJournal of the Mechanics and Physics of Solids, 2019
- Evaluation of electrochemical models based battery state-of-charge estimation approaches for electric vehiclesApplied Energy, 2017
- Three‐Phase Multiscale Modeling of a LiCoO2 Cathode: Combining the Advantages of FIB–SEM Imaging and X‐Ray TomographyAdvanced Energy Materials, 2014
- A Computational Model of the Mechanical Behavior within Reconstructed LixCoO2 Li-ion Battery Cathode ParticlesElectrochimica Acta, 2014
- Three-dimensional electrochemical Li-ion battery modelling featuring a focused ion-beam/scanning electron microscopy based three-phase reconstruction of a LiCoO2 cathodeElectrochimica Acta, 2014
- Effects of three-dimensional cathode microstructure on the performance of lithium-ion battery cathodesElectrochimica Acta, 2013
- A new approach to modelling the effective thermal conductivity of heterogeneous materialsInternational Journal of Heat and Mass Transfer, 2006
- The use of mathematical modeling in the design of lithium/polymer battery systemsElectrochimica Acta, 1995