Salinity Effect in Seawater Thermoelastohydrodynamic Lubrication of Double Spiral Groove Face Seals
Open Access
Abstract
A rise in seawater salinity results in an increase in its viscosity, which presents a coupled influence on the distribution of fluid pressure, temperature and deformation at the sealing face, leading to fluctuations in sealing performance and forming the salinity effect in seawater thermoelastohydrodynamic lubrication (TEHL). Here, for a double spiral groove face seal, a TEHL model is established and numerical analysis is carried out, taking account of the salinity effect and cavitation effect, with the aim to ensure that the seal maintains stable performance under varying conditions of sea depth and speed. It is found that the effect of salinity on the opening force and leakage rate exhibits obvious nonlinear variations. As salinity rises from 0 to the standard 35 g/kg, the opening force changes by about 5%, and there is a transition between forward and reverse leakage, with variations of approximately ±100%. More importantly, the double spiral grooves offer the potential for a zero-leakage design in seawater face seals, even under pressures exceeding 4 MPa, through precise design. Additionally, the double spiral groove face seal shows excellent adaptability under multipoint conditions and can facilitate a zero-leakage design in varying pressure, speed and temperature conditions. This provides theoretical support for deep-sea equipment and applications in other extreme environments.Keywords
This publication has 28 references indexed in Scilit:
- Lubrication heating behavior of elliptical groove face seals under multi-point conditionsInternational Journal of Heat and Fluid Flow, 2024
- Thermal-liquid–solid coupling characteristics of wavy-end-face mechanical seal for reactor coolant pumpNuclear Engineering and Design, 2023
- Verification at Mach 4 heat conditions of an annular microtube-typed precooler for hypersonic precooled enginesApplied Thermal Engineering, 2022
- Thermodynamic analysis of key parameters on the performance of air breathing pre-cooled engineApplied Thermal Engineering, 2022
- A thermo-elasto-hydrodynamic lubrication modeling approach to the operation of reactor coolant pump sealsTribology International, 2019
- Bi-directional integral pumping devices for dual mechanical seals: Influence of mesh type on accuracy of numerical simulationsAlexandria Engineering Journal, 2018
- Simulation of a hydraulically controllable reactor coolant pump sealTribology International, 2018
- The influence of real gas effects on the performance of supercritical CO 2 dry gas sealsTribology International, 2016
- Development of the turbomachinery for the supercritical carbon dioxide power cycleInternational Journal of Energy Research, 2015
- Thermal performance of mechanical seals with textured side-wallTribology International, 2012