Assessing the Dynamic Performance of Thermochemical Storage Materials
Open Access
Abstract
Thermochemical storage provides a volumetric and cost-efficient means of collecting energy from solar/waste heat in order to utilize it for space heating in another location. Equally important to the storage density, the dynamic thermal response dictates the power available which is critical to meet the varied demands of a practical space heating application. Using a laboratory scale reactor (127 cm3), an experimental study with salt in matrix (SIM) materials found that the reactor power response is primarily governed by the flow rate of moist air through the reactor and that creating salt with a higher salt fraction had minimal impact on the thermal response. The flowrate dictates the power profile of the reactor with an optimum value which balances moisture reactant delivery and reaction rate on the SIM. A mixed particle size produced the highest power (22 W) and peak thermal uplift (32 °C). A narrow particle range reduced the peak power and peak temperature as a result of lower packing densities of the SIM in the reactor. The scaled maximum power density which could be achieved is >150 kW/m3, but achieving this would require optimization of the solid–moist air interactions.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/N020863/1)
- Innovate UK (920036)
- European Regional Development Fund (c80892)
This publication has 23 references indexed in Scilit:
- Experimental investigation of a moving-bed heat storage thermochemical reactor with SrBr2/H2O coupleJournal of Energy Storage, 2019
- High energy-density multi-form thermochemical energy storage based on multi-step sorption processesEnergy, 2019
- Structure and hydration state characterizations of MgSO4-zeolite 13x composite materials for long-term thermochemical heat storageSolar Energy Materials and Solar Cells, 2019
- An overview of thermal energy storage systemsEnergy, 2018
- Further improvement of the synthesis of silica gel and CaCl2 composites: Enhancement of energy storage density and stability over cycles for solar heat storage coupled with space heating applicationsSolar Energy, 2017
- Thermal energy storage in building integrated thermal systems: A review. Part 1. active storage systemsRenewable Energy, 2016
- Thermal energy storage: Recent developments and practical aspectsProgress in Energy and Combustion Science, 2016
- Enhancing the heat storage density of silica–alumina by addition of hygroscopic salts (CaCl2, Ba(OH)2, and LiNO3)Solar Energy Materials and Solar Cells, 2015
- A Review on the Properties of Salt Hydrates for Thermochemical StorageEnergy Procedia, 2014
- A review of available methods for seasonal storage of solar thermal energy in residential applicationsRenewable and Sustainable Energy Reviews, 2011