Crystallization mechanism and mechanical properties of CF/PPS thermoplastic composites manufactured by laser-assisted automated fiber placement
- 4 November 2022
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 57 (1) , 49-61
Abstract
In situ consolidation of the thermoplastic composites can be realized through laser-assisted automated fiber placement technology, and the properties of the composites are significantly affected by the crystallinity. Understanding the complicated crystallization process is very important for controlling the performance of the composites manufactured by automated fiber placement. In this work, the crystallization mechanism of carbon fiber/polyphenylene sulfide composites during the automated fiber placement process and its effect on the mechanical properties were investigated. Crystallization kinetics analysis indicated that the crystallization window of the carbon fiber/polyphenylene sulfide composites was 87–270°C. Furthermore, for carbon fiber/polyphenylene sulfide composites manufactured by automated fiber placement, the crystallinity was influenced by the parameters including laser temperature, placement speed and tool temperature, in which the tool temperature was the main factor. Increasing the tool temperature was an effective method to achieve high crystallinity. Meanwhile, when the tool temperature was in the range of the crystallization window, the composites could experience isothermal crystallization, which could further improve the crystallinity. With the increase of the tool temperature, the flexural strength and interlaminar shear strength were improved due to the enhanced self-adhesion of the matrix, while the Mode І fracture toughness was decreased because of the reduction of the matrix ductility. The combination of the kinetic method and experimental study was conducive to a better understanding of the crystallization mechanism and optimization of the processing conditions.Keywords
Funding Information
- the Fundamental Research Funds for the Central Universities
- Key R&D Plan Project of Ningxia Hui Autonomous Region (2021BEE02017)
- Shanghai Science and Technology Innovation Action Plan Project (20511106902)
This publication has 35 references indexed in Scilit:
- Polypentadecalactone prepared by lipase catalysis: crystallization kinetics and morphologyPolymer International, 2009
- Computational and experimental analysis of fusion bonding in thermoplastic composites: Influence of process parametersJournal of Materials Processing Technology, 2009
- Effects of Processing Conditions on the Mechanical Behavior of Carbon-Fiber-Reinforced PEEKJournal of Thermoplastic Composite Materials, 2001
- Crystallinity of On-Line Consolidated Thermoplastic CompositesJournal of Composite Materials, 1999
- Thermochemical and Mechanical Aspects of Composite Tape LayingJournal of Composite Materials, 1995
- Sequential crystallization kinetics of poly(p‐phenylene sulfide) doped with carbon or graphite particlesJournal of Applied Polymer Science, 1995
- Thermal analysis of thermoplastic matrices for advanced composite materials: poly(phenylene sulphide)Thermochimica Acta, 1992
- Failure mechanisms in continuous carbon-fibre reinforced PEEK compositesComposites Science and Technology, 1989
- The crystallinity of poly(phenylene sulfide) and its effect on polymer propertiesJournal of Applied Polymer Science, 1976
- Some aspects of nonisothermal crystallization of polymers. III. Crystallization during melt spinningJournal of Applied Polymer Science, 1974