Abstract
The growing use of binder jetting in foundry practice creates a need for effective recovery of the fine silica sand used in additively manufactured molds. This study compares mechanical and thermal reclamation of spent furfuryl-resin sands originating from binder-jetted molds (US-1) and conventionally manufactured molds (US-2) after ductile iron casting. Mechanical reclamation was conducted at rotor speeds of 280–560 rpm for 10–30 min, whereas thermal reclamation was performed at 600–1000 °C. Reclaim quality was assessed using loss on ignition (LOI), pH, dust generation, grain morphology, and bending strength. Conventional spent sand was more susceptible to mechanical treatment, reaching a maximum reclamation efficiency index of 41.1%, compared with 31.5% for binder-jetted sand. Thermal treatment was markedly more effective, reducing LOI to 0.14% for US-1 and 0.29% for US-2 and increasing reclamation efficiency to 94.8% and 89.8%, respectively. High-temperature thermal reclamation is therefore particularly suitable for fine-grained binder-jetted sand, whereas excessive mechanical treatment may promote grain crushing and dust formation.

This publication has 17 references indexed in Scilit: