Structure and mechanical properties of oxide films on zirconium alloys upon oxidation under different conditions
- 5 January 2014
- journal article
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 50 (1) , 64-68
Abstract
The structure and mechanical properties, as well as the mechanism and kinetics of the destruction of oxide films formed on tube specimens of E110 zirconium alloy based on electrolytic or sponge zirconium upon corrosion testing in an autoclave and high-temperature oxidation in steam (LOCA conditions), were studied with the use of transmission and scanning electron microscopy, microhardness measurements, acoustic emission, and fractography. Oxide films on specimens made of electrolytic zirconium upon testing in an autoclave are found to be composed of extended grains with a thickness of 100 nm, while those on sponge specimens are composed chiefly of equiaxial grains with a diameter of 30 nm. After high-temperature oxidation, the structure of oxide films consists of extended grains of a variable thickness, which increases from the surface to the film-metal boundary from 600 nm to 2.5 μm on specimens made of electrolytic zirconium and from 250 nm to 2 μm on sponge-zirconium specimens. The microhardness of films after testing in an autoclave is 1200 ± 50 HV on electrolytic zirconium and 2000 ± 50 HV on sponge zirconium. The hardness of films on sponge-zirconium specimens upon high-temperature oxidation is 1600 ± 50 HV. The combined analysis of deformation diagrams, fractures, and acoustic emission data showed that the destruction of thin oxide films after testing in an autoclave and that of thick films after high-temperature oxidation begins with the formation of transverse brittle ruptures at the same load of 12–15 MPa. The number of cracks in the films on specimens that underwent high-temperature oxidation increases under loading especially rapidly on electrolytic zirconium.Keywords
This publication has 7 references indexed in Scilit:
- High temperature steam oxidation study on Zr–2.5%Nb pressure tube under simulated LOCA conditionJournal of Nuclear Materials, 2013
- Oxidation properties of Zr–Nb alloys at 973–1273K in airProgress in Nuclear Energy, 2009
- Study on Influence of Tetragonal ZrO2 in Oxide Film on Corrosion Resistance of Zr-Sn-Nb AlloyRare Metal Materials and Engineering, 2008
- Hardness anomaly, plastic deformation work and fretting wear properties of polycrystalline TiN/CrN multilayersWear, 1999
- Microstructure of Oxides on Zircaloy-4, 1.0Nb Zircaloy-4, and Zircaloy-2 Formed in 10.3-MPa Steam at 673 K1996
- Oxide Growth Mechanism on Zirconium Alloys1991
- Effect of Alloying Elements on Uniform Corrosion Resistance of Zirconium-based Alloys in 360°C Water and 400°C Steam1991