Preparation and characterization of opuntia‐cladode fiber and citron peel biochar toughened epoxy biocomposite
- 8 August 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (9) , 6571-6577
Abstract
In this research, citron peel biochar and opuntia‐cladode fibers (OCF) reinforced epoxy composites were fabricated and characterized for mechanical, wear, and electrical properties. The biochar was prepared from the waste peels of citron edible fruit whereas the opuntia fiber was from the cladode of the opuntia plant. The laminates were fabricated by hand layup process and evaluated in accordance with the ASTM standards. The results revealed that the mechanical properties such as tensile strength, flexural strength, impact toughness, hardness and adhesion strength were increased by 36.2%, 30.6%, 91.3%, 1.1%, and 5.3% for composite designation EC containing 30 vol% of OCF. Similarly, the addition of citron biochar of 2 vol% increased the load bearing and dielectric properties. However, the inclusion of 30 vol% of OCF on composite designation EC the sp. wear rate recorded 0.018 mm 3 /Nm. Similarly, the lowest coefficient of friction and sp. wear rate is observed to be 0.42 and 0.008 mm 3 /Nm for the composite with 2.0 vol% biochar. The ECO 4 composite designation represented a maximum dielectric constant and dielectric loss of about 7.4 and 1.1, respectively. The SEM fractography demonstrates that the silane‐treatment strengthened the fiber‐matrix interface and improved the interlocking mechanism. Such mechanically robust, wear‐resistant improved and electrically conductive composites could be utilized in applications such as industrial sectors, spacecraft, automobile parts, packaging industries, and electrical appliances.Keywords
This publication has 21 references indexed in Scilit:
- Risk Evaluation of Pyrolyzed Biochar from Multiple WastesJournal of Chemistry, 2019
- Low Velocity Impact and Mechanical Behaviour of Shot Blasted SiC Wire-Mesh and Silane-Treated Aloevera/Hemp/Flax-Reinforced SiC Whisker Modified Epoxy Resin CompositesSilicon, 2019
- Structure-property relationship of PLA-Opuntia Ficus Indica biocompositesComposites Part B: Engineering, 2019
- Waste shell powders as valuable bio- filler in gypsum plaster – Efficient waste management technique by effective utilizationJournal of Cleaner Production, 2019
- Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio compositeComposites Part A: Applied Science and Manufacturing, 2019
- Green process for fibrous networks extraction from Opuntia (Cactaceae): Morphological design, thermal and mechanical studiesIndustrial Crops and Products, 2018
- Polymer composites for tribological applicationsAdvanced Industrial and Engineering Polymer Research, 2018
- Opuntia (Cactaceae) plant compounds, biological activities and prospects – A comprehensive reviewFood Research International, 2018
- Microwave-shielding behavior of silanized Cu and Cu–Fe3O4 compound particle-reinforced epoxy resin composite in E-, F-, I-, and J-band frequenciesPolymer Bulletin, 2018
- Thermo-mechanical characterization of siliconized E-glass fiber/hematite particles reinforced epoxy resin hybrid compositeApplied Surface Science, 2016