FUFrançois Laurent Emilien Usseglio-Viretta

François Laurent Emilien Usseglio-Viretta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


François Laurent Emilien Usseglio-Viretta has a total of 123 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Deciphering the conflict between ion and electron percolating networks in solid-state battery cathodes

    by Nicholas McKalip, Kaustubh G. Naik, Maxwell C. Schulze, Renae N. Gannon, Ryan J. Tancin, Francois L. E. Usseglio-Viretta, Avtar Singh, Paul Gasper, Corey R. Randall, Donal P. Finegan, et al.

    High energy/power density solid state batteries require composite cathode optimization. This study reveals optimal electronic/ionic percolation with carbon fibers happens at lower mass ratios (3–5 wt %) compared to particulate carbon (>5 wt %).

  • Optimisation des performances et de la robustesse d’un électrolyseur à hautes températures

    by François Usseglio-Viretta

    La réponse thermique, électrochimique et mécanique d'un électrolyseur de la vapeur d'eau à haute température (EVHT) a été analysée dans ce travail. Pour ce faire, une approche de modélisation multi-physique et multi-échelle a été employée : • Un modèle local, à l'échelle de la microstructure des électrodes, a été utilisé pour analyser le comportement électrochimique apparent des électrodes de la cellule d'électrolyse étudiée. Le fonctionnement du système au sein d'un empilement de plusieurs cellules a ensuite été analysé grâce à un modèle thermoélectrochimique à l'échelle macroscopique de l'EVHT. Un élément de validation expérimentale du modèle accompagne les résultats. • Un modèle thermomécanique pour le calcul de l'état de contrainte de l'EVHT a été développé. Celui-ci tient compte des phénomènes physiques intrinsèques à la cellule et à son fonctionnement sous courant à hautes températures et à ceux imputables aux interactions mécaniques entre la cellule et son environnement. Les données manquantes nécessaires à l'exécution des modèles ont été obtenues par la caractérisation et par des calculs d'homogénéisation de la microstructure tridimensionnelle des électrodes. Par ailleurs le comportement viscoplastique du matériau de la cathode a été mis évidence par des essais de fluage en flexion quatre points. L'étude a permis de définir un domaine de fonctionnement optimal garantissant des performances électrochimiques élevées avec des niveaux de température acceptables. Des propositions visant à réduire l'endommagement mécanique du système ont également été produites.

  • Open Access

    Electrode wetting dynamics: simulating the impact of electrolyte filling conditions on lithium-ion cell performance

    by François L. E. Usseglio-Viretta, Rafael Salazar-Tio, Ganapathi R. Balasubramanian, Corey R. Randall, Peter J. Weddle, Andrew M. Colclasure, Donal P. Finegan

    Multiscale electrolyte infiltration model applied to a lithium-ion battery electrode microstructure digital twin to quantify the impact of residual air pockets on cell performance and identify filling conditions to maximize electrode wetting.

  • Open Access

    Microstructure Scale Lithium-Ion Battery Modeling: Part II. On In-Plane Heterogeneities and the Mechanisms that Regulate Them

    by Francois L. E. Usseglio-Viretta, Andrew M. Colclasure, Jeffery Allen, Peter J. Weddle, Donal P. Finegan, Peter Graf, Kandler Smith

    Li-ion batteries performance and degradation are typically modeled at the macroscopic scale, that is neglecting in-plane heterogeneities that can arise from non-uniform electrode microstructures. Herein, a microstructure scale electrochemical model is used to quantify the impact of microstructure heterogeneity on cell performance during fast charging. The model predicts the electrolyte and solid concentration in-plane standard deviation can reach, respectively, ≈200 mol·m−3 and 6–7 kmol·m−3 locally. Further, the intercalation current density in-plane relative standard deviation can reach extremely high values, around 100% in the cathode and well above 100% in the anode graphite. These denote highly non-uniform lithiation rates and material utilization within each slice of the microstructure along the cell thickness. Non-uniform curvatures, at the particle scale (surface roughness) and between particles (size distribution), were found to initiate these in-plane heterogeneities, while an OCP-induced mechanism subsequently regulates them. The present model provides new insights into small length scale heterogeneity impact on battery performance not available with standard macro-scale/P2D modeling.


  • Open Access

    Microstructure Scale Lithium-Ion Battery Modeling: Part III. When and Where Lithium Plating Occurs and its Correlation with the Electrode Microstructure

    by Francois L. E. Usseglio-Viretta, Andrew M. Colclasure, Jeffery Allen, Peter J. Weddle, Donal P. Finegan, Peter Graf, Kandler Smith

    Li-ion battery performance and degradation are closely related to the cell’s underlying electrode microstructure. Electrode microstructures are typically characterized with volume-averaged properties that neglect the impact of local heterogeneities. However, local heterogeneities create hot spots that can trigger degradation onset. Herein, a microstructure scale electrochemical model is used to investigate the impact of microstructure heterogeneity on lithium plating. The model predicts lithium plating is not uniform, even when considering a relatively small portion of the electrode (a cross-sectional area of 154×144 µm2), preferring to plate on larger particles as compared to smaller particles. While local heterogeneities control where plating occurs, the model predicts that volume-averaged properties control when plating occurs. Additionally, the model predicts that the active material specific surface area has a linear relationship with the plating onset. However, the linear relationship between increased active material surface area and delayed plating response appears to be sensitive to the microstructure feature used to increase the active interface area. Here, a comparative case-study is explored where the specific surface area is increased by either reducing the active material particle diameter, adding open-porosity cracks, or increasing the active material surface roughness. The model predicts that increasing the specific surface area by reducing the active material particle diameter is the most effective strategy for delaying lithium plating. At 6C, reducing particle size is shown to be 3 and 20 times more effective than, respectively, adding open-porosity cracks and increasing surface roughness. A dual-layer electrode architecture combining gradations both for average properties and uniformities is eventually proposed to improve homogeneous material utilization and reduce degradation at high charge rates.


  • Open Access

    Maximizing calendering effects through the mechanical pulverization of Co-free nickel-rich cathodes in lithium-ion cells

    by Alexis Luglio, Kae Fink, Francois Usseglio-Viretta, Andrew Colclasure, Patrick Walker, John S. Mangum, Ryan Brow

    Calendering is a technique used to maximize the volumetric energy density of battery electrodes. However, higher amounts of calendering result in increased tortuosity and particle cracking. We propose a novel packing structure of electrode particles to maximize calendering benefits while minimizing particle fracture. Cobalt-free layered oxide cathode LiNi0.92Mn0.04Al0.04O2 (NMA) particles are pulverized through ball-milling and coated with lithium phosphate. Pulverized and pristine NMA are fabricated into “bimodal” electrodes, whereas “unimodal” electrodes consist of only pristine NMA. Each electrode type was made into 30% porosity, 40% porosity, and uncalendered coin cell samples. X-ray diffraction suggests that the unimodal samples suffer from more particle fracture than the bimodal samples when calendered to the same porosity of 30%. Electrochemical impedance spectroscopy suggests that the bimodal electrodes exhibit lower surface film resistance. This is supported by enhanced capacity retention for the bimodal samples after 100 cycles. Graphical Impact statement: Calendering is an essential manufacturing process for Li-ion batteries (LIBs). Despite calendering increasing the energy density of electrodes and improving ionic and electronic connections, it also enhances particle cracking and hinders Li-ion migration. In this article, we investigate a novel “bimodal” packing configuration of a Co-free cathode material and analyze the configuration’s impact on particle cracking at different levels of calendering. There is an increasing effort to eliminate Co in LIB cathode materials due to its expensive and controversial mining conditions. Through electrochemical and structural characterization techniques, we probe particle cracking at different levels of calendering in bimodal and control electrodes. We report the ability of our bimodal configuration to decrease particle cracking and enhance capacity retention. We believe this work is highly impactful because it suggests a direct application to manufacture design of next-generation, Co-free cathodes which have accelerated intragranular cracking compared to current LIB cathodes.


  • Open Access

    Microstructure Scale Lithium-Ion Battery Modeling, Part IV: The Representativity of Microstructure Parameters and Electrochemical Response

    by François Laurent Emilien Usseglio-Viretta, Andrew M. Colclasure, Jeffery Allen, Peter Weddle, Donal Finegan, Peter Graf, Kandler Smith

    Lithium-ion battery electrochemical models require an accurate description of the electrodes microstructures to be predictive, that can be achieved through nanoscale imaging. Such observations are however limited by their field of view (FOV), as they provide only a subset of the whole electrode volume that does not necessarily represent the whole electrode microstructure heterogeneity, and therefore can bias the analysis. A representativity analysis has been performed on the microstructure parameters and, in a novel way, on the full cell electrochemical response to evaluate the predictions representativeness, and thus relevance, of a microstructure scale electrochemical model. The microstructure parameter deviation propagations to the electrochemical response have been quantified for different charge rates. This defines a threshold for the microstructure parameters FOV for a desired maximum deviation of the electrochemical response. Electrochemical model shows cell representative section areas are increasing with C-rate, due to higher in-plane heterogeneities, indicating larger FOVs are required specifically for fast charge modeling. Representativity analysis determines a cell FOV of 144.4×154.4 µm2 is large enough to establish a convergence on the representative section areas for low-intermediate C-rate (≤2.5C), therefore positively concludes on the model representativeness for these rates, but is not large enough to conclude for higher rates.


  • Open Access

    Microstructure Scale Lithium-Ion Battery Modeling: Part I. On Through-Plane Heterogeneity, Impact of Mesh Representation, and Differences between Macro- and Microscale Models

    by Francois L. E. Usseglio-Viretta, Andrew M. Colclasure, Jeffery Allen, Peter J. Weddle, Donal P. Finegan, Peter Graf, Kandler Smith

    Li-ion battery performance and degradation are strongly correlated with the electrode microstructures and can be modeled at different scales, each with their own limitations. Herein, we compare predictions achieved with a macro- and a micro-scale model, that is, respectively, neglecting or considering the microstructural heterogeneity of the composite electrodes, on virtual numerically generated and real microstructures. While both models are in relative agreement at the low charge rates, differences arise for fast charging scenarios and especially for the real, highly heterogenous, microstructures. The microscale model predicts that electrolyte concentration saturation and depletion, respectively, at the back of the cathode and of the anode are exacerbated, and that lithium plating occurs earlier for real microstructures. The present work also indicates that the mesh representation significantly impacts the microscale model predictions, and consequently that microscale models should add surface area as a parameter to consider explicitly surface roughness. This article is the first of a series, with subsequent entries further investigating in-plane heterogeneities, lithium plating, and the impact of microstructure representativity on model predictions.


  • Open Access

    Concavity-based local erosion and sphere-size-based local dilation applied to lithium-ion battery electrode microstructures for particle identification

    by Francois L.E. Usseglio-Viretta, Paul Gasper, Nina Prakash, Melissa Popeil, Kandler Smith, Donal P. Finegan