Wideband characterization of additively manufactured viscoelastic materials
Authors:
- Anne-Sophie PoudrelAPAnne-Sophie Poudrel
- Jorge PeixinhoJPJorge Peixinho
- Marc RébillatMRMarc Rébillat
- Giuseppe RosiGRGiuseppe Rosi
- Nicolas BochudNBNicolas Bochud
- Pierre MargeritPMPierre Margerit
Preprint
- 21 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
A unified framework dedicated to the characterization of viscoelastic materials over an extended range of frequencies is proposed. Three experimental methods are combined: (i) the Dynamic Mechanical Analysis associated with low frequencies; (ii) the ultrasound transmission technique allowing high frequency characterization; and (iii) the wavefield analysis bridging the medium frequency gap. The methodology is validated on quasi-homogeneous polymer composites obtained using multi-material additive manufacturing.As a result, the complete set of storage moduli and loss factors is provided from the quasi-static to the ultrasound regime, covering approximately 8 orders of magnitude in frequency (0.01 Hz -- 5 MHz). An extreme frequency-dependent behavior is observed for the softest material, with a storage modulus multiplied by nearly 1000 over the studied frequency spectrum and a loss factor reaching up to 100%. Unlike conventional approaches relying on the Time-Temperature-Superposition principle, this framework enables a direct estimation of the material behavior at the frequency of interest. This makes the proposed methodology an interesting candidate for the characterization of viscoelastic (meta-)materials with engineering applications spanning an extremely broad spectrum.Keywords
This publication has 20 references indexed in Scilit:
- Ultrasound monitoring of multiphase architectured media: Bandgap tracking via the measurement of the reflection coefficientApplied Acoustics, 2024
- Thorough ultrasonic rheology of soft, visco-elastic materials: Example of crosslinked Polyurethane elastomerUltrasonics, 2023
- Modelling the interphase of 3D printed photo-cured polymersComposites Part B: Engineering, 2022
- Prediction of polyurethane behaviour via time-temperature superposition: Meanings and limitationsPolymer Testing, 2020
- Application of Kramers–Kronig relations to time–temperature superposition for viscoelastic materialsMechanics of Materials, 2013
- High-resolution modal analysisJournal of Sound and Vibration, 2009
- Polymer Physics2003
- ESPRIT-estimation of signal parameters via rotational invariance techniquesIEEE Transactions on Acoustics, Speech, and Signal Processing, 1989
- Time ? Temperature superposition for thermorheologically complex materialsMechanics of Composite Materials, 1975
- The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming LiquidsJournal of the American Chemical Society, 1955