Abstract
This paper presents the results of industrial‑scale trials of a technology for producing high‑purity zirconium and hafnium tetrafluorides. Nuclear‑grade purity of the zirconium and hafnium nitrate salts is achieved through the high extraction kinetics enabled by the EC-250 and CET-125 centrifugal extractors. It was demonstrated that, to ensure complete conversion of zirconium and hafnium into insoluble fluorides, the solutions must first be concentrated to saturation by vacuum evaporation at 70…95 °C. The tetrafluoride monohydrates of zirconium and hafnium were precipitated using 40% HF and anhydrous hydrogen fluoride as the precipitating agents. The lowest residual content of zirconium and hafnium in the mother liquor was obtained when using anhydrous hydrogen fluoride. Removal of the water of crystallization was accomplished by drying at 120 °C, followed by thermal treatment of the salts at 650 °C under a flow of hydrogen fluoride and dry argon. The resulting fluorides, obtained in the β‑phase, exhibited a purity of 99.9% and a moisture content below 0.05%. They fully met the requirements for the standard electrolysis process based on K₂ZrF₆ and K₂HfF₆. Both salts successfully completed a full cycle of process validation, during which zirconium and hafnium powders with a purity of no less than 99.85% were produced.

This publication has 11 references indexed in Scilit: