Study on the fabrication and heat treatment of the sheet material of in situ TiBw/Ti60 composites

Authors:

Abstract
5 vol.% TiB whiskers (TiBw) reinforced Ti60 composites (TiBw/Ti60) with a novel network microstructure have been successfully fabricated by reaction hot pressing, and then the composite sheets can be obtained by subsequently rolling deformation at 1040 °C. In order to further improve a combination of properties of the composite sheets, the as‐rolled composite sheets have been heat treated by different parameters. The results show that the matrix of the as‐sintered TiBw/Ti60 composite exhibits platelet or equiaxed alpha phase and intergranular beta phase, and the ultimate strength of the composite is significantly improved compared with that of the monolithic Ti60 alloy. However, undergoing rolling deformation and solution treatment, the alpha phase in the matrix becomes fine and equiaxed, and the ultimate strength of the composites is significantly increased to 1379 MPa along with 4.1% of elongation. In addition, a superior combination of properties can be achieved by the heat treatment of 950 °C / 0.5 h / WQ + 500 °C / 2 h / AC.

This publication has 16 references indexed in Scilit: