Research on Optimization Design of Geometric Parameters of a Novel Frame-Embedded Track (NFET)
Open Access
- 16 October 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (20) , 10441
Abstract
A novel frame-embedded track (NFET) with additional beams between the prefabricated rail seats before was proposed, but its geometric parameters need to be further optimized, in order to solve the problem of difficulty in adjustment, due to the independence of the two prefabricated rail seats during the construction of tram. Based on the finite element method, the geometric parameters of the NFET structure are systematically studied and optimized. The research shows: (1) As the width of the beams and the thickness of the lower slab increases, the mechanical characteristics of the NFET structure does not change significantly; therefore, the recommended design reference value for these two are 240 and 80 mm, respectively. (2) When considering the cable and the drainage facilities, the stress state of the NFET structure is less affected (or even improved), which proves that the layout of the cable and the drainage facilities is feasible. (3) According to the analysis during different construction stages, the stress of the NFET rail seats is generally greater than the stress of the cast-in-place concrete. It is recommended that the intensity of the cast-in-place concrete should be greater than that of the prefabricated frame structure.Keywords
Funding Information
- Natural Science Foundation of Hainan Province (2019JJ40384)
- Science and Technology Development Plan Project of China Railway Bureau 14 Group (YGDC-30)
This publication has 18 references indexed in Scilit:
- Viscoelastic deformation behavior of cement and emulsified asphalt mortar in China railway track system I prefabricated slab trackJournal of Zhejiang University-SCIENCE A, 2020
- Dynamic Analysis of Tram Vehicles Coupled With the Track System Based on Staggered Iterative AlgorithmJournal of Computational and Nonlinear Dynamics, 2020
- High Frequency Vibrations Arising in System Wheel-Rail. Part I. Mathematical Modeling of the Distribution Stress in Contact Zone Wheel-RailIOP Conference Series: Earth and Environmental Science, 2020
- A time-based track quality index: Melbourne tram case studyInternational Journal of Rail Transportation, 2019
- Effect of daily changing temperature on the curling behavior and interface stress of slab track in construction stageConstruction and Building Materials, 2018
- Low-maintenance green tram tracks as a socially acceptable solution to greening a cityUrban Forestry & Urban Greening, 2018
- Full-scale field experimental investigation on the interfacial shear capacity of continuous slab track structureArchives of Civil and Mechanical Engineering, 2016
- The Effect of Rail Fastening System Modifications on Tram Traffic Noise and VibrationShock and Vibration, 2016
- Interface damage and its effect on vibrations of slab track under temperature and vehicle dynamic loadsInternational Journal of Non-Linear Mechanics, 2014
- Noise and vibrations at tram track intersectionThe Journal of the Acoustical Society of America, 2008