Optimized Load Trajectory for Finite Peaking OFF-State Impedance-Based Doherty Power Amplifiers
- 23 May 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 29 (7) , 486-488
Abstract
This letter presents an optimized load trajectory for symmetrical Doherty power amplifiers (DPA) with finite peaking off-state output impedance. This presented architecture uses the transistor's nonlinear phase distortion (NPD) to enhance the average drain efficiency (DE) of the DPA with the proper choice of carrier and peaking power amplifier (PA) load trajectories. A gallium nitride (GaN)-based DPA operating at 2.2 GHz has been designed and fabricated using the presented design methodology. The DPA delivers 43 dBm of output power at 3-dB compression (P-3 dB) and exhibits a DE of 55.5% at 9-dB OBO under continuous wave (CW) excitation. The DPA achieves average DE of 55% with linearized adjacent channel power ratio (ACPR) of -56.0 dBc with a 20-MHz LTE signal. This letter demonstrates that NPD in a DPA with finite peaking off-state impedance can be used to achieve excellent back-off efficiency and linearity.Keywords
This publication has 6 references indexed in Scilit:
- Extending high‐efficiency power range of symmetrical Doherty power amplifiers by taking advantage of peaking stageIET Microwaves, Antennas & Propagation, 2017
- Extended Efficiency Range, Equal-Cell Doherty Amplifier Design Using Explicit Circuit ModelIEEE Microwave and Wireless Components Letters, 2017
- Accurate Offset Line Design of Doherty Amplifier With Compensation of Peaking Amplifier Phase VariationIEEE Transactions on Microwave Theory and Techniques, 2016
- Symmetrical Doherty Power Amplifier With Extended Efficiency RangeIEEE Transactions on Microwave Theory and Techniques, 2016
- A Modified Doherty Configuration for Broadband Amplification Using Symmetrical DevicesIEEE Transactions on Microwave Theory and Techniques, 2012
- A Transformer-Less Load-Modulated (TLLM) Architecture for Efficient Wideband Power AmplifiersIEEE Transactions on Microwave Theory and Techniques, 2012