FAILURE ANALYSIS OF A BASE SUPPORT PLATE OF A SEMOLINA PURIFIER MACHINES SUBJECTED TO FATIGUE LOADING
Open Access
- 12 December 2023
- journal article
- research article
- Published by Konya Muhendislik Bilimleri Dergisi in Konya Journal of Engineering Sciences
- Vol. 12 (1) , 22-36
Abstract
The semolina purifier is a machine used in the production phase in flour factories and is exposed to fatigue loads. In this study, the reason for the damage when a semolina purifier machine breaks during use and the improvements that need to be made in the design are discussed. For this purpose, a finite element model (FEM) was created using ABAQUS software. As a result of the analysis, it was determined that the design of the machine support platform should be improved. A two-stage strengthening alternative is designed. The cyclic loads applied by the twin motors that move the machine screens are applied in the FEM model. The deformations and stresses occurring in the reinforced and existing design machine base plate were compared. The results showed that, the maximum equivalent stress level can be reduced from 86 MPa to 35 MPa by design improvements made on the base plate.Keywords
This publication has 24 references indexed in Scilit:
- Energy-based ductile failure predictions in cracked friction-stir welded jointsEngineering Failure Analysis, 2019
- Fatigue failure analysis of roll steel pins from a chain assembly: Fracture mechanism and numerical modelingEngineering Failure Analysis, 2019
- Failure of the bucket wheel excavator bucketsEngineering Failure Analysis, 2018
- Potential failure cause analysis of tungsten carbide end mills for titanium alloy machiningEngineering Failure Analysis, 2016
- Failure analysis of a machine support for fique fibre processingEngineering Failure Analysis, 2015
- Micro-cracks on electro-discharge machined surface and the fatigue failure of a diesel engine injectorEngineering Failure Analysis, 2013
- Failure analysis and effects of redesign of a polypropylene yarn twisting machineEngineering Failure Analysis, 2011
- Study of the failure of one machining toolEngineering Failure Analysis, 2010
- Study of the fatigue failure of an anti-return valve of a high pressure machineEngineering Failure Analysis, 2007
- Analysis of premature failure of a tie bar in an injection molding machineEngineering Failure Analysis, 2006