Research on Detection Method of Aircraft Riveting Hole Defects Based on Planar Remote Field Eddy Current

Authors:

Abstract
To address the issues of low efficiency, strong interference signals, and insufficient sensitivity in detecting defects around aircraft rivet holes, this paper proposes a novel rapid detection sensor based on planar remote field eddy current (RFEC) technology. By employing a dual excitation coil structure with reverse winding and a multi-detection coil array design, the sensor effectively suppresses interference signals from the rivet itself while enhancing detection capability for cracks near the hole edges. COMSOL simulations and experimental validation were combined to optimize the excitation coil parameters (inner diameter of 4.5 mm, height of 3 mm, and spacing of 1 mm), significantly improving magnetic field penetration and detection sensitivity. The study reveals that as the defect length increases, the amplitude of the detection signal rises markedly while the phase remains stable. With increasing defect depth, the amplitude exhibits nonlinear attenuation, whereas the phase monotonically decreases. Variations in defect angle result in a single-peak amplitude response, with peak positions correlated to the angle. Experimental results demonstrate that the designed sensor can effectively detect defects near rivet holes with length × width × depth of 5 mm × 0.2 mm × 3 mm under the buried depth of 5 mm. This work provides theoretical and technical support for the rapid non-destructive testing (NDT) of aircraft riveted structures.
Funding Information
  • Natural Science Foundation of Jiangxi Province of China (20242BAB20210)

This publication has 23 references indexed in Scilit: