Abstract
The BETO-funded PNNL collaboration with LanzaTech, Inc. utilizes patented technology to address the need for low aromatic jet fuel blendstocks. The PNNL/LanzaTech alcohol-to-jet (ATJ) process converts ethanol from LanzaTech’s syngas fermentation process to jet-range isoparaffins. The aim of this Cooperative Research Development Agreement (CRADA) project was to improve the commercial viability of the LanzaTech/ PNNL ATJ process by developing two new co-product options. Two Focus Areas (FA) were explored: FA1) Increasing the RON of the lighter-than-jet gasoline fraction above 98; and FA2) Creating a synthetic lubricant base oil from the heavier-than-jet fraction. For FA 1, multiple processing approaches were evaluated, and RONs ranging from 96-100 were obtained, each comprising different processing costs. The most cost effective approach identified was a single-step process and yielded a liquid product of 97. Thus, additional development is required to obtain a RON > 98. We will continue work on this focus area with separate Direct Funding Opportunity (DFO) funding within the DOE-BETO Co-Optima Consortium (expected to begin Q2-FY21). Experimental work will focus on i) increasing single pass conversion to > 50%, and ii) obtaining a > 98 RON product. Technoeconomic analysis performed in this project suggests cost competitiveness provided these technical targets can bemore » met. For FA2, multiple approaches were evaluated for increasing the viscosity index (VI) of the heavier-than-jet fraction to at least 120 in order to meet ASTM specifications for a Group III Base Oil (ASTM D6074). All other ASTM specifications are already met. A viscosity index of 115 was obtained, and with minimal undesirable cracking products. We believe a VI of 115 is about the highest possible from a catalytic approach, per review of the patent literature. In order to further increase the VI to > 120 we believe additives and/or liquid-liquid extraction is required. TEA performed earlier in the project suggests cost competitiveness with market prices assuming cracking byproducts are kept < 10 wt.%. If TEA updated with this additional processing still projects economic feasibility next steps could be taken in a subsequent effort. « less