A 3D Printed Membrane Reactor System for Electrochemical CO2 Conversion
Open Access
Abstract
Nowadays, CO2 electroreduction is gaining special interest as achieving net zero CO2 emissions is not going to be enough to avoid or mitigate the negative effects of climate change. However, the cost of CO2 electroreduction is still very high because of the low efficiency of conversion (around 20%). Therefore, it is necessary to optimize the reaction conditions. Thus, a miniaturized novel membrane reactor was designed and manufactured in this study, with a shorter distance between the electrodes and a reduced volume, compared with CNC-manufactured reactors, using novel stereolithography-based 3D printing. The reduced distance between the two electrodes reduced the electrical resistance and therefore lowered the overpotential necessary to trigger the reaction from −1.6 V to −1.2 V, increasing the efficiency. In addition, the reduction in the volume of the reactor increased the catalyst area/volume ratio, which also boosted the concentration of the products (from FE 18% to FE 21%), allowing their better identification. Furthermore, the smaller volume and reduced complexity of the reactor also improved the testing capacity and decreased the cost of experimentation. The novel miniaturized reactor can help researchers to perform more experiments in a cost/time-effective way, facilitating the optimization of the reaction conditions.Keywords
Funding Information
- Regional Agency for the Business Competitiveness of the Generalitat de Catalunya (ENE2017-86711-C3-3-R)
- Eurecat (ENE2017-86711-C3-3-R)
This publication has 18 references indexed in Scilit:
- A comparison of traditional manufacturing vs additive manufacturing, the best method for the jobProcedia Manufacturing, 2019
- Advances in Methanol Production and Utilization, with Particular Emphasis toward Hydrogen Generation via Membrane Reactor TechnologyMembranes, 2018
- Atmospheric CO2 capture for the artificial photosynthetic systemScience of The Total Environment, 2018
- Ambient CO 2 adsorption via membrane contactors – Value of assimilation from air as nature stomataJournal of Membrane Science, 2018
- Atmospheric CO2 capture for the artificial photosynthetic systemE3S Web of Conferences, 2017
- Role of the oxide layer on Sn electrode in electrochemical reduction of CO 2 to formateApplied Surface Science, 2015
- Catalyzing the Hydrogen Evolution Reaction (HER) with Molybdenum Sulfide NanomaterialsACS Catalysis, 2014
- Tin Oxide Dependence of the CO2 Reduction Efficiency on Tin Electrodes and Enhanced Activity for Tin/Tin Oxide Thin-Film CatalystsJournal of the American Chemical Society, 2012
- Overview on Direct Formic Acid Fuel Cells (DFAFCs) as an Energy SourcesAPCBEE Procedia, 2012
- Crossover of formic acid through Nafion® membranesJournal of Power Sources, 2003