Preparation of Nanocomposites of Poly(ε-caprolactone) and Multi-Walled Carbon Nanotubes by Ultrasound Micro-Molding. Influence of Nanotubes on Melting and Crystallization
Open Access
Abstract
Ultrasound micro-molding technology was successfully applied to prepare nanocomposites based on a poly(ε-caprolactone) (PCL) matrix and multi-walled carbon nanotubes (MWCNTs). Optimization of processing parameters (i.e. amplitude, force and time) was crucial to obtain nanocomposites without any evidence of degradation, high material saving and short processing time (7–8 s). Good dispersion of nanotubes was achieved after processing previously formed solvent casting films. This dispersion was even partially detected in pieces directly obtained from powder mixtures of both components. Incorporation of MWCNTs had a remarkable influence on melting and crystallization processes, which were systematically studied by time resolved synchrotron experiments. Results indicated higher melting and crystallization temperatures for the nanocomposite, with temperature differences higher than 5 °C. Carbon nanotubes were effective nucleating agents and had an influence on crystallinity, crystallization rate and even on lamellar morphology, which was evaluated by analysis of the correlation function of small angle diffraction profiles. Crystallinity within lamellar stacks was lower for the solvent casting nanocomposite, but in this case lamellae underwent a thickening process during heating that accounted for the increase in the melting temperature. Crystallization from the melt rendered similar lamellar morphologies at the end of the process due to a lamellar insertion mechanism.Keywords
This publication has 28 references indexed in Scilit:
- Dispersion of Functionalized Silica Micro- and Nanoparticles into Poly(nonamethylene Azelate) by Ultrasonic Micro-MoldingApplied Sciences, 2015
- Preparation of micro-molded exfoliated clay nanocomposites by means of ultrasonic technologyJournal of Polymer Research, 2014
- Micro-molding with ultrasonic vibration energy: New method to disperse nanoclays in polymer matricesUltrasonics Sonochemistry, 2014
- Manufacturing of polymer micro parts by ultrasonic plasticization and direct injectionMicrosystem Technologies, 2011
- Effects of ultrasound on the conformation and crystallization behavior of isotactic polypropylene and β-isotactic polypropylenePolymer, 2010
- Physical and chemical effects of ultrasound vibration on polymer melt in extrusionUltrasonics Sonochemistry, 2010
- Ultrasonic investigations of the thermoplastics injection moulding processPolymer Testing, 2005
- Influence of ultrasound on the processing and structure of polypropylene during extrusionPolymer Engineering & Science, 2002
- Ultrasonic improvement of rheological behavior of polystyreneJournal of Applied Polymer Science, 2002
- New plastification concepts for micro injection mouldingMicrosystem Technologies, 2002