Effects of intima stiffness and plaque morphology on peak cap stress
Authors:
- Ali C AkyildizAAAli C Akyildiz
- Lambert SpeelmanLSLambert Speelman
- Harald van BrummelenHBHarald van Brummelen
- Miguel A GutiérrezMGMiguel A Gutiérrez
- Renu VirmaniRVRenu Virmani
- Aad van der LugtALAad van der Lugt
- Anton Fw van der SteenASAnton Fw van der Steen
- Jolanda J WentzelJWJolanda J Wentzel
- Frank Jh GijsenFGFrank Jh Gijsen
Open Access
- 1 January 2011
- journal article
- research article
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 10 (1) , 25
Abstract
Rupture of the cap of a vulnerable plaque present in a coronary vessel may cause myocardial infarction and death. Cap rupture occurs when the peak cap stress exceeds the cap strength. The mechanical stress within a cap depends on the plaque morphology and the material characteristics of the plaque components. A parametric study was conducted to assess the effect of intima stiffness and plaque morphology on peak cap stress. Models with idealized geometries based on histology images of human coronary arteries were generated by varying geometric plaque features. The constructed multi-layer models contained adventitia, media, intima, and necrotic core sections. For adventitia and media layers, anisotropic hyperelastic material models were used. For necrotic core and intima sections, isotropic hyperelastic material models were employed. Three different intima stiffness values were used to cover the wide range reported in literature. According to the intima stiffness, the models were classified as stiff, intermediate and soft intima models. Finite element method was used to compute peak cap stress. The intima stiffness was an essential determinant of cap stresses. The computed peak cap stresses for the soft intima models were much lower than for stiff and intermediate intima models. Intima stiffness also affected the influence of morphological parameters on cap stresses. For the stiff and intermediate intima models, the cap thickness and necrotic core thickness were the most important determinants of cap stresses. The peak cap stress increased three-fold when the cap thickness was reduced from 0.25 mm to 0.05 mm for both stiff and intermediate intima models. Doubling the thickness of the necrotic core elevated the peak cap stress by 60% for the stiff intima models and by 90% for the intermediate intima models. Two-fold increase in the intima thickness behind the necrotic core reduced the peak cap stress by approximately 25% for both intima models. For the soft intima models, cap thickness was less critical and changed the peak cap stress by 55%. However, the necrotic core thickness was more influential and changed the peak cap stress by 100%. The necrotic core angle emerged as a critical determinant of cap stresses where a larger angle lowered the cap stresses. Contrary to the stiff and intermediate intima models, a thicker intima behind the necrotic core increased the peak cap stress by approximately 25% for the soft intima models. Adventitia thickness and local media regression had limited effects for all three intima models. For the stiff and intermediate intima models, the cap thickness was the most important morphological risk factor. However for soft intima models, the necrotic core thickness and necrotic core angle had a bigger impact on the peak cap stress. We therefore need to enhance our knowledge of intima material properties if we want to derive critical morphological plaque features for risk evaluation.Keywords
This publication has 50 references indexed in Scilit:
- A Methodology to Analyze Changes in Lipid Core and Calcification Onto Fibrous Cap Vulnerability: The Human Atherosclerotic Carotid Bifurcation as an Illustratory ExampleJournal of Biomechanical Engineering, 2009
- Sites of Rupture in Human Atherosclerotic Carotid Plaques Are Associated With High Structural StressesStroke, 2009
- Mechanical stress analysis of a rigid inclusion in distensible material: a model of atherosclerotic calcification and plaque vulnerabilityAmerican Journal of Physiology-Heart and Circulatory Physiology, 2009
- Local critical stress correlates better than global maximum stress with plaque morphological features linked to atherosclerotic plaque vulnerability: an in vivo multi-patient studyBioMedical Engineering OnLine, 2009
- Necrotic core thickness and positive arterial remodeling index: emergent biomechanical factors for evaluating the risk of plaque ruptureAmerican Journal of Physiology-Heart and Circulatory Physiology, 2008
- A negative correlation between human carotid atherosclerotic plaque progression and plaque wall stress: In vivo MRI-based 2D/3D FSI modelsJournal of Biomechanics, 2008
- Local Maximal Stress Hypothesis and Computational Plaque Vulnerability Index for Atherosclerotic Plaque AssessmentAnnals of Biomedical Engineering, 2005
- Hyperelastic modelling of arterial layers with distributed collagen fibre orientationsJournal of The Royal Society Interface, 2005
- Circumferential Stress and Matrix Metalloproteinase 1 in Human Coronary AtherosclerosisArteriosclerosis, Thrombosis, and Vascular Biology, 1996
- Testing of small connective tissue specimens for the determination of the mechanical behaviour of atherosclerotic plaquesJournal of Biomedical Engineering, 1993