Jennifer Kitchen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jennifer Kitchen has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Soroush Moallemi
Skyworks Solutions, Newbury Park, CA, USA
3 shared publications - Jae Woong Jeong
School of Electrical Engineering Korea Advanced Institute of Science and Technology (KAIST) 291 Daehak‐ro, Yuseong‐gu Daejeon 34141 Republic of Korea
2 shared publications Karel Ptacek
Onsemi, Rožnov, Czech Republic
2 shared publications- Kevin Grout
Connection One Research Center, Department of Electrical Engineering, Arizona State University, Tempe, AZ 85287 USA
2 shared publications - Mahdi Javid
School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, AZ, USA
2 shared publications - Muhammad Ruhul Hasin
School of Electrical, Computer, and Energy Engineering, Arizona State University, Tempe, AZ 85287 USA
2 shared publications
Latest Publications
- 6 March 2024
- Published by Taylor & Francis
- p. 241-253
“Shakespeare on your doorstep”: Opportunities for inclusion and participation in the educational and community work of Shakespeare North Playhouse
This chapter takes a comment from a Shakespeare North Playhouse promotional video: “To have something called ‘Shakespeare’ on your doorstep; it makes you feel important” as a jumping-off point to explore the potential for inclusion, participation, and empowerment in the education and community work of Shakespeare heritage theatre spaces such as SNP. Drawing on my past experience as a Shakespeare’s Globe education practitioner and research into the social justice potential of Coram Shakespeare Schools Foundation festival, this chapter offers three key guiding concepts to frame this analysis: the space as a dynamic ‘laboratory’ site, pedagogic practice grounded by a sense of ‘ensemble’, and a ‘re-storying’ approach to Shakespeare’s texts. Using interview extracts from past and present members of SNP’s engagement and education team, I then explore the education and community offer of the theatre’s opening season through these three concepts.
- 6 March 2024
- Published by Taylor & Francis
- p. 241-253
“Shakespeare on your doorstep”: Opportunities for inclusion and participation in the educational and community work of Shakespeare North Playhouse
This chapter takes a comment from a Shakespeare North Playhouse promotional video: “To have something called ‘Shakespeare’ on your doorstep; it makes you feel important” as a jumping-off point to explore the potential for inclusion, participation, and empowerment in the education and community work of Shakespeare heritage theatre spaces such as SNP. Drawing on my past experience as a Shakespeare’s Globe education practitioner and research into the social justice potential of Coram Shakespeare Schools Foundation festival, this chapter offers three key guiding concepts to frame this analysis: the space as a dynamic ‘laboratory’ site, pedagogic practice grounded by a sense of ‘ensemble’, and a ‘re-storying’ approach to Shakespeare’s texts. Using interview extracts from past and present members of SNP’s engagement and education team, I then explore the education and community offer of the theatre’s opening season through these three concepts.
- 2 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (5) , 6036-6062
A Review of Hybrid Supply Modulators in CMOS Technologies for Envelope Tracking PAs
This article reviews trends, architectures, and recent developments in CMOS-based supply modulators (SM) used for envelope-tracking power amplifiers (ET-PAs). This review details the most commonly used hybrid supply modulator (HSM) architecture in CMOS and discusses its performance requirements and design challenges. The importance of efficiency, speed, linearity, and output power in HSM design is delineated and different methods that focus on maximizing these performance parameters are presented. Finally, the design challenges of envelope tracking systems are discussed, and an overview of device technologies for implementing SM and ET-PAs is given.
- 2 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (5) , 6036-6062
A Review of Hybrid Supply Modulators in CMOS Technologies for Envelope Tracking PAs
This article reviews trends, architectures, and recent developments in CMOS-based supply modulators (SM) used for envelope-tracking power amplifiers (ET-PAs). This review details the most commonly used hybrid supply modulator (HSM) architecture in CMOS and discusses its performance requirements and design challenges. The importance of efficiency, speed, linearity, and output power in HSM design is delineated and different methods that focus on maximizing these performance parameters are presented. Finally, the design challenges of envelope tracking systems are discussed, and an overview of device technologies for implementing SM and ET-PAs is given.
- 1 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (7) , 3345
RFIC 2021 Guest Editorial
This Mini-Special Issue of the IEEE Transactions on Microwave Theory and Techniques (TMTT) includes five articles that have been expanded from innovative works presented at the 2021 Radio Frequency Integrated Circuits Symposium, which was held in June 2021. After over a year of virtual conferences, the 2021 RFIC Symposium was held both virtually and in-person in Atlanta, GA, USA. The hybrid format offered panels, technical lectures, interactive workshops, and 14 engaging technical sessions to attendees and authors. All virtual events were live-streamed. The opportunity to attend in both formats was only possible with the diligence, creativity, and excellent leadership of the 2021 General Chair, Brian Floyd, and the Technical Program Chair and Co-Chair, Osama Shana’a and Donald Lie.
- 1 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (7) , 3345
RFIC 2021 Guest Editorial
This Mini-Special Issue of the IEEE Transactions on Microwave Theory and Techniques (TMTT) includes five articles that have been expanded from innovative works presented at the 2021 Radio Frequency Integrated Circuits Symposium, which was held in June 2021. After over a year of virtual conferences, the 2021 RFIC Symposium was held both virtually and in-person in Atlanta, GA, USA. The hybrid format offered panels, technical lectures, interactive workshops, and 14 engaging technical sessions to attendees and authors. All virtual events were live-streamed. The opportunity to attend in both formats was only possible with the diligence, creativity, and excellent leadership of the 2021 General Chair, Brian Floyd, and the Technical Program Chair and Co-Chair, Osama Shana’a and Donald Lie.
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (2) , 587-598
A 650 kV/μs Common-Mode Resilient CMOS Galvanically Isolated Communication System
This work presents a galvanically isolated chip-to-chip communication system that utilizes laterally coupled resonators in combination with a new differential full-wave receiver architecture. Lateral resonant coupling increases the isolation capability and significantly minimizes the intra-chip coupling capacitance of galvanic isolators beyond the limits of vertical coupling in standard CMOS. The presented system marries the merits of a laterally resonant coupled channel with a source-gate coupled low-power, low-latency RF detector architecture that enables high common-mode and differential noise immunity. A center-tapped transformer is used as the interface between the proposed fully differential receiver and the communication channel to further enhance the common-mode transient immunity (CMTI). The proposed system is integrated in a $0.25~\mu \text{m}$ CMOS process with four metal layers and does not alter the native process or necessitate additional fabrication steps. The design does not require exotic packaging and achieves state-of-art CMTI of 650 kV/ $\mu \text{s}$ at 5 kVpk isolation, sub-20ns propagation delay, and maintains a small form-factor of 0.95 mm 2 . The GI system exhibits robust performance to fabrication variations, with less than ±0.3% and ±8% sensitivity to process variation and post-assembly chip distance offset, respectively.
- 25 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (2) , 587-598
A 650 kV/μs Common-Mode Resilient CMOS Galvanically Isolated Communication System
This work presents a galvanically isolated chip-to-chip communication system that utilizes laterally coupled resonators in combination with a new differential full-wave receiver architecture. Lateral resonant coupling increases the isolation capability and significantly minimizes the intra-chip coupling capacitance of galvanic isolators beyond the limits of vertical coupling in standard CMOS. The presented system marries the merits of a laterally resonant coupled channel with a source-gate coupled low-power, low-latency RF detector architecture that enables high common-mode and differential noise immunity. A center-tapped transformer is used as the interface between the proposed fully differential receiver and the communication channel to further enhance the common-mode transient immunity (CMTI). The proposed system is integrated in a $0.25~\mu \text{m}$ CMOS process with four metal layers and does not alter the native process or necessitate additional fabrication steps. The design does not require exotic packaging and achieves state-of-art CMTI of 650 kV/ $\mu \text{s}$ at 5 kVpk isolation, sub-20ns propagation delay, and maintains a small form-factor of 0.95 mm 2 . The GI system exhibits robust performance to fabrication variations, with less than ±0.3% and ±8% sensitivity to process variation and post-assembly chip distance offset, respectively.
- 10 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 31 (7) , 881-884
2.6-GHz Integrated LDMOS Doherty Power Amplifier for 5G Basestation Applications
This letter presents a compact output combining network for a packaged integrated asymmetric Doherty Power Amplifier (DPA). The combining network uses a new method for absorbing part of the peaking amplifier’s Cds into the impedance transformer, thus extending the C-L-C based “Cds absorption" technique to asymmetric DPAs. Based on the proposed combining network, a two-stage LDMOS integrated asymmetric DPA was designed and fabricated at 2.6 GHz. The fabricated IC is mounted in a quad flat no-lead (QFN) package. Under a single-tone continuous-wave (CW) signal at 2.6 GHz, the DPA achieves peak power of 46 dBm, linear gain of 31.7 dB and 48% power-added efficiency (PAE) at 8 dB output power back-off (OBO). The DPA also demonstrates good linearizability by meeting the 5G spectrum mask and achieving a DPD corrected ACPR better than -51dBc for 160 MHz long term evolution (LTE).
- 10 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 31 (7) , 881-884
2.6-GHz Integrated LDMOS Doherty Power Amplifier for 5G Basestation Applications
This letter presents a compact output combining network for a packaged integrated asymmetric Doherty Power Amplifier (DPA). The combining network uses a new method for absorbing part of the peaking amplifier’s Cds into the impedance transformer, thus extending the C-L-C based “Cds absorption" technique to asymmetric DPAs. Based on the proposed combining network, a two-stage LDMOS integrated asymmetric DPA was designed and fabricated at 2.6 GHz. The fabricated IC is mounted in a quad flat no-lead (QFN) package. Under a single-tone continuous-wave (CW) signal at 2.6 GHz, the DPA achieves peak power of 46 dBm, linear gain of 31.7 dB and 48% power-added efficiency (PAE) at 8 dB output power back-off (OBO). The DPA also demonstrates good linearizability by meeting the 5G spectrum mask and achieving a DPD corrected ACPR better than -51dBc for 160 MHz long term evolution (LTE).
- 15 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A Broadband Class AB Power Amplifier with Second Harmonic Injection
This work presents a broadband class AB push-pull power amplifier with second harmonic injection, where the second harmonic is injected through the center tap of an even harmonic trap to improve the class AB push-pull efficiency over an octave of bandwidth. The PA is designed and simulated in a 65 nm CMOS technology, and exhibits greater than 22.7% PAE from 2 GHz to 6.7 GHz at an average saturated output power of 22 dBm over the entire band. At saturated output power, the maximum PAE improves by 2.5% compared to the conventional push-pull class AB. The PA's gain is 12 dB, with input return loss better than -10 dB from 2 to 6.7 GHz, resulting in a 108 % fractional bandwidth.
- 15 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A Broadband Class AB Power Amplifier with Second Harmonic Injection
This work presents a broadband class AB push-pull power amplifier with second harmonic injection, where the second harmonic is injected through the center tap of an even harmonic trap to improve the class AB push-pull efficiency over an octave of bandwidth. The PA is designed and simulated in a 65 nm CMOS technology, and exhibits greater than 22.7% PAE from 2 GHz to 6.7 GHz at an average saturated output power of 22 dBm over the entire band. At saturated output power, the maximum PAE improves by 2.5% compared to the conventional push-pull class AB. The PA's gain is 12 dB, with input return loss better than -10 dB from 2 to 6.7 GHz, resulting in a 108 % fractional bandwidth.
- 1 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Dynamically Load Modulated Power Amplifier Using Transistor Source Impedance Variation
This work presents a novel dynamic load modulation (DLM) power amplifier that does not require an input power splitter. The load is modulated using an auxiliary transistor's source impedance variation with output power. A proof of concept circuit is designed and simulated in a 65 nm TSMC CMOS technology. The transconductance $(\mathbf{g}_{\mathbf{m}})$ of the auxiliary transistor is used as the PA's load modulator. Operating from 2.3-2.5 GHz, the DLM PA demonstrates an output power of 10.4 dBm at 2.5 dB compression and a maximum gain of about 20 dB. The PA's power added efficiency (PAE) is 27% at the peak power and 20% at 6 dB output power back off. Output power combining is realized using an unequal lumped-element Wilkinson power combiner. The presented DLM PA has compact size because it does not require an input power splitter.- 1 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Dynamically Load Modulated Power Amplifier Using Transistor Source Impedance Variation
This work presents a novel dynamic load modulation (DLM) power amplifier that does not require an input power splitter. The load is modulated using an auxiliary transistor's source impedance variation with output power. A proof of concept circuit is designed and simulated in a 65 nm TSMC CMOS technology. The transconductance $(\mathbf{g}_{\mathbf{m}})$ of the auxiliary transistor is used as the PA's load modulator. Operating from 2.3-2.5 GHz, the DLM PA demonstrates an output power of 10.4 dBm at 2.5 dB compression and a maximum gain of about 20 dB. The PA's power added efficiency (PAE) is 27% at the peak power and 20% at 6 dB output power back off. Output power combining is realized using an unequal lumped-element Wilkinson power combiner. The presented DLM PA has compact size because it does not require an input power splitter.- 28 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 67 (11) , 2337-2341
A Dividerless Ring Oscillator PLL With 250fs Integrated Jitter Using Sampled Lowpass Filter
This work presents a novel ring oscillator based phase lock loop architecture that is capable of wideband, dividerless integer-N synthesis. The noise transfer function of the presented architecture is the same as a sub-sampling phase lock loop (PLL). Like a sub-sampling PLL, the presented architecture removes the phase detector and charge pump’s N2 noise that dominates the in-band noise of traditional PLLs. This noise reduction allows the presented ring oscillator PLL to operate with integrated jitter as low as 250fs. Unlike sub-sampling PLLs, the presented architecture moves the sampling block downstream of the loop filter. As the sampled data is lowpass filtered, only low frequency sampling blocks are required, which removes the power and area overheads associated with directly sampling the voltage controlled oscillator. Measurement results show the presented PLL is capable of locking over a wide range of 1.2-2.5GHz. The presented PLL is fabricated in 65nm bulk CMOS, and demonstrates a figure of merit of -242.7dB, which is among best in class for ring oscillator PLLs. Furthermore, an area of 0.0066 mm is consumed, which represents the smallest published sub-sampling ring oscillator PLLs.
- 28 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 67 (11) , 2337-2341
A Dividerless Ring Oscillator PLL With 250fs Integrated Jitter Using Sampled Lowpass Filter
This work presents a novel ring oscillator based phase lock loop architecture that is capable of wideband, dividerless integer-N synthesis. The noise transfer function of the presented architecture is the same as a sub-sampling phase lock loop (PLL). Like a sub-sampling PLL, the presented architecture removes the phase detector and charge pump’s N2 noise that dominates the in-band noise of traditional PLLs. This noise reduction allows the presented ring oscillator PLL to operate with integrated jitter as low as 250fs. Unlike sub-sampling PLLs, the presented architecture moves the sampling block downstream of the loop filter. As the sampled data is lowpass filtered, only low frequency sampling blocks are required, which removes the power and area overheads associated with directly sampling the voltage controlled oscillator. Measurement results show the presented PLL is capable of locking over a wide range of 1.2-2.5GHz. The presented PLL is fabricated in 65nm bulk CMOS, and demonstrates a figure of merit of -242.7dB, which is among best in class for ring oscillator PLLs. Furthermore, an area of 0.0066 mm is consumed, which represents the smallest published sub-sampling ring oscillator PLLs.
- 1 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (8) , 3455-3463
Exploiting Phase for Extended Efficiency Range in Symmetrical Doherty Power Amplifiers
- 1 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (8) , 3455-3463
Exploiting Phase for Extended Efficiency Range in Symmetrical Doherty Power Amplifiers
- 23 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 29 (7) , 486-488
Optimized Load Trajectory for Finite Peaking OFF-State Impedance-Based Doherty Power Amplifiers
This letter presents an optimized load trajectory for symmetrical Doherty power amplifiers (DPA) with finite peaking off-state output impedance. This presented architecture uses the transistor's nonlinear phase distortion (NPD) to enhance the average drain efficiency (DE) of the DPA with the proper choice of carrier and peaking power amplifier (PA) load trajectories. A gallium nitride (GaN)-based DPA operating at 2.2 GHz has been designed and fabricated using the presented design methodology. The DPA delivers 43 dBm of output power at 3-dB compression (P-3 dB) and exhibits a DE of 55.5% at 9-dB OBO under continuous wave (CW) excitation. The DPA achieves average DE of 55% with linearized adjacent channel power ratio (ACPR) of -56.0 dBc with a 20-MHz LTE signal. This letter demonstrates that NPD in a DPA with finite peaking off-state impedance can be used to achieve excellent back-off efficiency and linearity.
- 23 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 29 (7) , 486-488
Optimized Load Trajectory for Finite Peaking OFF-State Impedance-Based Doherty Power Amplifiers
This letter presents an optimized load trajectory for symmetrical Doherty power amplifiers (DPA) with finite peaking off-state output impedance. This presented architecture uses the transistor's nonlinear phase distortion (NPD) to enhance the average drain efficiency (DE) of the DPA with the proper choice of carrier and peaking power amplifier (PA) load trajectories. A gallium nitride (GaN)-based DPA operating at 2.2 GHz has been designed and fabricated using the presented design methodology. The DPA delivers 43 dBm of output power at 3-dB compression (P-3 dB) and exhibits a DE of 55.5% at 9-dB OBO under continuous wave (CW) excitation. The DPA achieves average DE of 55% with linearized adjacent channel power ratio (ACPR) of -56.0 dBc with a 20-MHz LTE signal. This letter demonstrates that NPD in a DPA with finite peaking off-state impedance can be used to achieve excellent back-off efficiency and linearity.