Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jing Yang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Salinity Effect in Seawater Thermoelastohydrodynamic Lubrication of Double Spiral Groove Face Seals

    by Shaoxian Bai, Demin Yang, Jing Yang

    A rise in seawater salinity results in an increase in its viscosity, which presents a coupled influence on the distribution of fluid pressure, temperature and deformation at the sealing face, leading to fluctuations in sealing performance and forming the salinity effect in seawater thermoelastohydrodynamic lubrication (TEHL). Here, for a double spiral groove face seal, a TEHL model is established and numerical analysis is carried out, taking account of the salinity effect and cavitation effect, with the aim to ensure that the seal maintains stable performance under varying conditions of sea depth and speed. It is found that the effect of salinity on the opening force and leakage rate exhibits obvious nonlinear variations. As salinity rises from 0 to the standard 35 g/kg, the opening force changes by about 5%, and there is a transition between forward and reverse leakage, with variations of approximately ±100%. More importantly, the double spiral grooves offer the potential for a zero-leakage design in seawater face seals, even under pressures exceeding 4 MPa, through precise design. Additionally, the double spiral groove face seal shows excellent adaptability under multipoint conditions and can facilitate a zero-leakage design in varying pressure, speed and temperature conditions. This provides theoretical support for deep-sea equipment and applications in other extreme environments.


  • Open Access

    An Experimental and Theoretical Analysis of Upstream Pumping Effect of Deep Spiral Grooves on Mechanical Face Seals

    by Shaoxian Bai, Jiaqi Liu, Jing Yang

    The upstream pumping effect of mechanical face seals has a significant influence on their sealing performance. In order to reveal the effect of deep grooves on upstream pumping effects, an experimental and theoretical analysis is carried out in this study. The main novelty of this paper is to analyze the feasibility of deep grooves in a mechanical seal design from the perspective of cavitation and leakage rate. Firstly, an upstream pumping spiral groove is designed and fabricated, with different groove depths from 2 μm to 90 μm. Then, testing is performed with water as the sealing medium. Finally, the cavitation phenomena are captured, and leakage rates are measured during the experiment. The obtained results show that the groove with a depth of tens of microns can be designed according to the laminar flow hypothesis, and Reynolds equation is still valid to predict the cavitation and leakage rate theoretically. The spiral groove with a depth of tens of microns shows a significant upstream pumping effect. Both the theoretical and experimental analyses show that under certain working conditions, deep grooves can realize the zero-leakage sealing design of liquid, which might provide significant guidance for the sealing design of mechanical face seals to enhance sealing performance.


  • Open Access

    Analysis of Thermoelastic Contact of Gas-Lubricated Rough Sealing Faces

    by Shaoxian Bai, Yangyang Chen, Jing Yang

    Friction and wear are the main failure sources of face seals. When the surfaces of sealing rings exhibit greater roughness, the level of friction might increase and lead to sealing failure. Therefore, in this paper, based on the elastic contact hypothesis of rough and wavy surfaces and the influence of temperature on the elastic modulus of materials, a thermoelastic contact lubrication model of a gas-lubricated end seal is established. The novelty and advantage of this study is that it takes the effect of surface roughness into consideration during thermoelastic analysis of gas-lubricated seals. The film pressure, temperature, contact force and deformation of a gas spiral groove-faced seal are numerically determined. The influence of surface roughness on the contact distribution, deformation and temperature of the end-face seal at different speeds and pressures is analyzed. The film thickness increases as the rotational speed increases from 1 rpm to 2000 rpm, while the contact pressure sharply decreases from 0.25 kPa to 0. The analysis shows that the roughness contact mainly happens on the inner side of the rings due to convergent distortion of the seal faces, which easily causes partial wear of the seal faces. Moreover, it can also be found that the spiral grooves on the sealing surface can produce obvious hydrodynamic pressure effect due to the function of shear speed when the speed increases to 2000 rpm, while the film temperature increases from 293.3 K to about 306 K. The greater surface roughness results in a larger temperature rise under low-rotational-speed and lower-seal-pressure conditions, which further increases the risk of severe wear or even failure of the seal faces.


  • Open Access

    An Experiment on the Dwell Time Effect of Rubber Seal O-Rings: Friction Force in Intermittent Reciprocating Motion

    by Shaoxian Bai, Tao Wang, Jing Yang

    The adhesive force between two contact surfaces often leads to an increase in the friction force of the rubber seal O-ring after a certain dwell time, forming dwell time effects and affecting the reliability of sealing. The dwell time effect may result in substantial instability with respect to the frictional behavior of rubber O-rings, which needs to be carefully taken into account in the design of rubber seals. Therefore, in this paper, the dwell time effect of the friction force was studied experimentally for intermittent reciprocating rubber seal O-rings coupled with stainless steel 316L and a sealing air medium. The friction force of three kinds of rubber materials, including fluorine rubber (FPM), silicone rubber (SI), and nitrile rubber (NBR), was measured under different dwell times, compression ratios, and seal pressure. The results showed that there was a rolling frictional force, and the second peak value of the frictional force caused by the O-ring’s rolling under shear action and after the maximum static frictional force was observed at the starting stage of reciprocating motion. For FPM O-rings, the rolling friction force was much greater than the maximum static frictional force at about four times the value of the compression ratio at 9% and seal pressure at 0; moreover, the force was much greater at greater compression ratios. The dwell time effect was significant in the friction forces of rubber O-rings. The friction force increases with an increase in dwell time. The increase in maximum static friction force exceeded 50% after 5 dwell days. The increase in seal pressure led to the disappearance of the rolling friction feature and the rapid increase in friction during the starting stage. Under gas seal pressure conditions, the dwell time effect still led to a significant increase in friction force. The obtained results might provide guidance for the material selection of sealing designs.


  • Open Access

    Vaporization Phase Transition in Cryogenic Liquid Oxygen Sealing Film on Spiral Groove Faces

    by Junjie Chen, Chunhong Ma, Shaoxian Bai, Jing Yang

    The property of vaporization phase transition in liquid oxygen face seals is a key factor affecting the stability of mechanical face seals in many fields, especially under cryogenic conditions. Here, a numerical model based on the saturated vapor pressure is established to investigate the vaporization phase transition property of liquid oxygen sealing film. The novelty of this model is to take the influence of heat transfer and face distortions into consideration at the same time. The pressure and temperature distributions as well as face distortions are calculated, and then the property of vaporization phase transition and sealing performance are analyzed. It is found that spiral grooves may lead to the complex film temperature distributions and irregular vaporization distributions. With the increase in seal temperature and decrease in seal pressure, the vaporization area extends from the low-pressure side to the grooves area, and the vaporization rate increases rapidly. The more important thing is that the vaporization often brings a drastic fluctuation and non-monotonic change in opening force. Specifically, with the increase inin seal temperature from 55 K to 140 K, the opening force fluctuates violently, and the fluctuation range is more than 50%, showing an obvious instability. Finally, this study provides a design range of pressure and temperature values for liquid oxygen face seals. In these ranges, this kind of face seals can have a stable operation, which is beneficial to the practice engineering related to the complex properties of sealing fluid.


  • Open Access

    High-Temperature Flow Behavior and Energy Consumption of Supercritical CO2 Sealing Film Influenced by Different Surface Grooves

    by Jing Yang, Shuaiyu Wang, Shaoxian Bai

    The Brayton cycle system, as a closed cycle working under high-temperature, high-pressure and high-speed conditions, presents significant prospects in many fields. However, the flow behavior and energy efficiency of supercritical CO2 is severely influenced by the structures of face seals and the sealing temperature, especially when the sealing gas experiment is the supercritical transformation process. Therefore, a numerical model was established to investigate the high-temperature flow behavior and energy consumption of face seals with different surface grooves. The effects of the operation parameters and groove structure on the temperature distribution and sealing performance are further studied. The obtained results show that the supercritical effect of the gas film has a more obvious influence on the flow velocity uθ than ur. Moreover, it can be found that the temperature distribution, heat dissipation and leakage rate of the gas face seals present a dramatic change when the working condition exceeds the supercritical point. For the spiral groove, the change rate of heat dissipation becomes larger, from 3.6% to 8.1%, with the increase in sealing pressure from 15 to 50 MPa, when the temperature grows from 300 to 320 K. Meanwhile, the open force maintains a stable state with the increasing temperature and pressure even at the supercritical point. The proposed model could provide a theoretical basis for seal design with different grooves on the supercritical change range in the future.

  • Open Access

    Thermo-Hydrodynamic Lubricating Behaviors of Upstream Liquid Face Seals with Ellipse Dimples

    by Shaoxian Bai, Kaixin Li, Jing Yang, Shiyi Bao, Chunhong Ma

    In order to obtain the leakage characteristics of an upstream pumping face seal with inclined ellipse dimples under high-temperature and high-speed liquid lubricating conditions, a thermo-hydrodynamic lubricating model is developed. The novelty of this model is that it takes the thermo-viscosity effect and cavitation effect into account. The influence of operating parameters, such as rotational speed, seal clearance, seal pressure, ambient temperature and structural parameters, such as dimple depth, inclination angle, slender ratio and dimple number on the opening force and leakage rate, is numerically calculated. The results obtained show that the thermo-viscosity effect makes the cavitation intensity decrease noticeably, leading to an increase in the upstream pumping effect of ellipse dimples. Moreover, the thermo-viscosity effect may make both the upstream pumping leakage rate and opening force increase by about 10%. It can also be found that the inclined ellipse dimples can produce an obvious upstream pumping effect and hydrodynamic effect. Based on the reasonable design of the dimple parameter, not only can the sealed medium achieve zero leakage, but the opening force can also increase by more than 50%. The proposed model has the potential to provide the theoretical basis for and guide the future designs of upstreaming liquid face seals.


  • Open Access

    Thermo-Hydrodynamic Effect of Gas Split Floating Ring Seal with Rayleigh Step Grooves

    by Shaoxian Bai, Dongdong Chu, Chunhong Ma, Jing Yang, Shiyi Bao

    The force equilibrium and moment equilibrium play a significant role on the sealing performance of gas split floating ring seals. A small deflection angle may generate seriously wear on sealing surface and cause seal failure. Therefore, the thermo-hydrodynamic lubrication analysis of gas split floating ring seal with Rayleigh grooves is investigated considering the deflection angle and frictional heat of surface contact, which is beneficial to grasp the hydrodynamic characteristics and rules under high-temperature and high-speed conditions. Pressure and temperature distributions of sealing rings are numerically calculated for the cases with different deflection angle, rational speed, seal pressure and ambient temperature. Then, the hydrodynamic effect and sealing performance are analyzed. The obtained results show that, the surface Rayleigh step grooves do not present obvious hydrodynamic effect when split seal ring has no deflection. While, a significant hydrodynamic effect can be obtained when the split seal ring presents a deflection angle about dozens of micro radians. Here, a 10% increase of opening force is achieved when the deflection angle reaches 80 μrad in the case of speed 30,000 r/min and seal pressure 0.2 MPa. Moreover, the hydrodynamic effect becomes obvious with increasing deflection angle as well as rotational speed. Meanwhile, the growth of rotational speed results in an obvious increase of film temperature. The increase of ambient temperature has a significant influence on the decrease of leakage rate. When the ambient temperature increases from 340 K to 540 K, the leakage rate reduces exceeding 50%, however, it does not present obvious effect on the opening force. The proposed model has the potential to provide the theoretical basis and design guidance for surface grooves of gas split floating ring seal in the future.


  • Open Access

    Electrostatic Analysis of Bioactivity of Ti-6Al-4V Hydrophilic Surface with Laser Textured Micro-Square Convexes

    by Si Li, Yangyang Jin, Shaoxian Bai, Jing Yang

    At solid-liquid interfaces, charged particles within the electric double layer (EDL) are acted on by the electrostatic force, which may affect cell absorption and surface wettability. In this study, a model of the electrostatic force and surface tension of textured surfaces was presented. Then, the growth and adhesion of Murine osteoblasts (MC3T3-E1) cells on laser-ablated micro-square-textured Ti-6Al-4V surfaces were studied to demonstrate the use of a laser-processed texture to effectively improve bioactivity. Three different micro-square-textured hydrophilic surfaces, presenting lower contact angles of 19°, 22.5°, and 31.75° compared with that of a smooth surface (56.5°), were fabricated using a fiber-optic laser. Cellular morphology and initial cell attachment were analyzed by field emission scanning electron microscopy (SEM) and fluorescence microscopy, respectively. The results show that the electrostatic force not only made the textured surface more hydrophilic but also made the cells tend to adhere to the edges and corners of the protruding convexes. Cell morphology analysis also showed that cells would prefer to grow at the edges and corners of each micro-square convex protrusion. The laser-treated surfaces were more conducive to rapid cell growth and adhesion, and cells were preferentially attached on the hydrophilic-textured surfaces. Electrostatic force may be an important factor in effectively improving the bioactivity of Ti-6Al-4V surfaces, and the presence of more surface grooves would be more conducive to improving the bioactivity of cells.


  • Open Access

    Gas–Liquid Mass Transfer Behavior of Upstream Pumping Mechanical Face Seals

    by Shaoxian Bai, Jialin Hao, Jing Yang, Yuansen Song

    For gas–liquid medium isolation seals in aero-engines, the upstream pumping function of directional grooves provides an effective way to realize the design of longer service life and lower leakage rate. However, this produces a new problem for gas–liquid mass transfer in the sealing clearance. This study establishes an analytical model to investigate the gas–liquid mass transfer behavior and the change rule for the opening force of mechanical face seals with elliptical grooves. Compared with traditional studies, this model considers not only the gas–liquid transfer but also the cavitation effect. The results obtained show that with the increase of rotational speed, the gas medium transferred from the inner low-pressure side to the outer high-pressure side. In addition, the leakage rate of the liquid medium from the outer high-pressure side to the inner low-pressure side increased with the growth of sealing clearance, rotational speed and seal pressure. The upstream pumping effect of the gas medium with elliptical grooves not only led to a state of gas–liquid mixed lubrication in the sealing surfaces, but also significantly increased the opening capacity of the seal face. This research may provide a reasonable basis for the design of upstream pumping mechanical face seals.