JLJohnny Saavedra Lopez

Johnny Saavedra Lopez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Johnny Saavedra Lopez has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated Capture and Conversion of CO2 into Materials (IC3M): Expanding IC3M for C1 and C2 Production: Final Report

    by Pacific Northwest National Laboratory, Robert Dagle, Pacific Northwest National Laboratory (Pnnl), Jotheeswari Kothandaraman, David Heldebrant, Johnny Lopez, Michael Hubbard, Yuan Jiang, Cadianne Chambers, Jim Floyd, et al.

    This report summarizes major accomplishments from the DOE–FECM-funded Integrated Capture of CO2 into Materials (IC3M) program, launched in 2023 with 20% cost share from SoCalGas, to advance PNNL’s capture-to-conversion platform for producing CO2-derived fuels and chemicals. Building on earlier DOE–TCF successes, the project significantly advanced integrated CO2 capture and conversion, catalyst innovation, solvent durability understanding, and techno-economic competitiveness, while expanding IC3M to multiple product pathways. A key milestone was the first semi-closed-loop demonstration of the IC3M process, integrating CO2 capture using the EEMPA solvent with catalytic conversion in PNNL’s TCCS reactor. The system achieved stable operation for eight continuous hours, validating that capture and conversion can be combined in a unified, steady-state process—an essential step toward pilot-scale deployment. Catalyst development delivered two high-performing systems, Pt/MoO3 and Pt/ZrO2, each maintaining stable methanol production for >100 hours; Pt/ZrO2 achieved nearly 100% selectivity, marking a major advancement in integrated methanol synthesis. A comprehensive TEA showed the 2024 state-of-technology reducing methanol minimum selling price by ~30% versus 2022 baselines and >25% lower costs than conventional separate capture and conversion (SC3M), confirming clear economic advantages of the IC3M architecture. IC3M also demonstrated flexibility across multiple CO2-derived products: formate synthesis; >90% single-pass conversion to methane, with Ru/Al2O3 achieving >99% conversion and Ni/TiO2 identified as a cost-effective alternative; and a first-of-its-kind one-step co-production of methanol and glycol with >75% selectivity, 5× productivity gains, and life-cycle analysis showing potentially negative-emission performance. Extensive solvent-durability testing revealed clear structure–stability trends, identifying DSBA and several substituted amines as highly durable (<5% degradation) and showing that solvent pH and temperature are the primary determinants of lifetime and selectivity. These results indicate that process-level adjustments may extend solvent longevity without requiring changes to the current EEMPA structure. Future work should focus on deepening our understanding of how pH and temperature govern solvent behavior under IC3M conditions The project produced a strong scientific and intellectual-property portfolio, including four published papers, one patent application, and multiple manuscripts in peer review or preparation, along with numerous conference presentations. Collectively, these results establish IC3M as a leading pathway for economically competitive, flexible, and low-carbon CO2 utilization.

  • Open Access

    High-Efficiency Chlorine Isotope Separation using Microchannel Distillation

    by Mark N. McDonald, Patrick S. McNeff, Johnny Saavedra-Lopez, Paul H. Humble, Marsobyn Salalila, Jason Serkowski, Kenny Horkley, Tyler Schlieder, Dan R. Bottenus

    Molten chloride fast reactors require chlorine enriched in ³⁷Cl to reduce neutron capture losses and avoid the formation of corrosive and long-lived radioactive byproducts associated with ³⁵Cl. However, the small mass difference between chlorine isotopes makes industrial-scale enrichment challenging with current separation technologies. Here, we investigate distillation of hydrogen chloride as a near-term separation method, drawing on microchannel distillation concepts to achieve a large vapor-liquid interfacial area and low mass-transfer resistance in a compact column. We designed and tested a 2 m tall batch distillation column and characterized its height equivalent to a theoretical plate (HETP) for two packing media. An alumina foam packing achieved up to 264 separation stages and an HETP of 0.76 cm, while a nickel superalloy honeycomb packing achieved 240 stages and an HETP of 0.84 cm. Extrapolating from the alumina column, we project that reaching enrichment levels suitable for reactor applications would require a 64 m column for 90% ³⁷Cl and 108 m for 99%, at an energy cost of 5 kWh per gram of ³⁷Cl product. Our results demonstrate that microchannel distillation offers a viable route to enriching chlorine isotopes for near-term reactor deployment.

  • Open Access

    Single step simultaneous production of methanol and glycol from epoxide, CO 2 and H 2 using heterogeneous Cu-based catalysts

    by Jotheeswari Kothandaraman, Yuan Jiang, Johnny Saavedra Lopez, Alexander B. Bard, Michael L. Hubbard, David J. Heldebrant, Robert A. Dagle

    Here, for the first time, we coproduce two value-added chemicals, methanol and propylene glycol, from CO 2 , H 2 , and propylene oxide using a heterogeneous Cu catalyst and an amine-based co-catalyst, achieving >80% selectivity.

  • Open Access

    Novel Method for Domestic Stable Isotope Production (CRADA #667) Final Report

    by Usdoe, Mark McDonald, Richland Pacific Northwest National Laboratory (Pnnl), Johnny Saavedra Lopez, Paul Humble, Marsobyn Salalila, Lawrence Horkley, Patrick McNeff, Jason Serkowski, Tyler Schlieder, et al.

    This report presents the progress achieved on our chlorine isotope separation efforts in the CRADA #667 agreement. We used a microchannel distillation (MCD) packing structure to enrich HCl isotopes (H35Cl, H37Cl) and an isotachophoresis (ITP) separation to enrich ionic chloride species (35Cl- and 37Cl-). A 2 m tall MCD column was constructed and achieved 264 separation stages over several days, which is well above the goal of 50 stages outlined in the CRADA. The resulting height equivalent to a theoretical plate (HETP) was 0.76 cm. ITP tests were run ~ 24 hours and achieved a single-stage separation factor of 1.559.

  • Open Access

    Novel Method for Domestic Stable Isotope Production

    by Usdoe, Mark N. McDonald, Johnny Saavedra Lopez, Paul H. Humble, Marsobyn Salalila, Lawrence K. Horkley, Patrick S. McNeff, Jason E. Serkowski, Tyler Schlieder, Daniel R. Bottenus

    This report presents the progress achieved on our chlorine isotope separation efforts in the CRADA #667 agreement. We used a microchannel distillation (MCD) packing structure to enrich HCl isotopes (H35Cl, H37Cl) and an isotachophoresis (ITP) separation to enrich ionic chloride species (35Cl- and 37Cl-). A 2 m tall MCD column was constructed and achieved 264 separation stages over several days, which is well above the goal of 50 stages outlined in the CRADA. The resulting height equivalent to a theoretical plate (HETP) was 0.76 cm. ITP tests were run ~ 24 hours and achieved a single-stage separation factor of 1.559.

  • Open Access

    High energy content bi- and mono-cycloalkane and iso-alkane jet blending mixtures derived from ethanol

    by Robert A. Dagle, Nickolas Riedel, Zhibin Yang, Johnny Saavedra Lopez, Alia Cooper, Michael Thorson, Louis Edwards Caceres-Martinez, Wan Tang Jeff Zhang, Hilkka I. Kenttämaa, Gozdem Kilaz, et al.

    The aromatization of ethanol-derived olefinic intermediates provides a route forward to high energy density synthetic aviation fuel (SAF) with favorable O-ring seal swell properties.


  • Microchannel reactive distillation for the conversion of aqueous ethanol to ethylene

    by Johnny Saavedra-Lopez, Stephen D. Davidson, Paul H. Humble, Dan R. Bottenus, Vanessa Lebarbier Dagle, Yuan Jiang, Charles J. Freeman, Ward E. TeGrotenhuis, Robert A. Dagle

  • Open Access

    Reactive direct air capture of CO 2 to C–C coupled products using multifunctional materials

    by Shazia Sharmin Satter, Johnny Saavedra Lopez, Michael L. Hubbard, Yuan Jiang, Robert A. Dagle, Jotheeswari Kothandaraman

    A single sorbent-catalytic (non-noble metal) material has been developed for the integrated direct air capture and catalytic conversion of captured CO 2 into C-C coupled products.


  • Integrated Capture and Conversion of CO2 to Methane Using a Water‐lean, Post‐Combustion CO2 Capture Solvent

    by Jotheeswari Kothandaraman, Johnny Saavedra Lopez, Yuan Jiang, Eric D. Walter, Sarah D. Burton, Robert A. Dagle, David J. Heldebrant

    Integrated carbon capture and conversion of CO2 into materials (IC3M) is an attractive solution to meet global energy demand, reduce our dependence on fossil fuels, and lower CO2 emissions. Herein, using a water‐lean post‐combustion capture solvent, [N‐(2‐ethoxyethyl)‐3‐morpholinopropan‐1‐amine] (2‐EEMPA), >90 % conversion of captured CO2 to hydrocarbons, mostly methane, is achieved in the presence of a heterogenous Ru catalyst under relatively mild reaction conditions (170 °C and 2 pressure). The catalytic performance was better in 2‐EEMPA than in aqueous 5 m monoethanol amine (MEA). Operando nuclear magnetic resonance (NMR) study showed in situ formation of N‐formamide intermediate, which underwent further hydrogenation to form methane and other higher hydrocarbons. Technoeconomic analyses (TEA) showed that the proposed integrated process can potentially improve the thermal efficiency by 5 % and reduce the total capital investment and minimum synthetic natural gas (SNG) selling price by 32 % and 12 %, respectively, compared to the conventional Sabatier process, highlighting the energetic and economic benefits of integrated capture and conversion. Methane derived from CO2 and renewable H2 sources is an attractive fuel, and it has great potential as a renewable hydrogen carrier as an environmentally responsible carbon capture and utilization approach.


  • Open Access

    Improved Value of the Gasoline and Fuel Oil Co-Product Fractions Generated by the PNNL/LanzaTech Alcohol-to-Jet Process (Final Report)

    by Robert A. Dagle, Vanessa Dagle, Johnny Saavedra Lopez

    The BETO-funded PNNL collaboration with LanzaTech, Inc. utilizes patented technology to address the need for low aromatic jet fuel blendstocks. The PNNL/LanzaTech alcohol-to-jet (ATJ) process converts ethanol from LanzaTech’s syngas fermentation process to jet-range isoparaffins. The aim of this Cooperative Research Development Agreement (CRADA) project was to improve the commercial viability of the LanzaTech/ PNNL ATJ process by developing two new co-product options. Two Focus Areas (FA) were explored: FA1) Increasing the RON of the lighter-than-jet gasoline fraction above 98; and FA2) Creating a synthetic lubricant base oil from the heavier-than-jet fraction. For FA 1, multiple processing approaches were evaluated, and RONs ranging from 96-100 were obtained, each comprising different processing costs. The most cost effective approach identified was a single-step process and yielded a liquid product of 97. Thus, additional development is required to obtain a RON > 98. We will continue work on this focus area with separate Direct Funding Opportunity (DFO) funding within the DOE-BETO Co-Optima Consortium (expected to begin Q2-FY21). Experimental work will focus on i) increasing single pass conversion to > 50%, and ii) obtaining a > 98 RON product. Technoeconomic analysis performed in this project suggests cost competitiveness provided these technical targets can bemore » met. For FA2, multiple approaches were evaluated for increasing the viscosity index (VI) of the heavier-than-jet fraction to at least 120 in order to meet ASTM specifications for a Group III Base Oil (ASTM D6074). All other ASTM specifications are already met. A viscosity index of 115 was obtained, and with minimal undesirable cracking products. We believe a VI of 115 is about the highest possible from a catalytic approach, per review of the patent literature. In order to further increase the VI to > 120 we believe additives and/or liquid-liquid extraction is required. TEA performed earlier in the project suggests cost competitiveness with market prices assuming cracking byproducts are kept < 10 wt.%. If TEA updated with this additional processing still projects economic feasibility next steps could be taken in a subsequent effort. « less