Antirollback Control for Gearless Elevator Traction Machines Adopting Offset-Free Model Predictive Control Strategy
Authors:
- 12 May 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 62 (10) , 6194-6203
Abstract
Direct-drive permanent magnet traction systems have become the trend of modern elevators. Elevator traction machines tend to use low-resolution incremental encoders as position and speed feedback devices because of their low cost. To prevent the occurrence of elevator car rollback for the gearless elevator installed with an incremental encoder with general resolution, a weight-transducerless starting torque strategy based on offset-free model predictive control is proposed. Under the condition of low-resolution incremental encoders, this control strategy can achieve a fast dynamic response and no mechanical vibration during the mechanical brake releasing. The electromagnetic torque generated by the machine can quickly balance the uncertain load torque to minimize the sliding distance of the elevator car, which contributes in achieving superior riding comfort. In order to overcome the mismatch of the predictive model caused by the uncertainty and nonlinearity of the mechanical model of the traction system, as well as intense disturbance, a model corrector is added to adjust the mismatched predictive model. The steady-state speed error can be eliminated by adding the equivalent disturbance estimator to the predictive model during the zero-servo operation at elevator startup. Finally, both simulation and experimental results are provided to verify that the proposed control strategy can achieve shorter sliding distance, smaller sliding speed, and faster dynamic response.Keywords
Funding Information
- Research Fund for the National Science Foundation of China (51207030)
- Power Electronics Science and Education Development Program of the Delta Environmental and Education Foundation (DREK2015002)
- Fundamental Research Funds for the Central Universities (HIT. BRETIII. 201407)
This publication has 27 references indexed in Scilit:
- Predictive Control of Power Converters: Designs With Guaranteed PerformanceIEEE Transactions on Industrial Informatics, 2014
- Development of a Direct-Drive Servo Valve With High-Frequency Voice Coil Motor and Advanced Digital ControllerIEEE/ASME Transactions on Mechatronics, 2014
- Dynamic Fuzzy Logic Elevator Group Control System With Relative Waiting Time ConsiderationIEEE Transactions on Industrial Electronics, 2013
- Weight-Transducerless Starting Torque Compensation of Gearless Permanent-Magnet Traction Machine for Direct-Drive ElevatorsIEEE Transactions on Industrial Electronics, 2013
- Estimation of Load Disturbance Torque for DC Motor Drive Systems Under Robustness and Sensitivity ConsiderationIEEE Transactions on Industrial Electronics, 2013
- Observer-Based Compensation of Additive Periodic Torque Disturbances in Permanent Magnet MotorsIEEE Transactions on Industrial Informatics, 2012
- Robust Low-Cost Control Scheme of Direct-Drive Gearless Traction Machine for Elevators Without a Weight TransducerIEEE Transactions on Industry Applications, 2012
- Fuzzy Sliding Mode Speed Controller for PM Synchronous Motors With a Load Torque ObserverIEEE Transactions on Power Electronics, 2011
- Modelling and design of a direct-drive lift control with rope elasticity and estimation of starting torque2007
- Output feedback tracking control of MIMO systems using a fuzzy disturbance observer and its application to the speed control of a PM synchronous motorIEEE Transactions on Fuzzy Systems, 2005